1999 Jeep Wrangler Performance and Racing Products

Essential Performance and Racing Products for 1999 Jeep Wranglers

Omix – Tie Rod Assembly (Part No.18052.04)

Tie Rod Assembly

from

$102.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Includes Tube; Ends And Hardware
  • OE Style
  • Direct Fit
See More

Energy Suspension – Body Mount Set (Part No.2.4107R)

Body Mount Set

from

$129.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Energy Suspension – Coil Spring Isolator Set (Part No.2.6108R)

Coil Spring Isolator Set

from

$54.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Lasts from 3 to 10 Times Longer
  • Assemble to Chassis Same Way as OEM
  • Maintains Factory Ride Characteristics
  • Simple Way to Increase Vehicle Height
See More

Energy Suspension – Control Arm Bushing Set (Part No.2.3106G)

Control Arm Bushing Set

from

$111.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Rancho – U-Bolt Kit (Part No.RS721)

U-Bolt Kit

from

$56.99
Replace your old or broken U-bolts with these high strength Rancho replacement U-bolt kits. These kits will work with a stock or an aftermarket leaf spring pack.

Product Features:
  • These replacement U-bolts are for Rancho suspension systems only. Do not use them on other suspension kits.
  • After 100 miles of use and after every off-road use, inspect all U-bolts for proper torque values.
  • Made from high strength steel
  • Works with a stock or an aftermarket leaf spring pack
  • Sold in a master quantity of 15
See More

Energy Suspension – Control Arm Bushing Set (Part No.2.3107R)

Control Arm Bushing Set

from

$112.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Accel – Tst Jeep 94-99 4.0L Ho Efi (Part No.TST16)

Tst Jeep 94-99 4.0L Ho Efi

from

$108.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:
  • Complete Super Tune Kit
  • 8mm Spiral Core Wires
  • Accel Classic Core Plugs
  • High Performance Cap And Rotor
  • Reduced Emissions
See More

Omix – Oil Pump (Part No.17433.13)

Oil Pump

from

$145.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Metal
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Energy Suspension – Track Arm Bushing Set (Part No.2.7103R)

Track Arm Bushing Set

from

$21.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Omix – Drive Shaft (Part No.16590.23)

Drive Shaft

from

$774.99
Has your Jeep’s front driveshaft broken or the U-joints wore out? Can’t go off road until it’s fixed? Omix-ADA offers a wide variety of stock replacement front driveshafts. Get back on the trail to see what you’re missing.

Product Features:
  • Front
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

aFe POWER – Momentum GT Cold Air Intake: Gain up to 15 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-76202)

Momentum GT Cold Air Intake: Gain up to 15 Horsepower! Dry Air Filter For Easy Maintenance

from

$454.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:
  • 1-Piece Housing
  • 5 Layer Performance Air Filter
  • Premium Hardware
See More

Omix – Master Clutch Kit; 4.0L (Part No.16902.19)

Master Clutch Kit; 4.0L

from

$304.99
Is your clutch chattering or slipping? Maybe you are just replacing the clutch while you have the engine or transmission out? Omix-ADA offers a Master clutch kit for your Jeep that includes the pressure plate, clutch disc, throw-out bearing, and fork.

Product Features:
  • 10.5 in.
  • OE Style
  • Direct Fit
See More

Energy Suspension – MasterBshKt (Part No.2.18108R)

MasterBshKt

from

$777.99
MasterBshKt

Energy Suspension – High Performance Transmission Mount for Street & Racing Vehicles (Part No.3.1108G)

High Performance Transmission Mount for Street & Racing Vehicles

from

$41.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:
  • Unique Safety Interlock Design
  • Impervious to Vehicle Oils and Chemicals
  • Strong Enough Too Handle High Performance
See More

Rancho – rockGEAR Differential Cover (Part No.RS6209)

rockGEAR Differential Cover

from

$222.99
Designed to shield your differential from direct contact in severe off-road conditions, the Rancho® rockGEAR® differential cover for the Jeep® Wrangler TJ and JK is manufactured from high-strength nodular iron for added axle and internal gear protection.

Product Features:
  • COMPATIBILITY — Fits Jeep Wrangler TJ and JK, Dana 44
  • BUILT FOR THE TRAIL — Protects differential cover from rocks and other obstacles while off-roading, rock crawling and trail riding
  • ADDED PROTECTION — Mounts to Dana 44 differential for added axle and internal gear protection
  • EXTRA STRENGTH — Ribbed external construction for added strength
  • RESISTS CORROSION — Durable red powder-coat finish resists rust and corrosion
  • ENGINEERED TO LAST — High-strength ductile iron steel construction for added axle and internal gear protection
  • ACCESS FOR FILLING — Off-set, oversized fill plug for increased fluid capacity and easier/quicker filling
See More

MSD Ignition – Harness; Dodge/Chrysler; 98-03 (Part No.8884)

Harness; Dodge/Chrysler; 98-03

from

$66.99
This MSD to Dodge harness is designed to provide a splice free and simple installation of an MSD Ignition control to late model Dodge vehicles equipped with the coil.

Product Features:
  • Plug-In Harness w/Color Coded Wires
  • No Cutting Or Splicing
  • Quick Easy Installation
  • Provides A Direct Plug-In Installation
  • When Adding An MSD Ignition Control
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-1514-1)

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Powertrax – Lock Right Locker (Part No.2415-LR)

Lock Right Locker

from

$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.2.5110G)

    Sway Bar Bushing Set

    from

    $31.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.17222)

    Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval

    from

    $91.99
    DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • Stainless steel construction for lifelong protection
    • 100% welded design for maximum durability
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
    See More

    Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.17283)

    Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval

    from

    $156.99
    DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • Stainless steel construction for lifelong protection
    • Polished finish for a show quality shine
    • Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    See More

    Rugged Ridge – Skid Plate (Part No.18003.40)

    Skid Plate

    from

    $164.99
    The Evaporator Skid Plate is constructed of durable 3/16 Inch thick black powder coated steel, and mounts to existing body holes using the factory hardware. It helps transfer the load of an impact away from the evaporator tank and to the frame.

    Product Features:
    • Black Powdercoated
    • 3/16 in. Steel
    • Easy to Install
    See More

    Rugged Ridge – Heavy Duty Differential Skid Plate (Part No.16597.35)

    Heavy Duty Differential Skid Plate

    from

    $114.99
    Protect your factory differential cover with these heavy duty skid plates. Designed to fit the contours of your stock differential cover and made of durable 3/16-inch black powdercoated steel, these skid plates will help you slide over obstacles.

    Product Features:
    • Black Powder Coated
    • 3/16 in. Steel
    • Use w/ Factory Diff Cover
    • Mounting Hardware Included
    See More

    Rugged Ridge – Skid Plate; Differential; Jeep logo; for Dana 35 (Part No.DMC-16597.35)

    Skid Plate; Differential; Jeep logo; for Dana 35

    from

    $139.99
    Protect your factory differential cover with these heavy-duty skid plates. Designed to fit the contours of your stock differential cover with the distinctive Jeep logo etched into the steel, these heavy duty skids look great while providing extra protection.

    Product Features:
    • Black Powder Coated
    • 3/16 in. Steel
    • Use w/ Factory Diff Cover
    • Mounting Hardware Included
    • Jeep Logo
    See More

    Upgrade your 1999 Jeep Wrangler with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1999 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Performance and Racing Products for the 1999 Jeep Wrangler, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1999 Jeep Wrangler at great prices. Our Performance and Racing Products inventory for this model ranges from just $13.99 to $1,659.99, with an average price of $212.32. Our 40 Performance and Racing Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 1999 Jeep Wrangler without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1999 Jeep Wrangler, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N Accel, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. With 332 customer reviews and counting, our 1999 Jeep Wrangler Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1999 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 1999 Jeep Wrangler!

    Best-Selling Performance Ignition Products for 1999 Jeep Wranglers

    Enhance the driving experience in your Jeep with 4 quality Performance Ignition Product components, starting at $66.99.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

    High-Performance Ignition Coil - Direct OE Fit

    from

    $72.39
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

    Product Features:
    • 10-15% More Energy
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Standard Motor Products SMP Uf-198
    • MSD 8228
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    MSD Ignition – Harness; Dodge/Chrysler; 98-03 (Part No.8884)

    Harness; Dodge/Chrysler; 98-03

    from

    $66.99
    This MSD to Dodge harness is designed to provide a splice free and simple installation of an MSD Ignition control to late model Dodge vehicles equipped with the coil.

    Product Features:
    • Plug-In Harness w/Color Coded Wires
    • No Cutting Or Splicing
    • Quick Easy Installation
    • Provides A Direct Plug-In Installation
    • When Adding An MSD Ignition Control
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Most Popular 1999 Jeep Wrangler Performance Engines

    Customize your Jeep with 1 Performance Engines products like Performance Engine Oil Pumps, all priced under $145.99.

    Omix – Oil Pump (Part No.17433.13)

    Oil Pump

    from

    $145.99
    Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

    Product Features:
    • Metal
    • OE Style
    • Direct Fit
    • Limited 5 Year Warranty
    See More

    Top Picks for 1999 Jeep Wrangler Performance Exhaust Products

    Upgrade Jeep Wranglers with top-quality Performance Exhaust Products parts, including 1 OEM and aftermarket selections for your 1999 model.

    Flowmaster Inc. – 60 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.952462)

    60 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound

    from

    $185.99
    The 60 series incorporates Flowmaster’s patented Delta Flow technology to produce a mellow tone, improved power and throttle response on smaller displacement 4 and 6 cylinder vehicles. Generally suited to rear mount installations, use of larger diameter tailpipe/tip will create a deeper tone that is evident both inside and outside the vehicle. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    In-Demand Performance Distributors for 1999 Jeep Wranglers

    Select from 1 premium Performance Distributors parts for your 1999 Jeep Wrangler.

    Accel – Tst Jeep 94-99 4.0L Ho Efi (Part No.TST16)

    Tst Jeep 94-99 4.0L Ho Efi

    from

    $108.99
    Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

    Product Features:
    • Complete Super Tune Kit
    • 8mm Spiral Core Wires
    • Accel Classic Core Plugs
    • High Performance Cap And Rotor
    • Reduced Emissions
    See More

    Most Sold 1999 Jeep Wrangler Performance Oil Filters

    Explore our best-selling Jeep parts for the 1999 Wrangler among 1 OEM and aftermarket options starting from $17.99.

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Top-Rated Performance and Racing Products Brands For Your 1999 Jeep Wrangler

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1999 Jeep Wranglers. Below you’ll find some of our best rated Performance and Racing Products from K&N and Accel, and more. Performance and Racing Products from these brands that fit a 1999 Wrangler start at just $17.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular K&N 1999 Jeep Wrangler Performance and Racing Products

    When it comes to maintaining or upgrading your 1999 Jeep Wrangler, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1999 Jeep Wrangler. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $183.99. Plus, with over 144 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
    from
    $349.99

    (24)

    Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

    “The horsepower increase was tremendous for accelerating while entering highways. Still waiting to see what type of fuel mileage increase there will b”

    Popular Accel 1999 Jeep Wrangler Performance and Racing Products

    Accel auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1999 Jeep Wrangler owner should feel confident when installing genuine Accel parts in their vehicle. To ensure the best fit and performance for your 1999 Wrangler, Advance Auto Parts carries a full inventory of 2 Accel Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Accel Performance and Racing Products range from $72.39 to $108.99, plus, with more than 34 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    High-Performance Ignition Coil - Direct OE Fit
    from
    $72.39

    (18)

    High-Performance Ignition Coil – Direct OE Fit

    “Great coil for my 5.9 magnum block noticed a big difference in performance!!”

    Tst Jeep 94-99 4.0L Ho Efi
    from
    $108.99

    (16)

    Tst Jeep 94-99 4.0L Ho Efi

    “quality products,used before with good results”

    FAQs for 1999 Jeep Wrangler Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1999 Jeep Wranglers?

    Out of 40 Performance and Racing Products that fit 1999 Jeep Wranglers, the following parts are the top sellers:

    What’s the price range for 1999 Jeep Wrangler Performance and Racing Products?

    Performance and Racing Product prices for the 1999 Jeep Wrangler start at $13.99 and go up to $1,659.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1999 Jeep Wrangler?

    The average price for Performance and Racing Products for the 1999 Jeep Wrangler is $212.32. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Jeep Wrangler model years?

    Yes, we currently carry Performance and Racing Products for 36 model years of Jeep Wranglers between 1987 and 2024. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

    What are the cheapest Performance and Racing Products for my 1999 Jeep Wrangler?

    The cheapest 1999 Jeep Wrangler Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1999 Jeep Wrangler?

    Out of 332 reviews by customers, our 1999 Jeep Wrangler Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1999 Jeep Wrangler and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1999 Jeep Wrangler?

    Can I get help with 1999 Jeep Wrangler Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.

    What is your return policy for Jeep Wrangler Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Jeep Wrangler Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.