1998 Ford Windstar Cooling and Climate Controls

Essential 1998 Ford Windstar Cooling and Climate Controls

KAI – A/C Expansion Valve, Rear, V6 Engine (Part No.ACX010962)

A/C Expansion Valve, Rear, V6 Engine

from

$29.99
New Standard Replacement A/C Expansion Valve, Rear, V6 Engine

Product Features:
  • Rear, V6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Motorcraft – Original Equipment Radiator Cap (Part No.G1010415176MTR)

Original Equipment Radiator Cap

from

$10.79
The Motorcraft Original Equipment Radiator Cap is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • Standard and safety vent radiator pressure caps available
  • Extensive coverage for most cars and trucks, as well as farm and construction equipment
  • Swivel-seal radiator caps are designed to provide increased durability and can be removed without damage to the rubber atmospheric seal
  • Zinc-plated to resist corrosion and rust
  • Pressure valve springs are made of stainless steel to maintain calibrated pressure throughout the service life
  • Rubber pressure valve gasket resists high temperatures and deterioration from coolant and additives
  • Pressure and vacuum relief features help extend radiator and hose life
  • Prevent accidental cap removal with positive low-pressure stop feature
See More

Carquest Premium – HVAC Blower Switch Connector (Part No.PTA2855)

HVAC Blower Switch Connector

from

$36.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Standard – Reman Ford FS10 Compressor w/ Clutch (Part No.DW57157)

Reman Ford FS10 Compressor w/ Clutch

from

$169.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Radiator Cap Tester Adapter

from

$17.79
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Mahle – Water Pump Hsng Gask (Part No.G3031195375MAH)

Water Pump Hsng Gask

from

$5.08
Water Pump Hsng Gask

Carquest Premium – A/C New; w/ Clutch; w/ FS10 Compressor (Part No.T58158)

A/C New; w/ Clutch; w/ FS10 Compressor

from

$218.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C Condenser (Part No.1069)

A/C Condenser

from

$133.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specificat

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Carquest – HVAC Blower Control Switch (Part No.HS306)

HVAC Blower Control Switch

from

$35.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our parts are 100% tested to verify both mechanical and electrical switching performance.
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Factory Air – New Ford FS10 Clutch Assembly w/ Coil (Part No.47867)

New Ford FS10 Clutch Assembly w/ Coil

from

$129.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85174)

Coolant Housing/Water Outlet: Gasket Included

from

$27.49
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Radiator Cap: 16 PSI

from

$13.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Factory Air – Green Round O-Ring (Part No.24650)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Felpro – Engine Water Pump Gasket (Part No.35414)

Engine Water Pump Gasket

from

$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1301)

HVAC Blower Motor Resistor

from

$48.49
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Motorcraft – A/C Relief Valve (Part No.R1028680239MTR)

A/C Relief Valve

from

$60.75
A/C Relief Valve

Felpro – WATER PUMP GASKET SET (Part No.ES 73048)

WATER PUMP GASKET SET

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC1705)

ABS Wheel Speed Sensor

from

$80.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14538)

Belt-Driven Fan Spacer Kit

from

$22.99
Belt-Driven Fan Spacer Kit

Carquest Premium – Engine Cooling Fan Motor Connector (Part No.PTA1339)

Engine Cooling Fan Motor Connector

from

$18.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – HVAC Temperature Control Switch Connector (Part No.PTA2069)

HVAC Temperature Control Switch Connector

from

$36.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-286)

HVAC Blend Door Actuator: 1 Piece

from

$41.49
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

Driveworks Water Pumps – Water Pump 1 EA DRIVE (Part No.58-529)

Water Pump 1 EA DRIVE

from

$69.99
Driveworks Remanufactured Water Pumps offer a complete replacement part solution, with application coverage spanning from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed O.E.M. performance, providing you a quali

Product Features:
  • 100% leak tested and hub-pull tested to promote a long, trouble-free performance life
  • Designed and manufactured with new, high-quality unitized seals from OE suppliers to ensure long, trouble-free performance
  • Each unit uses the proper bearing design as specified by the OE manufacturer to meet the specific radial torque and axial load requirements of each application to promote long bearing life and trouble-free performance
  • Supplied with high-quality mounting gasket and other seals/gaskets as applicable per application to help complete the job
  • Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
See More

Carquest Premium – A/C Accumulator (Part No.T83012)

A/C Accumulator

from

$58.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Factory Air – Green Round O-Ring (Part No.24610)

Green Round O-Ring

from

$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35617)

Standard Rotation Blower Motor Wheel

from

$24.99
Durable plastic material

Product Features:
  • Durable plastic material
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Set screw installation
  • Durable plastic material
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Set screw installation
See More

Carquest Premium – Reverse Rotation Blower Motor Wheel (Part No.35219)

Reverse Rotation Blower Motor Wheel

from

$35.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Durable Plastic Material
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Retainer clip installation
See More

Popular 1998 Ford Windstar Cooling and Climate Controls Categories

1998 Ford Windstar Cooling and Climate Controls

You count on your 1998 Ford Windstar to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 147 Cooling and Climate Controls ranging in price from $0.79 to $367.99, you’re sure to find everything you need for your 1998 Ford Windstar.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 24 different brands like Permatex, Carquest Premium, and Motorad UltraStats. 1998 Ford Windstar Cooling and Climate Controls start as low as $0.79!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 2,610 extensive product reviews on 1998 Ford Windstar Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Engine Coolant Outlet Gasket with 4.7 stars and Electric Fan – 12" Diameter with 3.5 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1998 Ford Windstar below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 1998 Ford Windstar

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Ford Windstar running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Motorad UltraStats, and even more.

Popular Motorad UltraStats Cooling and Climate Controls

You’ll find popular Motorad UltraStats brand products across Engine Cooling Parts. All are waiting to get your 1998 Ford Windstar back on the road. Some of the top-rated Motorad UltraStats products in these categories are:
Thermostat: 180 Degrees
from $18.29
(1)
Thermostat: 180 Degrees
Thermostats
Thermostat: 192 Degrees
from $14.29
(1)
Thermostat: 192 Degrees
Thermostats

Top-Rated Carquest Premium Cooling and Climate Controls


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1998 Ford Windstar, and some of our most reviewed Carquest Premium parts include:
Radiator Cap: 16 PSI
from $13.99
(193)
Radiator Cap: 16 PSI
Engine Coolant Thermostat Housing Caps
Severe Temp Automatic Adjusting Orifice Tube
from $15.99
(97)
Severe Temp Automatic Adjusting Orifice Tube
Expansion Valve and Orifice Tubes
Radiator Cap: 16 PSI
from $21.99
(41)
Radiator Cap: 16 PSI
Coolant Reservoir Caps

FAQs for 1998 Ford Windstar Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 1998 Ford Windstar?

Out of 147 Cooling and Climate Controls for the 1998 Ford Windstar, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
High Flow Thermostat: 170 Degrees
from $14.29
(16)
High Flow Thermostat: 170 Degrees
Thermostats

What are the top-rated 1998 Ford Windstar Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 1998 Ford Windstar based on customer reviews/ratings are:
Engine Coolant Outlet Gasket
from $3.99
(49)
Engine Coolant Outlet Gasket
“Part as described”
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
“Advance kicks butt”