from

$6.23

Radiator Drain Plug

from

$26.75

Leaks, be gone. Dorman’s Engine Water Pump Inlet Tube is hardily built to counter the most common cause of fractures: corrosion due to heat cycling. Safeguard your engine by ensuring proper coolant circulation.

Product Features:

Gaskets and clamps included (where applicable)
Direct replacement for a proper fit every time
Many inlet tubes are powder coated for increased resilience
Lightweight steel and/or rubber construction eases installation

from

$85.99

Product Features:

OE performance, fit, and appearance
Designed, tested, and built by application
Out of box installation

from

$48.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$34.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$26.99

All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications

from

$34.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$22.99

New Standard Replacement A/C Accumulator

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$61.39

Thermostat

from

$22.92

Re-engineered to address common failure points in the original equipment, Dorman’s Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. This is more than a replacement; it’s an upgrade. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:

Direct replacement for a proper fit every time
Hoses slide on for easy installation
High-quality plastic or metal construction
Includes all hardware necessary for a complete repair (where applicable)

from

$68.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$108.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
Complete package – assembly is designed with the same materials and components as the original part
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$34.99

This engine water pump inlet tube is designed to match the fit and function of the original tube on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine water pump inlet tube is designed to match the fit and function of the original tube on specified applications
Restores functionality – reliable replacement for an original part that has failed due to corrosion from heat and water cycling
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$57.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$42.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$52.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$19.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$414.99

HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of A/C Compressor with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!

Product Features:

Pre-filled oil in it with the correct amount of oil
Tested for Quality, Durability, and Reliability
Brand New OE- No Core Exchange Required
Direct Original Equipment Replacement

from

$10.49

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$49.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$23.29

High quality OE replacement part with all components needed to complete the job

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$59.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable
100% virgin resin material to insure durability
100% leak tested
All-in-one bolt on solution for a complete repair
Includes quality thermostat

from

$32.99

Air Conditioning O-Ring Kit

from

$113.99

US Motor Works Professional Series Water Pump with Fan Clutch are designed to replace the mechanical components of a cooling system. A proper water pump replacement should include a new fan clutch as the two are connected to the same shaft and work together to move the air and cooling fluid. Replacing one without the other can damage the new part and cause repeat work or engine trouble. This matched set will allow your vehicle continued operation in the demanding environment of today’s engine. All components are brand new and QA inspected for perfect fit and function. Restore your cooling power by installing a US Motor Works Professional Series Water Pump with Fan Clutch.

Product Features:

Fan clutch mounts to the water pump and should be replaced at the same time.
Matched set for proper water pump or fan clutch replacement
Includes mounting hardware, gaskets and accessories as required.
Complete mechanical cooling parts replacement
Factory tested and 100% new product
Meets or exceeds OEM quality

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features: