1992 Ford Thunderbird Drivetrains

Essential Drivetrains for 1992 Ford Thunderbirds

USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 31 Spline (Part No.39016)

Standard Spider Gear Set For Ford 8.8", 31 Spline

from

$209.99
Product Features:
  • Spider gear kit
  • Fits Ford 8.8″ 31 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Dorman – Split CV Boot – With Quick Drying Adhesive (Part No.614-700)

Split CV Boot - With Quick Drying Adhesive

from

$42.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33299)

Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Pinion gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
  • Interlocking design makes installation much easier
See More

Powertrax – Lock Right Locker (Part No.1830-LR)

Lock Right Locker

from

$444.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Steel Cover For Ford 8.8" (Part No.32328)

    Steel Cover For Ford 8.8"

    from

    $99.99
    Yukon outer stub axle for Chrysler 9.25″ front. This axle uses a 1485 u/joint and has 33 splines.

    Product Features:
    • Fits Ford 8.8″
    • Steel
    See More

    Dorman – Help – Universal C.V. Joint Boot Kit Front Outer (Part No.03680)

    Universal C.V. Joint Boot Kit Front Outer

    from

    $23.99
    Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.

    Product Features:
    • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13045)

    Pinion Install Kit For Ford Daytona 9" Differential

    from

    $284.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits Ford 9″ with Daytona pinion support
    • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55459)

    Differential Cover Gasket

    from

    $9.79
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

    Carrier Installation Kit For Ford 8.8" Differential

    from

    $134.99
    Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

    Product Features:
    • Fits Ford 8.8″
    • Includes carrier bearings and races and “super” carrier shim kit
    See More

    National – Multi Purpose Seal (Part No.223012)

    Multi Purpose Seal

    from

    $16.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.F888571)

    Performance Differential Ring and Pinion

    from

    $275.99


    Product Features:
    • FRD 10BLT 8.8 R/P 5.71 MGP
    See More

    Dorman – Differential Clutch Kit (Part No.697-780)

    Differential Clutch Kit

    from

    $262.99
    This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

    Product Features:
    • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
    • Quality materials – all components are built for reliable longevity and performance.
    • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
    • Trustworthy quality – backed by team of designers and engineers in the United States
    See More

    Yukon Gear – Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size (Part No.41049)

    Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size

    from

    $209.99
    Yukon yoke for Ford 8.8″ truck or passenger with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Ford 8.8″
    • 30 spline
    • 1330 u-joint size
    • 3.625″ snap ring span
    • 1.062″ cap diameter
    • Outside snap ring design
    • Strap style
    See More

    Powertrax – No-Slip Traction System (Part No.9206902800)

    No-Slip Traction System

    from

    $551.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Motive Gear – Differential Master Bearing Kit – Timken (Part No.R7.5FRMKT)

    Differential Master Bearing Kit - Timken

    from

    $111.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • FORD 7.5″ MASTER BEARING KIT (TIMKEN)
    See More

    Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

    Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement

    from

    $5.99
    Product Features:
    • Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
    • 0.030″ thick
    See More

    Yukon Gear – Grizzly Locker For Ford 9" Differential With 35 Spline Axles, Racing Design, For Load Bolt D/O (Part No.28030)

    Grizzly Locker For Ford 9" Differential With 35 Spline Axles, Racing Design, For Load Bolt D/O

    from

    $1211.99
    The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker uses 8620 internals and a patented design to provide maximum strength and reduce common failures. Assembled in the USA! This unit has been approved for competition in NASCAR National & Touring series. This is a race unit designed for extreme off road use or racing. All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This locker also fits 9.5″ & 10″ dropouts.

    Product Features:
    • Fits Ford 9″ with 35 spline axles and loadbolt housing
    • Patented internal design reduces common locker failures
    • 8620 internals for added strength
    • Assembled in the USA
    • Aggressive design for racing applications only
    See More

    Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

    Driveshaft Flange Bolts

    from

    $20.29
    This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.WAA4663)

    Differential Pinion Shim Kit

    from

    $15.99
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56072)

    The Carrier Bearing Puller

    from

    $883.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    See More

    Pro-King – Differential Bearing Cup (Part No.742G256)

    Differential Bearing Cup

    from

    $8.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Mr. Gasket – Differential Gasket (Part No.142)

    Differential Gasket

    from

    $20.49
    Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit.

    Product Features:
    • .047″ thick cellulose/nitrile composite gasket material
    • Precision die cut
    • Reusable
    See More

    Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

    Taper Bearing Cup

    from

    $6.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    FAG US – TAPERED ROLLER BEARI (Part No.KT17)

    TAPERED ROLLER BEARI

    from

    $15.29
    TAPERED ROLLER BEARI

    Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

    Bearing Race Driver Set, 21 Piece

    from

    $1566.99
    21 Piece bearing race driver set. (Box wt: 140lbs) No return.

    Product Features:
    • Bearing race driver set
    • 21 pieces
    • All steel construction
    See More

    Yukon Gear – Pinion Seal For ’61-’85 9" Ford (Part No.30137)

    Pinion Seal For '61-'85 9" Ford

    from

    $17.99
    Pinion seal for ’61-’85 9″ Ford. 3″ OD.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits 1961-1985 Ford 9″
    • 3.00″ O.D.
    See More

    Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

    Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

    from

    $59.99
    Product Features:
    • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
    • Interlocking design makes installation much easier
    See More

    Upgrade your 1992 Ford Thunderbird with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1992 Ford Thunderbird, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your Thunderbird functioning at its best. At Advance Auto Parts, we offer a wide selection of 208 Drivetrains for the 1992 Ford Thunderbird, designed to meet your needs without breaking the bank. From Universal Joint replacements to Differentials upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1992 Ford Thunderbird at great prices. Our Drivetrains inventory for this model ranges from just $0.99 to $1,566.99, with an average price of $173.82. Our 208 Drivetrains in stock come from 23 trusted brands, so you’re sure to find the right part for your 1992 Ford Thunderbird without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1992 Ford Thunderbird, we stock popular OEM and aftermarket Drivetrains from top names like Royal Purple, Valvoline, Moog, and more. Royal Purple Drivetrains start at just $12.99 and boast an impressive 5 stars average rating from customers. Valvoline and Moog also bring quality to the table, with Drivetrains available starting at $19.99, and at an average 5 stars rating. With 3,592 customer reviews and counting, our 1992 Ford Thunderbird Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1992 Ford Thunderbird is always ready to roll. We’re committed to providing you with everything you need to keep your Thunderbird in top shape, all in one place. Start shopping confidently below for your 1992 Ford Thunderbird!

    Best-Selling Universal Joints for 1992 Ford Thunderbirds

    Enhance the driving experience in your Ford with 19 quality Universal Joint components, starting at $4.49.

    Spicer – Universal Joint (Part No.5-153X)

    Universal Joint

    from

    $28.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Spicer – Universal Joint (Part No.5-213X)

    Universal Joint

    from

    $39.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

    Greaseable Premium Universal Joint

    from

    $25.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)

    Greaseable Premium Universal Joint

    from

    $19.99
    Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
    • STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
    • INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
    • RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    See More

    Driveworks – Universal Joint (Part No.DW-354)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
    • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.280)

    Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Driveworks – Universal Joint (Part No.DW-369)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)

    Greaseable Super Strength Universal Joint

    from

    $36.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Neapco – Universal Joint (Part No.2-4801)

    Universal Joint

    from

    $7.89
    Universal Joint
    See More

    Neapco – Universal Joint (Part No.1-0154)

    Universal Joint

    from

    $6.49
    Universal Joint
    See More

    Neapco – Universal Joint (Part No.2-4800)

    Universal Joint

    from

    $4.59
    Universal Joint
    See More

    Driveworks – Universal Joint (Part No.DW-270)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    Brute Force – Universal Joint (Part No.2-4800BF)

    Universal Joint

    from

    $5.49
    Universal Joint – Brute Force
    See More

    Neapco – Universal Joint (Part No.1-0153)

    Universal Joint

    from

    $4.49
    Universal Joint
    See More

    Spicer – Universal Joint (Part No.5-1330X)

    Universal Joint

    from

    $37.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Yukon Gear – Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size (Part No.41049)

    Yoke For Ford 8.8" Truck Or Passenger With A 1330 U/Joint Size

    from

    $209.99
    Yukon yoke for Ford 8.8″ truck or passenger with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Ford 8.8″
    • 30 spline
    • 1330 u-joint size
    • 3.625″ snap ring span
    • 1.062″ cap diameter
    • Outside snap ring design
    • Strap style
    See More

    Spicer – Universal Joint (Part No.5-1330-1X)

    Universal Joint

    from

    $36.99
    Universal Joint

    Most Popular 1992 Ford Thunderbird Differentials

    Customize your Ford with 161 Differentials products like Differential Oil, Rear Differential Cover Gaskets, and Differential Covers, all priced under $1,566.99.

    Royal Purple – High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT (Part No.01530)

    High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

    from

    $12.99
    High Performance Motor Oil API LICENSED MOTOR OIL Royal Purple High Performance Motor Oil combines premium base oils with proprietary additive technologies to create a high performance synthetic engine oil that optimizes performance and protection. Royal Purple High Performance Motor Oils carry the current API and ILSAC engine oil licenses, as well as the GM dexos1 gasoline engine oil approval. ILSAC GF-6 AND GM DEXOS1 Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.

    Product Features:
    • Better Wear Protection
    • Increased Protection against Low Speed Pre-Ignition
    • Increased Fuel Efficiency
    • Better Protection for Vehicle Exhaust Emissions Equipment
    • Improved Compatibility with Fuels Containing Ethanol
    • Superior Corrosion Protection
    • Made in USA
    See More

    Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    from

    $35.99
    Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

    Product Features:
    • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)

    MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT

    from

    $25.99
    Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

    Product Features:
    • Maximizes horsepower
    • Extends gear and bearing life
    • Reduces operating temperature
    • Lower coefficient of friction
    • Superior corrosion protection
    • Separates rapidly from water
    • For use with open, limited-slip and locking differential
    • Contains limited-slip friction modifier
    • Made in USA
    See More

    Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

    SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

    from

    $69.99
    Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

    Product Features:
    • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
    • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
    • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
    • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
    • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1100)

    Differential Pinion Shim Kit

    from

    $7.49
    High-quality Differential Component Shim

    Product Features:
    • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R7.5FRMK)

    Differential Master Bearing Kit - Koyo

    from

    $112.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • FORD 7.5″ MASTER BEARING KIT
    See More

    Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.8RMK)

    Differential Master Bearing Kit - Koyo

    from

    $126.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • KIT BRG&SL FORD MSTR 8.8
    See More

    Powertrax – Lock Right Locker (Part No.1830-LR)

    Lock Right Locker

    from

    $444.99
    The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.Powertrax® = Extreme Traction Systems!
    See More

    Motive Gear – Differential Ring and Pinion (Part No.F8.8-410A)

    Differential Ring and Pinion

    from

    $179.99


    Product Features:
    • FRD 10BL 8.8 R/P 4.10A MG
    See More

    Felpro – Differential Cover Gasket (Part No.RDS 55460)

    Differential Cover Gasket

    from

    $8.29
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    National – Bearings (Part No.M802048)

    Bearings

    from

    $23.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

    Differential Shaft Lock Bolt

    from

    $5.99
    This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.8RMKT)

    Differential Master Bearing Kit - Timken

    from

    $137.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • MASTER KIT FORD 8.8″
    See More

    Motive Gear – Differential Pinion Nut (Part No.379570S)

    Differential Pinion Nut

    from

    $6.49
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    National – Wheel Bearing and Seal Kit (Part No.RA-311)

    Wheel Bearing and Seal Kit

    from

    $169.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Spindle bearing and seal kit
    • Includes all components required to complete the repair
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1101)

    Differential Carrier Shim Kit

    from

    $8.49
    High-quality Differential Carrier Shim Kit

    Product Features:
    • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
    See More

    National – Shaft Repair Sleeve (Part No.99157)

    Shaft Repair Sleeve

    from

    $37.49
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Driveworks – Oil Seal (Part No.S-3604)

    Oil Seal

    from

    $4.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Motive Gear – Differential Clutch Pack (Part No.F8.8CPK)

    Differential Clutch Pack

    from

    $123.99


    Product Features:
    • CLUTCH PACK KIT 8.8″ FORD 1 KIT PER UNIT
    See More

    Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)

    Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart

    from

    $19.99
    We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

    Product Features:
    • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
    • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
    • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
    • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
    • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)

    Cover Bolt For Ford 7.5", 8.8" & 9.75"

    from

    $6.99
    Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

    Product Features:
    • 35 spline
    • 8 x 3.96″ bolt pattern
    • Cut to length design fits 40″-43.5″ applications
    • Fits Dana Spicer 60, 70 and 80
    See More

    Dorman – Help – Pinion Crush Sleeves (Part No.81056)

    Pinion Crush Sleeves

    from

    $5.99
    This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
    • Required replacement – when servicing the differential
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)

    HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

    from

    $12.99
    Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

    Product Features:
    • Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
    • Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
    • Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
    • Reduces friction and metal-to-metal contact for peak engine performance
    • Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
    • High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

    Tapered Roller Bearing

    from

    $16.99
    Product Features:
    • Brand may vary by location
    See More

    Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

    Taper Bearing Cup

    from

    $7.29
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Crush Sleeve (Part No.33085)

    Crush Sleeve

    from

    $9.99
    Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

    Product Features:
    • Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
    • 0.480″ tall
    See More

    Yukon Gear – Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33299)

    Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

    from

    $11.99
    Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.

    Product Features:
    • Pinion gear thrust washer for Ford 8.8″
    • 0.875″ diameter cross pin shaft applications only
    See More

    Yukon Gear – Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc (Part No.33053)

    Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc

    from

    $5.99
    Ford 7.5″ & 8.8″ ring gear bolt, standard Open & TracLoc. 7/16″ x 20.

    Product Features:
    • Ring gear bolt for Ford 7.5″ and 8.8″
    • 7/16″ x 20
    See More

    Yukon Gear – Pinion Nut (Part No.33154)

    Pinion Nut

    from

    $7.99
    Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

    Product Features:
    • Pinion nut for Ford 7.5″, 8″ and 9″
    • 3/4″ x 20 thread
    • 1 1/6″ socket
    See More

    Motive Gear – Ring Gear Bolt (Part No.D5AZ4216A)

    Ring Gear Bolt

    from

    $1.99


    Product Features:
    • Ford 7.5″, 8.8″ Ring Gear Bolt
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

    Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

    from

    $27.99
    8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

    Product Features:
    • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
    See More

    Mr. Gasket – Differential Gasket (Part No.142)

    Differential Gasket

    from

    $20.49
    Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit.

    Product Features:
    • .047″ thick cellulose/nitrile composite gasket material
    • Precision die cut
    • Reusable
    See More

    Yukon Gear – Steel Cover For Ford 8.8" (Part No.32328)

    Steel Cover For Ford 8.8"

    from

    $99.99
    Yukon outer stub axle for Chrysler 9.25″ front. This axle uses a 1485 u/joint and has 33 splines.

    Product Features:
    • Fits Ford 8.8″
    • Steel
    See More

    Yukon Gear – DiffrlCover (Part No.32364)

    DiffrlCover

    from

    $99.99
    DiffrlCover

    Motive Gear – Differential Crush Sleeve (Part No.B7A4662A)

    Differential Crush Sleeve

    from

    $3.29
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Motive Gear – Differential Ring and Pinion (Part No.F8.8-410)

    Differential Ring and Pinion

    from

    $228.99


    Product Features:
    • FRD 10BL 8.8 R/P 4.10 MG
    See More

    Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

    Carrier Installation Kit For Ford 8.8" Differential

    from

    $134.99
    Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

    Product Features:
    • Fits Ford 8.8″
    • Includes carrier bearings and races and “super” carrier shim kit
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    Motive Gear – Differential Gear Install Kit (Part No.F8.8IK)

    Differential Gear Install Kit

    from

    $35.99


    Product Features:
    • MINI INSTALL KIT FORD 8.8
    See More

    Dorman – Ring And Pinion Bearing Installation Kit (Part No.697-101)

    Ring And Pinion Bearing Installation Kit

    from

    $164.99
    This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.

    Product Features:
    • Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications.
    • Related repair – smart to have on hand when installing a differential ring and pinion.
    • Durable construction – built for reliable longevity, free of defects in materials and workmanship
    • Trustworthy quality – backed by team of designers and engineers in the United States
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Yukon Gear – Crush Sleeve Eliminator Kit For Ford 8.8" & 7.5" (Part No.55040)

    Crush Sleeve Eliminator Kit For Ford 8.8" & 7.5"

    from

    $96.99
    2 piece solid spacer for Ford 8.8 and 7.5.

    Product Features:
    • Crush sleeve eliminator kit for Ford 7.5″ and 8.8″
    See More

    Energy Suspension – Differential Carrier Bushing Set (Part No.4.1126G)

    Differential Carrier Bushing Set

    from

    $40.99
    Product Features:
    • Made of Superior Hyper-Flex+ Material
    See More

    Motive Gear – Differential Carrier Gear Kit (Part No.F7.5BI)

    Differential Carrier Gear Kit

    from

    $159.99


    Product Features:
    • INTERNALS FORD 7.5
    See More

    Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

    Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

    from

    $59.99
    Product Features:
    • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
    • Interlocking design makes installation much easier
    See More

    Yukon Gear – Pinion Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33297)

    Pinion Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford

    from

    $8.99
    Pinion gear thrust washer (0.750″ shaft) for 8.8″ Ford.

    Product Features:
    • Pinion gear thrust washer
    • Fits Ford 8.8″
    • 0.750″ I.D.
    See More

    Top Picks for 1992 Ford Thunderbird Transfer Cases

    Upgrade Ford Thunderbirds with top-quality Transfer Cases parts, including 4 OEM and aftermarket selections for your 1992 model.

    National – Bearings (Part No.M88048)

    Bearings

    from

    $15.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.M88010)

    Bearings

    from

    $10.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Shaft Repair Sleeve (Part No.99199)

    Shaft Repair Sleeve

    from

    $37.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    FAG US – CUP (Part No.M88010)

    CUP

    from

    $11.29
    CUP

    In-Demand Drive Shafts and Axles for 1992 Ford Thunderbirds

    Select from 18 premium Drive Shafts and Axles parts for your 1992 Ford Thunderbird, with prices ranging from $1.99 to $883.99.

    Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

    Driveshaft Flange Bolts

    from

    $20.29
    This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Spicer – Universal Joint (Part No.5-1310X)

    Universal Joint

    from

    $35.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Driveworks – Oil Seal (Part No.S-100357)

    Oil Seal

    from

    $9.49
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Multi Purpose Seal (Part No.100537)

    Multi Purpose Seal

    from

    $15.29
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Design type: springless; single-lip
    • Temperature range: -100°F to 450°F; -73°C to 232°C
    • Resistant to hydrocarbon/oxygenate blends and provides superior performance
    • Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Bearings (Part No.FC-66998)

    Bearings

    from

    $10.79
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Available in both caged design and full complement
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Multi Purpose Seal (Part No.714569)

    Multi Purpose Seal

    from

    $14.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.223012)

    Multi Purpose Seal

    from

    $16.49
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Carquest Premium – CV Axle Shaft Assembly (Part No.NCV11998)

    CV Axle Shaft Assembly

    from

    $137.99
    N

    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • 100% new axle and components
    • New axle nut or attaching hardware included when applicable
    • Bearings, races and housings are heat-treated for longer life
    • Precision-engineered seal mating surfaces for leak-free performance
    • High moly CV joint grease with stainless-steel boot bands
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56072)

    The Carrier Bearing Puller

    from

    $883.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    See More

    Yukon Gear – Flange Yoke For 8.8" Ford Passenger And 8.8" Ford IFS Truck (4.3" Od) (Part No.41048)

    Flange Yoke For 8.8" Ford Passenger And 8.8" Ford IFS Truck (4.3" Od)

    from

    $286.99
    Yukon flange yoke for 8.8″ Ford passenger and 8.8″ Ford IFS truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Ford 8.8″
    • 30 spline
    • Round companion flange
    • 4.3″ O.D.
    See More

    Carquest Premium – CV Axle Shaft Assembly (Part No.NCV11995)

    CV Axle Shaft Assembly

    from

    $179.99
    Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

    Product Features:
    • Designed to meet or exceed OE specifications for fit, form and function
    • 100% new axle and components
    • New axle nut or attaching hardware included when applicable
    • Bearings, races and housings are heat-treated for longer life
    • Precision-engineered seal mating surfaces for leak-free performance
    • High moly CV joint grease with stainless-steel boot bands
    See More

    Yukon Gear – Stub Axle Bearing For Ford 7.5" IRS, 8.8" IRS & 8.8" IFS (Part No.18055)

    Stub Axle Bearing For Ford 7.5" IRS, 8.8" IRS & 8.8" IFS

    from

    $53.99
    Product Features:
    • Stub axle bearing
    • Fits Ford 7.5″ IRS, 8.8″ IRS and 8.8″ IFS
    See More

    Yukon Gear – 7.5" & 8.8" Pasenger Car Only IRS Stub Axle Side Seal (Part No.30255)

    7.5" & 8.8" Pasenger Car Only IRS Stub Axle Side Seal

    from

    $47.99
    7.5″ & 8.8″ PASENGER CAR ONLY IRS stub axle side seal.Yukon Mighty seal.

    Product Features:
    • Stub axle seal
    • Fits Ford 7.5″ IRS and 8.8″ IRS in passenger car
    See More

    Spicer – SPICER U-JOINT (Part No.5-1310-1X)

    SPICER U-JOINT

    from

    $44.99
    SPICER U-JOINT

    FAG US – BEARING (Part No.BR1682)

    BEARING

    from

    $12.49
    BEARING

    Driveworks – Axle Shaft Seal (Part No.S-714569)

    Axle Shaft Seal

    from

    $11.99
    Product Features:
    • Brand may vary by location
    See More

    Driveworks – Clutch Release Bearing (Part No.S-FC-66998)

    Clutch Release Bearing

    from

    $6.49
    Product Features:
    • Brand may vary by location
    See More

    Pro-King – Axle Seal (Part No.721A074)

    Axle Seal

    from

    $1.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Most Sold 1992 Ford Thunderbird CV Axles and Joints

    Explore our best-selling Ford parts for the 1992 Thunderbird among 3 OEM and aftermarket options starting from $23.99.

    Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

    Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

    from

    $29.49
    This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Help – Universal C.V. Joint Boot Kit Front Outer (Part No.03680)

    Universal C.V. Joint Boot Kit Front Outer

    from

    $23.99
    Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.

    Product Features:
    • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Split CV Boot – With Quick Drying Adhesive (Part No.614-700)

    Split CV Boot - With Quick Drying Adhesive

    from

    $42.99
    This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

    Product Features:
    • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
    • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
    • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Top-Rated Drivetrains Brands For Your 1992 Ford Thunderbird

    Shop for the best-rated brands offering Drivetrains and other products for your 1992 Ford Thunderbirds. Below you’ll find some of our best rated Drivetrains from Royal Purple, Valvoline, and Moog, and more. Drivetrains from these brands that fit a 1992 Thunderbird start at just $12.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Royal Purple 1992 Ford Thunderbird Drivetrains

    When it comes to maintaining or upgrading your 1992 Ford Thunderbird, using quality Drivetrains is essential to ensure durability and a perfect fit. Royal Purple ticks all of those boxes. We offer a wide selection of Royal Purple Drivetrains, specifically designed for the 1992 Ford Thunderbird. With over 3 Royal Purple brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $17.32. Plus, with over 139 customer reviews and an average rating of 5 stars, you can trust that our Royal Purple Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)
    from
    $12.99
    This product is not rated

    HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)

    “”

    Popular Valvoline 1992 Ford Thunderbird Drivetrains

    Valvoline auto parts is one of the highest quality Drivetrain brands in the market. Any 1992 Ford Thunderbird owner should feel confident when installing genuine Valvoline parts in their vehicle. To ensure the best fit and performance for your 1992 Thunderbird, Advance Auto Parts carries a full inventory of 3 Valvoline Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Valvoline Drivetrains range from $19.99 to $69.99, plus, with more than 381 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon
    from
    $69.99

    (364)

    SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

    “Worked well. Smells like sulfur if you get on your clothes.”

    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from
    $35.99

    (17)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    “Equivalent to oem”

    FAQs for 1992 Ford Thunderbird Drivetrains

    Which Drivetrains are best-sellers for 1992 Ford Thunderbirds?

    Out of 208 Drivetrains that fit 1992 Ford Thunderbirds, the following parts are the top sellers:

    What’s the price range for 1992 Ford Thunderbird Drivetrains?

    Drivetrain prices for the 1992 Ford Thunderbird start at $0.99 and go up to $1,566.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1992 Ford Thunderbird?

    The average price for Drivetrains for the 1992 Ford Thunderbird is $173.82. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Ford Thunderbird model years?

    Yes, we currently carry Drivetrains for 46 model years of Ford Thunderbirds between 1955 and 2005. Drivetrains are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 1997, 1996, 1995, 1994, and 1993.

    What are the cheapest Drivetrains for my 1992 Ford Thunderbird?

    The cheapest 1992 Ford Thunderbird Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1992 Ford Thunderbird?

    Out of 3,592 reviews by customers, our 1992 Ford Thunderbird Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1992 Ford Thunderbird and their top-rated products:

    What types of Drivetrains do you sell for my 1992 Ford Thunderbird?

    As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1992 Ford Thunderbird:

    Can I get help with 1992 Ford Thunderbird Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.

    What is your return policy for Ford Thunderbird Drivetrains?

    Advance Auto Parts keeps returns simple. For new Ford Thunderbird Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.