1998 Audi A8 Quattro Drivetrains
More 1998 Audi A8 Quattro Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1998 Audi A8 Quattro, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1998 Audi A8 Quattro Drivetrains
Dorman – Rear Drive Shaft: Adjustable (Part No.976-803)
from
$1027.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ZF – Trans Case Output Sh (Part No.J7121247695ZF)
from
$18.60
Trans Case Output Sh
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)
from
$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.107)
from
$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Shaft Repair Sleeve (Part No.99215)
from
$48.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today¿s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
NTN – Differential Bearing (Part No.J7060741150NTN)
from
$39.02
Differential Bearing
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV23578)
from
$106.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV556308)
from
$115.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
National – Bearings (Part No.32010-X)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99177)
from
$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Valvoline – Import Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.820681)
from
$36.99
Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – VAL EP ATF 6/1 QT (Part No.899179)
from
$14.99
VAL EP ATF 6/1 QT
Elring – Pinion Seal (Part No.J7010130391ELR)
from
$21.42
Pinion Seal
GKN Drivetech – CV Joint Kit (Part No.K600085212LOB)
from
$299.49
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
Dansk – CV Joint Kit (Part No.K6000174750DSK)
from
$99.80
CV Joint Kit
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
GKN Drivetech – CV Boot Kit (Part No.K6010134020LOB)
from
$35.89
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
GKN Drivetech – CV Boot Kit (Part No.K6010179653LOB)
from
$23.05
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
GKN Drivetech – CV Boot Kit (Part No.K6010451985GKN)
from
$29.45
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Rein – CV Boot Kit (Part No.BKN0124)
from
$26.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)
from
$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GKN Drivetech – CV Boot Kit (Part No.K6010453767GKN)
from
$28.77
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Popular 1998 Audi A8 Quattro Drivetrains Categories
1998 Audi A8 Quattro Drivetrains
You count on your 1998 Audi A8 Quattro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 31 Drivetrains ranging in price from $5.29 to $1,583.99, you’re sure to find everything you need for your 1998 Audi A8 Quattro.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 10 different brands like DriveWorks, National, and Dorman. 1998 Audi A8 Quattro Drivetrains start as low as $5.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 192 extensive product reviews on 1998 Audi A8 Quattro Drivetrains. Some of the top-rated Drivetrains products we carry are Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter with 3.2 stars and Universal C.V. Joint Boot Kit Front Outer with 2.7 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1998 Audi A8 Quattro below to get started!
Top-Rated Drivetrains Brands For Your 1998 Audi A8 Quattro
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1998 Audi A8 Quattro running right for years to come. In our inventory you’ll find brands like DriveWorks, National, Dorman, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1998 Audi A8 Quattro back on the road. Some of the top-rated Valvoline products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1998 Audi A8 Quattro, and some of our most reviewed parts include:
FAQs for 1998 Audi A8 Quattro Drivetrains
What are the most purchased Drivetrains for the 1998 Audi A8 Quattro?
Out of 31 Drivetrains for the 1998 Audi A8 Quattro, the most popular in our inventory are:
What are the top-rated 1998 Audi A8 Quattro Drivetrains?
Top-rated Drivetrains for your 1998 Audi A8 Quattro based on customer reviews/ratings are:
from
$35.99
(11)
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter
“The only thing I could find to fit an aftermarket axle that was on the car. If your e46 330XI has a front axle with a round inner carrier instead if t”
from
$23.99
(7)
Universal C.V. Joint Boot Kit Front Outer
“This is a soft plyable Composite Material.Not like the harder cheaper boots. Very easy to use. I would get the pliers that install the strap correct”
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
