1991 Jeep Comanche Drivetrains

Essential 1991 Jeep Comanche Drivetrains

Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)

Rubber Fill Plug For Chrysler

from

$22.99
Product Features:
  • Rubber fill plug
  • Fits Chrysler 7.25″, 8.25″ and 9.25″
See More

MOOG Driveline Products – Double Cardan CV H Yoke (Part No.647)

Double Cardan CV H Yoke

from

$71.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Machined bodies to meet the tight tolerances
  • Forged and cast material to meet the performance requirement
  • Minimize the flash lines for less interference
  • Cleaning process induces compressive strength for increased performance
  • Machined and threaded holes for mounting ease
  • Rust preventative added for longer shelf life
See More

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles (Part No.16073)

Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles

from

$155.99
Yukon replacement standard open spider gear kit for Dana 30 with 27 spline axles and with or without quick disconnect. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 30 open differential with 27 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Motive Gear – Differential Pinion Seal (Part No.5778)

Differential Pinion Seal

from

$9.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

from

$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Replacement Cover Gasket For Dana 30

from

$12.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 30
See More

Yukon Gear – Standard Open Carrier Case & Spiders, Amc Model 35, 3.54 & Up (Part No.20062)

Standard Open Carrier Case & Spiders, Amc Model 35, 3.54 & Up

from

$549.99
Model 35 standard Open carrier loaded, 3.54 & up + 3.27, 1-5/8″ tall, complete, w/ bearings.

Product Features:
  • Standard open carrier case and spiders
  • Fits AMC Model 35
  • 3.54 and up ratio only
  • Includes ring gear bolts, carrier bearings and races, and roll pin
See More

Omix – Differential Carrier (Part No.16505.23)

Differential Carrier

from

$626.99
Changing to new ring and pinion gear ratio? You may need a new differential carrier depending on the gear ratio break. Or maybe your diff blew up? Either way, Omix-ADA has you covered. We have dozens of differential carriers to meet your needs.

Product Features:
  • Includes Bolts; Bearings; And Shims
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Dorman – Spindle Washer – I.D. 24.7mm O.D. 45.1mm Thickness 4.7mm (sold by each) (Part No.618-027)

Spindle Washer - I.D. 24.7mm O.D. 45.1mm Thickness 4.7mm (sold by each)

from

$2.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-166)

Rear Drive Shaft: Greaseable, Adjustable

from

$773.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Driveworks – Spindle Bearing/Oil Seal Kit (Part No.S-SBK-1)

Spindle Bearing/Oil Seal Kit

from

$11.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Crown Auto Jeep Replacmnt – For Use With 241 Transfer Case (Part No.4638913)

For Use With 241 Transfer Case

from

$41.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV82504)

CV Axle Shaft Assembly

from

$94.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)

8.25" Chrysler Cover Gasket

from

$12.99
8.25″ Chrysler cover gasket.

Product Features:
  • Cover gasket
  • Fits Chrysler 8.25″
See More

Yukon Gear – Zip Locker Install Kit (Part No.34026)

Zip Locker Install Kit

from

$249.99
Product Features:
  • Installation kit
  • Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1127)

Differential Pinion Shim Kit

from

$21.29


Product Features:
  • PINION SHIMS – AMC MODEL 20
See More

Needa Parts – Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head, 1 Pack (Part No.090-018)

Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head, 1 Pack

from

$11.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Dana 28 & Dana 30 Pinion Gear Thrust Washer (Part No.33285)

Dana 28 & Dana 30 Pinion Gear Thrust Washer

from

$7.99
Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560″ side gear bore only.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 25, 27 and 30
See More

Yukon Gear – Model 35 Standard Open Side Gear Thrust Washer (Part No.33292)

Model 35 Standard Open Side Gear Thrust Washer

from

$9.99
Model 35 standard Open side gear Thrust washer. Fits 1.625″ side gear bore only.

Product Features:
  • Side gear thrust washer
  • Fits AMC Model 35
See More

National – Bearings (Part No.B-228)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Intermediate Shaft Bushing For Disconnect Dana 30 & 44 (Part No.18060)

Intermediate Shaft Bushing For Disconnect Dana 30 & 44

from

$21.99
Product Features:
  • Intermediate shaft bushing
  • Fits Dana Spicer 30 and 44 with disconnect axles
See More

National – Bearings (Part No.02820)

Bearings

from

$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Spindle Bearing For Dana 44 (Part No.33493)

Spindle Bearing For Dana 44

from

$23.99
Spindle bearing for Dana 44. This replaces Spicer part number 550759.

Product Features:
  • Spindle bearing
  • Fits Dana Spicer 44
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 55019)

Axle Housing Cover Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Popular 1991 Jeep Comanche Drivetrains Categories

1991 Jeep Comanche Drivetrains

You count on your 1991 Jeep Comanche to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 604 Drivetrains ranging in price from $1.49 to $1,394.99, you’re sure to find everything you need for your 1991 Jeep Comanche.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 24 different brands like Valvoline, Moog, and Driveworks. 1991 Jeep Comanche Drivetrains start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 6,525 extensive product reviews on 1991 Jeep Comanche Drivetrains. Some of the top-rated Drivetrains products we carry are Differential Ring and Pinion Set with 3.8 stars and Oil Seal with 4.8 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1991 Jeep Comanche below to get started!

Top-Rated Drivetrains Brands For Your 1991 Jeep Comanche

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1991 Jeep Comanche running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Crown Auto Jeep Replacmnt Drivetrains

You’ll find popular Crown Auto Jeep Replacmnt brand products across Differentials. All are waiting to get your 1991 Jeep Comanche back on the road. Some of the top-rated Crown Auto Jeep Replacmnt products in these categories are:

FAQs for 1991 Jeep Comanche Drivetrains

What are the most purchased Drivetrains for the 1991 Jeep Comanche?

Out of 604 Drivetrains for the 1991 Jeep Comanche, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $19.99
(82)
Greaseable Premium Universal Joint
U-Joints
Taper Bearing Set
from $10.29
(38)
Taper Bearing Set
Differential Bearings
Universal Joint
from $15.99
(33)
Universal Joint
U-Joints

What are the top-rated 1991 Jeep Comanche Drivetrains?

Top-rated Drivetrains for your 1991 Jeep Comanche based on customer reviews/ratings are:
Differential Ring and Pinion Set
from $283.99
(255)
Differential Ring and Pinion Set
“Perfect combo and a perfect color match too.”
Oil Seal
from $5.49
(38)
Oil Seal
“Exact fit , price was good”
Greaseable Super Strength Universal Joint
from $32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”