1985 Toyota Tercel Drivetrains

Essential 1985 Toyota Tercel Drivetrains

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69006)

CV Axle Shaft Assembly

from

$132.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8468)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$97.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to TOYOTA 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1981-1988
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 0.50 INCH / 13 MM
  • MOUNT WIDTH: 6.00 INCH / 152 MM
  • STYLE: ROUND FRAME
  • WITH WINGS
See More

Valvoline – ATF for Mercon®V Applications Conventional, 1 Quart (Part No.822345)

ATF for Mercon®V Applications Conventional, 1 Quart

from

$12.99
Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99147)

Shaft Repair Sleeve

from

$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Rear Axle Differential Vent (Part No.924-262)

Rear Axle Differential Vent

from

$11.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.101-SS)

Bearings

from

$19.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.201-CC)

Bearings

from

$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Taper Bearing Cone (Part No.S-M-86649)

Taper Bearing Cone

from

$8.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.M86649)

Bearings

from

$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Standard Spindle Nut M19-1.5 Hex Size 30mm (Part No.615-109.1)

Standard Spindle Nut M19-1.5 Hex Size 30mm

from

$9.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut M16-1.5 Hex Size 22mm (sold by each) (Part No.615-092)

Spindle Nut M16-1.5 Hex Size 22mm (sold by each)

from

$3.49
Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:
  • Direct replacement for a proper fit every time
  • High quality steel construction
  • Conveniently available in many styles and in packs of different quantities
  • Dorman’s Spindle Nuts are constructed to strict engineering quality standards
See More

Beck/Arnley – Axle Nuts (Part No.103-0533)

Axle Nuts

from

$4.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Made with premium grade materials
  • Quality construction for durability
  • Designed for under vehicle environment
  • Application specific for this vehicle
See More

MOOG Driveline Products – CV Joint Boot Kit (Part No.6460)

CV Joint Boot Kit

from

$15.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Replaces the OEM fitment
  • Straps designed to prevent contaminants from entering boot cavity
  • Straps have superior strength
  • Boot material designed for strength
  • Convoluted boots allow for increase articulation
  • Ease of installation
See More

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

from

$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – C.V. Joint Solvent Welded Split Boot Kit Outer (Part No.614-531)

C.V. Joint Solvent Welded Split Boot Kit Outer

from

$28.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.

Product Features:
  • Save labor with easy installation methods
  • Comes with grease and clamps
  • Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
  • The Speedi and Quick Boot are installed without special tools
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-107)

Rear Drive Shaft: Adjustable

from

$823.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Spindle Nut M20-1.5 Hex Size 30mm (sold by each) (Part No.615-102)

Spindle Nut M20-1.5 Hex Size 30mm (sold by each)

from

$2.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Spindle Nut M16-1.5 Hex Size 22mm (sold by each) (Part No.615-093)

Spindle Nut M16-1.5 Hex Size 22mm (sold by each)

from

$2.49
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

1985 Toyota Tercel Drivetrains

You count on your 1985 Toyota Tercel to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 24 Drivetrains ranging in price from $2.29 to $823.99, you’re sure to find everything you need for your 1985 Toyota Tercel.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 7 different brands like Valvoline, National, and Dorman. 1985 Toyota Tercel Drivetrains start as low as $2.29!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,619 extensive product reviews on 1985 Toyota Tercel Drivetrains. Some of the top-rated Drivetrains products we carry are Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter with 3.2 stars and Shaft Repair Sleeve with 4.0 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1985 Toyota Tercel below to get started!

Top-Rated Drivetrains Brands For Your 1985 Toyota Tercel

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Toyota Tercel running right for years to come. In our inventory you’ll find brands like Valvoline, National, Dorman, and even more.

Popular Valvoline Drivetrains

You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1985 Toyota Tercel back on the road. Some of the top-rated Valvoline products in these categories are:

FAQs for 1985 Toyota Tercel Drivetrains

What are the most purchased Drivetrains for the 1985 Toyota Tercel?

Out of 24 Drivetrains for the 1985 Toyota Tercel, the most popular in our inventory are:
Bearings
from $16.99
(39)
Bearings
Axle Shaft Bearings
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
from $29.49
(36)
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
CV Quick Boot Kits
Bearings
from $18.79
(3)
Bearings
Front Differential Pinion Bearings

What are the top-rated 1985 Toyota Tercel Drivetrains?

Top-rated Drivetrains for your 1985 Toyota Tercel based on customer reviews/ratings are:
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter
from $35.99
(11)
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter
“The only thing I could find to fit an aftermarket axle that was on the car. If your e46 330XI has a front axle with a round inner carrier instead if t”
Shaft Repair Sleeve
from $41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
Bearings
from $15.79
(2)
Bearings
“Good OE replacement, hopefully it lasts as long as the OEM part”