1996 Ford Thunderbird Cooling and Climate Controls

Below you will find various in-demand Ford Cooling and Climate Controls, components and accessories for your 1996 Thunderbird. Advance Auto Parts has popular Thunderbird parts like Blend Doors, Air Conditioning Parts, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Thunderbird model years including 1992, 1993, 1994, 1995, 1997, 2002, 2003, 2004, 2005 and more. Select a category of 1996 Ford Thunderbird Cooling and Climate Controls below and start saving instantly.

Popular 1996 Ford Thunderbird Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

Radiator Caps

AC Compressor Without Clutch

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

AC Clutch

AC Compressor Relays

Coolant Temperature Sensors

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Water Outlets

Engine Coolant Pipe O-Rings

Blower Motor Resistors

Air Conditioning Relays

AC Condensers

AC Compressor Bypass Pulleys

AC Line O-Rings

AC Compressor Cut-Out Relays

AC Caps and Valve Core Kits

AC Liquid Lines

Engine Water Pump Relays

Thermostat Housings

AC Relay Connectors

Thermostat Seals

Accumulator and Receiver Driers

AC Line O-Ring Kits

AC Clutch Bearings

Engine Water Pump Bypass Pipe O-Ring Kit

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

AC Discharge Lines

AC Suction Lines

Temperature Switch and Senders

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Clutch Cycle Switches

AC Line Repairs

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

AC Compressor Control Valves

Radiator Drain Plugs

AC Compressor Cut-Off Switches

AC Pressure Transducer Connectors

Coolant Fan Motor Connectors

HVAC Binary Switches

Thermostat Housing O-Rings

Coolant Temp Sending Unit Switch Connectors

AC Control Switches

HVAC Blower Switch Connectors

Radiator Cap Tester Adapters

Radiator Cap Adapters

AC Compressor Seals

AC System Seal Kits

AC Clutch Pulleys and Rims

AC Line Clip

AC Clutch Coils

HVAC Temperature Delay Relay Harness Connectors

Essential Cooling and Climate Controls for 1996 Ford Thunderbirds

from

$140.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$74.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$19.29

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$14.29

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$63.99

New Standard Replacement A/C Refrigerant Discharge Hose

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$19.99

This HVAC blower switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC blower switch connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$16.99

New Standard Replacement A/C System Valve Core And Cap Kit

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$41.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Sender Assembly literally sends engine fuel to the engine under pressure created by the fuel pump.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into Motorcraft Sender Assemblies, ensuring the most current technology.
Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.
Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.

from

$41.03

When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$32.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$54.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$20.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$16.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$23.99

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$19.99

New Standard Replacement A/C System Seal Kit, MT2520, L4 Engine

Product Features:

MT2520, L4 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$19.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$52.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$301.99

New Standard Replacement A/C Compressor, FS10, 8 Groove, V6 Engine

Product Features:

FS10, 8 Groove, V6 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$149.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$5.29

Premium quality materials for longer service life
Designed for the OE distributor as a direct replacement part

from

$54.99

BEARING

from

$47.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$21.00

A/C O-Ring Kit

from

$46.38

A/C Relief Valve

Upgrade your 1996 Ford Thunderbird with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 1996 Ford Thunderbird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Thunderbird functioning at its best. At Advance Auto Parts, we offer a wide selection of 150 Cooling and Climate Controls for the 1996 Ford Thunderbird, designed to meet your needs without breaking the bank. From Blend Door replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 1996 Ford Thunderbird at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.99 to $526.72, with an average price of $54.03. Our 150 Cooling and Climate Controls in stock come from 25 trusted brands, so you’re sure to find the right part for your 1996 Ford Thunderbird without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Ford Thunderbird, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, FELPRO, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. FELPRO and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $3.99, and at an average 5 stars rating. With 2,258 customer reviews and counting, our 1996 Ford Thunderbird Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1996 Ford Thunderbird is always ready to roll. We’re committed to providing you with everything you need to keep your Thunderbird in top shape, all in one place. Start shopping confidently below for your 1996 Ford Thunderbird!

Best-Selling Blend Doors for 1996 Ford Thunderbirds

Enhance the driving experience in your Ford with 2 quality Blend Door components, starting at $51.99.

show more show less

from

$51.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$57.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Most Popular 1996 Ford Thunderbird Air Conditioning Parts

Customize your Ford with 61 Air Conditioning Parts products like AC Compressor Without Clutch, AC Compressor With Clutch, and Expansion Valve and Orifice Tubes, all priced under $526.72.

show more show less

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$28.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$153.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All mounting hardware included
Every coil tested for proper ohms
Vehicle specific applications
Coated to prevent corrosion

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$15.99

Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$4.99

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$129.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All mounting hardware included
Every coil tested for proper ohms
Vehicle specific applications
Coated to prevent corrosion

from

$54.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$20.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$38.49

All hoses are constructed with double wall barrier hose compatible with R134A or R12; Contains gaskets, o-rings, or seals to properly replace the product; Crimp fitting connection; Application specific design

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$243.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.

from

$15.79

Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Color coded

from

$25.99

Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific

from

$58.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$63.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$28.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$228.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$18.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$19.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$20.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$24.29

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$0.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$43.05

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$44.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$129.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$14.79

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$526.72

A/C Compressor

from

$179.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$119.36

A/C Clutch

from

$60.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$16.99

New Standard Replacement A/C System Valve Core And Cap Kit

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.82

Santech Industries is a global supplier of OE quality automotive air conditioning components and A/C service kits to the aftermarket.

Product Features:

Type: Pressure
Color: Black
Fitting: M12-1.5 Female
Normal: Open
Closed: 44 PSI
Open: 24 PSI
OEM: F3AH-19E561AA

from

$36.49

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$370.52

Motorcraft manufactures a new A/C Compressor without clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

New compressors are the same components that were installed in the vehicle when it rolled off the assembly line
Forged-Aluminum Pistons – For maximum life in low-lubrication, high-temperature conditions
Tin-Coated Swashplates – For added strength and durability
Rubber-Dampened Clutch – To minimize clutch noise during engagement
Dual Center-Seam Seals – For additional leak protection

from

$302.99

New Standard Replacement A/C Compressor, FS10, 6 Groove, V8 Engine

Product Features:

FS10, 6 Groove, V8 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$257.07

A/C Compressor

from

$196.99

CARQUEST New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. CARQUEST New Compressors are designed to pump the air conditioning refrigerant through the air conditioning system to provide exceptional climate control for the passenger compartment.

Product Features:

New, with Clutch, with FS10 Compressor
Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$153.99

A/C CLUTCH NEW

from

$139.61

A/C Clutch Pulley

from

$131.97

A/C Clutch Solenoid

from

$129.99

A/C CLUTCH NEW

from

$84.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$71.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$70.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$68.99

BEARING

Top Picks for 1996 Ford Thunderbird Engine Cooling Parts

Upgrade Ford Thunderbirds with top-quality Engine Cooling Parts parts, including 77 OEM and aftermarket selections for your 1996 model.

show more show less

from

$15.79

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$14.29

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$14.29

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. With the enlarged Orpheus opening, this high flowing thermostat will allow for more gallons per second to flow. This will allow for the engine to cool down at a faster rate compared to the OE to allow for quick and precise cooling for your engine. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

Larger opening for increased coolant flow
Increased strength and durability
High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
100% tested and calibrated

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$15.79

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$12.49

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. With the enlarged Orpheus opening, this high flowing thermostat will allow for more gallons per second to flow. This will allow for the engine to cool down at a faster rate compared to the OE to allow for quick and precise cooling for your engine. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

Larger opening for increased coolant flow
Increased strength and durability
High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
100% tested and calibrated

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Manufactured for the sealing repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$140.99

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$199.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$13.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$15.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$82.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$10.49

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$9.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$176.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$9.79

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$21.99

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$6.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$27.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Color coded for easy identification
Zinc coated terminal to resist corrosion

from

$21.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Problem-solving gaskets featuring advanced sealing technologies designed specifically for the repair environment
PermaDryPlus water outlet gaskets utilize rigid carrier construction and silicone sealing beads to ensure a long-lasting seal, including those with warped housing flanges
Validated for fit, form, and function
Quality that you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$66.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$41.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$173.05

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications
Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$31.49

Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$5.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.79

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$27.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$72.77

Motorcraft gas and diesel engine water pumps contain a precision bearing to help deliver a long and efficient performance. Additionally, stamped or cast impellers meet OE pumping requirements.

Product Features:

Seal designs use sintered metal or ceramic seats
Strong cast-iron or aluminum die-cast housings
Bearing housing meets OE load requirements
Precision-ground bearings
Hubs located for proper belt alignment
Includes installation gasket

from

$41.99

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

Motorcraft Sender Assembly literally sends engine fuel to the engine under pressure created by the fuel pump.
As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into Motorcraft Sender Assemblies, ensuring the most current technology.
Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.
Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.

from

$21.49

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$16.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$5.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$24.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$42.42

The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$124.99

ENGINE WATER PUMP

from

$34.49

from

$12.85

The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:

Meets Original Equipment specifications.
Made from premium materials.
Designed to function on open cooling systems and overflow reservoir type systems.

In-Demand Blower Motor and Related Products for 1996 Ford Thunderbirds

Select from 8 premium Blower Motor and Related Products parts for your 1996 Ford Thunderbird, with prices ranging from $19.99 to $194.99.

show more show less

from

$22.05

Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$50.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$22.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$23.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$189.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$24.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$194.99

This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models.
Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs.
Restores functionality – made to perform like original equipment to restore full HVAC operation
Trustworthy quality – backed by team of engineers and quality specialists in the USA

from

$19.99

Direct replacement – this HVAC blower switch connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Sold 1996 Ford Thunderbird Heating Parts

Explore our best-selling Ford parts for the 1996 Thunderbird among 2 OEM and aftermarket options starting from $49.99.

show more show less

from

$58.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$49.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Top-Rated Cooling and Climate Controls Brands For Your 1996 Ford Thunderbird

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 1996 Ford Thunderbirds. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, FELPRO, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 1996 Thunderbird start at just $3.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 1996 Ford Thunderbird Cooling and Climate Controls

When it comes to maintaining or upgrading your 1996 Ford Thunderbird, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 1996 Ford Thunderbird. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

Popular FELPRO 1996 Ford Thunderbird Cooling and Climate Controls

FELPRO auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 1996 Ford Thunderbird owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 1996 Thunderbird, Advance Auto Parts carries a full inventory of 6 FELPRO Cooling and Climate Controls. Plus you will be keeping your Ford in peak condition while saving money because prices on these FELPRO Cooling and Climate Controls range from $3.99 to $21.49, plus, with more than 176 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$5.49

(2)

Engine Water Pump Gasket

“Have to have with the pump”

from
$9.99

(110)

Multi-Purpose O-Ring

“Seals up well”

from
$6.79

(1)

WATER PUMP GASKET SET

“It was just what I needed”

FAQs for 1996 Ford Thunderbird Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 1996 Ford Thunderbirds?

Out of 150 Cooling and Climate Controls that fit 1996 Ford Thunderbirds, the following parts are the top sellers:

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Standard Thermostat: 195 Degrees (5650002) – $15.79
Multi-Purpose O-Ring (5180902) – $9.99

What’s the price range for 1996 Ford Thunderbird Cooling and Climate Controls?

Cooling and Climate Control prices for the 1996 Ford Thunderbird start at $0.99 and go up to $526.72 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 1996 Ford Thunderbird?

The average price for Cooling and Climate Controls for the 1996 Ford Thunderbird is $54.03. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Ford Thunderbird model years?

Yes, we currently carry Cooling and Climate Controls for 46 model years of Ford Thunderbirds between 1955 and 2005. Cooling and Climate Controls are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 1997, 1995, 1994, 1993, and 1992.

What are the cheapest Cooling and Climate Controls for my 1996 Ford Thunderbird?

The cheapest 1996 Ford Thunderbird Cooling and Climate Controls we carry in stock are:

Green Round O-Ring (18890254) – $0.99
Water Pipe O-Ring (11856356) – $1.44
Green Round O-Ring (18890169) – $1.99
Engine Coolant Outlet Gasket (5780306) – $3.99
A/C Orifice Tube (11743737) – $3.99

What are the top-rated Cooling and Climate Controls that fit the 1996 Ford Thunderbird?

Out of 2,258 reviews by customers, our 1996 Ford Thunderbird Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 1996 Ford Thunderbird and their top-rated products:

Engine Cooling Parts
- High Flow Thermostat: 170 Degrees (5653495) – $14.29
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Adjustable Thermostatic Fan Control (6016936) – $22.99
Blower Motor and Related Products
- High Flow Thermostat: 170 Degrees (5653495) – $14.29
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Adjustable Thermostatic Fan Control (6016936) – $22.99

What types of Cooling and Climate Controls do you sell for my 1996 Ford Thunderbird?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 1996 Ford Thunderbird:

Can I get help with 1996 Ford Thunderbird Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Cooling and Climate Controls and more.

What is your return policy for Ford Thunderbird Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Ford Thunderbird Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1996 Ford Thunderbird Cooling and Climate Controls

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.620-118)

Carquest Premium – Blower Motor: Without Wheel (Part No.35174)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-1026)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

KAI – A/C Discharge Hose (Part No.HOS010373)

Dorman – Blower Motor Harness (Part No.645-551)

Factory Air – Green Round O-Ring (Part No.24615)

KAI – Valve Core/Cap Kit (Part No.FTT010109)

Felpro – Engine Water Pump Gasket (Part No.35414)

Motorcraft – Original Equipment (O.E.) Sender Assembly – Temperature (Part No.SW-2328)

Motorcraft – Motorcraft A/C Clutch Solenoid (Part No.R1015196677MTR)

Carquest Premium – A/C Liquid Line Hose Assembly with Captured Orifice Tube (Part No.T55602)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34163)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26715)

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA1528)

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84876)

KAI – A/C System Seal Kit (Part No.FTT010016)

Factory Air – Standard Relay (Part No.36126)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-263)

KAI – A/C Compressor, Fs10, 8 Groove, V6 Engine (Part No.ACP010215)

Carquest Premium – A/C Condenser (Part No.1057)

Carquest – A/C and Heater Relay (Part No.R3177)

Carquest Premium – Engine Coolant Temperature Sending Unit Switch Connector (Part No.PTA1217)

FAG US – BEARING (Part No.5908-VAW)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Santech – A/C O-Ring Kit (Part No.R1151317274SII)

Motorcraft – A/C Relief Valve (Part No.R1028680239MTR)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-401)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-914)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Factory Air – System Mounted Cycling Pressure Switch (Part No.36494)

Factory Air – New Ford FS10 Clutch Assembly w/ Coil (Part No.47881)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26783)

Carquest Premium – A/C Severe Temp Automatic Adjusting Orifice Tube (Part No.T38904)

Carquest Premium – A/C Orange Orifice Tube (Part No.T38639)

Factory Air – New Ford FS10 Clutch Assembly w/ Coil (Part No.47867)

National – Bearings (Part No.5106-WCC)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26715)

Factory Air – Liquid Line Orifice Tube Repair Kit w/o Orifice Tube (Part No.16150)

Carquest – A/C and Heater Relay (Part No.R3177)

Carquest Premium – A/C New, with Clutch, with FS10 Compressor (Part No.T58129)

Carquest Premium – A/C Standard Temp Automatic Adjusting Orifice Tube (Part No.T38902)

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26780)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34191)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34184)

Carquest – A/C Compressor Clutch Relay (Part No.R3189)

Carquest Standard – Reman Ford FS10 Compressor w/ Clutch (Part No.DW57129)

Carquest – Multi Purpose Relay (Part No.83A1001)

Dorman – Chrysler, GM Panel Retainer (Part No.963-056D)

Carquest Premium – Multi Purpose Relay (Part No.RAA1234)

Carquest Premium – A/C Clutch Cycle Switch Connector (Part No.PTA1128)

Factory Air – Green Round O-Ring (Part No.24650)

Driveworks – Electrical Relay (Part No.83177)

Factory Air – Green Round O-Ring (Part No.24610)

Factory Air – System Mounted Binary Pressure Switch (Part No.20924)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

Carquest Premium – A/C Condenser (Part No.1125)

Carquest Premium – Fuel Pump Relay Connector (Part No.PTA1277)

Motorcraft – A/C Compressor (Part No.R10001351280MTR)

Carquest Standard – Reman Ford FS10 Compressor w/ Clutch (Part No.DW57127)

Motorcraft – A/C Clutch (Part No.R10103036423MTR)

Carquest Premium – A/C Accumulator (Part No.T33071)

KAI – Valve Core/Cap Kit (Part No.FTT010109)

Santech – MT0202 Clutch Cycling Pressure Switch (Part No.R10512577142SII)

Carquest Premium – A/C Liquid Line Hose Assembly with Serviceable Orifice Tube (Part No.T55723)

Motorcraft – A/C Compressor w/o Clutch, New (Part No.R1000324000MTR)

KAI – A/C Compressor; Fs10; 6 Groove; V8 Engine (Part No.ACP010012)

Autopart International Inc – A/C Compressor (Part No.R10003199512API)

Carquest Premium – New Compressor with Clutch (Part No.T58127)

Carquest Premium – A/C CLUTCH NEW (Part No.T47881)

Motorcraft – A/C Clutch Pulley (Part No.R10183262908MTR)

Motorcraft – A/C Clutch Solenoid (Part No.R10153036424MTR)

Carquest Premium – A/C CLUTCH NEW (Part No.T47867)

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T55303)

Carquest Premium – A/C Accumulator With Hose (Part No.T55640)

Carquest Premium – A/C Discharge and Suction Line Hose Assembly (Part No.T56552)

FAG US – BEARING (Part No.5106-WCC)

Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13779)