1986 Chevrolet G10 Cooling and Climate Controls

Essential 1986 Chevrolet G10 Cooling and Climate Controls

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

ARP Auto Racing – ARP Water Pump Bolt Kit (Part No.134-3203)

ARP Water Pump Bolt Kit

from

$18.99
ARP water pump bolt kits are available in either a polished stainless steel or black oxide chromoly finish. They come in your choice of standard hex bolts or compact 12-point fasteners. Secure your water pump in high performance style.

Product Features:
  • 7/16″ 12-Point Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Chevy Small Block
  • Short Water Pump
See More

Carquest Premium – A/C Clutch Cycle Switch (Part No.ACA1542)

A/C Clutch Cycle Switch

from

$15.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Valve Core/Cap Kit (Part No.FTT010103)

Valve Core/Cap Kit

from

$12.99
New Standard Replacement A/C System Valve Core And Cap Kit

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10236)

Engine Coolant Reservoir Cap

from

$9.49
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020206740ACD)

GM Original Equipment Engine Coolant Temperature Sensor

from

$53.39
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54408)

A/C Plate and Fin Evaporator

from

$124.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – A/C Condenser (Part No.2315)

A/C Condenser

from

$245.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Carquest Premium – HVAC Blower Switch Connector (Part No.PTA1315)

HVAC Blower Switch Connector

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – Sealing Washer Kit (Part No.24338)

Sealing Washer Kit

from

$5.29
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1159)

HVAC Blower Motor Resistor

from

$19.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Dorman – Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-101)

Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement

from

$26.49
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

GM Genuine Parts – Air Conditioning Orifice Tube (Part No.15-5151)

Air Conditioning Orifice Tube

from

$11.99
GM Genuine Parts A/C Orifice Tubes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These tubes, which separate the high and low pressure sides of the air conditioning system, control the flow of low pressure liquid refrigerant into the evaporator. The orifice tube is essentially a calibrated restriction located at the inlet to the evaporator. This causes the necessary pressure drop to allow the liquid refrigerant to evaporate within the evaporator and absorb heat. Since the orifice tube is fixed, the system is regulated by either cycling the compressor clutch or by a variable displacement compressor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Restores A/C performance due to restricted orifice tubes
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

National – Bearings (Part No.907257)

Bearings

from

$48.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.114)

Trimline Straight Blade Electric Fan

from

$125.99
Trimline Straight Blade Electric Fan

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84989)

Coolant Housing/Water Outlet: Gasket Included

from

$31.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest – A/C Auto Temperature Control Relay (Part No.R3093)

A/C Auto Temperature Control Relay

from

$18.05
Product Features:
  • Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
  • A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
  • Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
  • The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.
See More

Flex A Lite – Belt-Driven Fan Spacer (Part No.516)

Belt-Driven Fan Spacer

from

$18.99
Belt-Driven Fan Spacer

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35601)

Standard Rotation Blower Motor Wheel

from

$18.29
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Galvanized steel construction
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Set screw installation
See More

Factory Air – Green Round O-Ring (Part No.24615)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Factory Air – Compressor Mounted Low Cut-Out Pressure Switch (Part No.35973)

Compressor Mounted Low Cut-Out Pressure Switch

from

$31.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Improved 2 terminal design replacing older 1 terminal switch
See More

Carquest Premium – Blower Motor: Without Wheel (Part No.35500)

Blower Motor: Without Wheel

from

$45.49
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Carquest Premium – New Compressor with Clutch, GM R4 Lightweight (Part No.T58240)

New Compressor with Clutch, GM R4 Lightweight

from

$307.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All compressors go through sophisticated testing and leak test processes
  • Includes specific electrical connector to eliminate splicing
  • For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
See More

Mr. Gasket – Water Outlet Gasket (Part No.740)

Water Outlet Gasket

from

$5.99
Manufactured from a blend of nitrile rubber and fiber for excellent sealing and durability. Precision die cut for application.

Product Features:
  • This gasket is bulk packaged
  • Made from Cellulose/Nitrile Composition
  • Provides Excellent Sealing and Durability
  • These Gaskets are Die Cut for a Precision Fit
  • Fits Small Block Chevy V8 Engines 1955-’90
  • Fits Big Block Chevy V8 Engines 1965-’90
  • Fits Small Block Chrysler 318/360 1979-’92
  • Fits Small Block Chysler 3.9L/5.2L/5.9L Magnum 1992-’03
See More

1986 Chevrolet G10 Cooling and Climate Controls

You count on your 1986 Chevrolet G10 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 174 Cooling and Climate Controls ranging in price from $1.49 to $569.99, you’re sure to find everything you need for your 1986 Chevrolet G10.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 26 different brands like Carquest Premium, Permatex, and Felpro. 1986 Chevrolet G10 Cooling and Climate Controls start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 16,919 extensive product reviews on 1986 Chevrolet G10 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Engine Coolant Outlet Gasket with 4.8 stars and A/C White Orifice Tube with 4.7 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1986 Chevrolet G10 below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 1986 Chevrolet G10

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Chevrolet G10 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Permatex, Felpro, and even more.

Popular Delphi Cooling and Climate Controls

You’ll find popular Delphi brand products across Engine Cooling Parts. All are waiting to get your 1986 Chevrolet G10 back on the road. Some of the top-rated Delphi products in these categories are:
Engine Coolant Temperature Sensor
from $29.99
(1)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

Top-Rated Carquest Premium Cooling and Climate Controls


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1986 Chevrolet G10, and some of our most reviewed Carquest Premium parts include:
Radiator Cap: 16 PSI
from $9.79
(260)
Radiator Cap: 16 PSI
Radiator Caps
Blower Motor: With Wheel
from $34.99
(116)
Blower Motor: With Wheel
Blower Motors
Standard Thermostat: 195 Degrees
from $9.99
(107)
Standard Thermostat: 195 Degrees
Thermostats

FAQs for 1986 Chevrolet G10 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 1986 Chevrolet G10?

Out of 174 Cooling and Climate Controls for the 1986 Chevrolet G10, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Engine Water Pump Gasket
from $2.99
(68)
Engine Water Pump Gasket
Water Pump Gaskets

What are the top-rated 1986 Chevrolet G10 Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 1986 Chevrolet G10 based on customer reviews/ratings are:
Engine Coolant Outlet Gasket
from $3.99
(100)
Engine Coolant Outlet Gasket
“Perfect fit”
A/C White Orifice Tube
from $2.99
(97)
A/C White Orifice Tube
“Good”
Severe Temp Automatic Adjusting Orifice Tube
from $15.99
(97)
Severe Temp Automatic Adjusting Orifice Tube
“Perfect fit in my f150. Works great.”