1985 GMC S15 Jimmy Steering and Chassis Parts
More 1985 GMC S15 Jimmy Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1985 GMC S15 Jimmy, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1985 GMC S15 Jimmy Steering and Chassis Parts
Lares – Remanufactured Manual Steering Gear Box (Part No.1275)
from
$269.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Powercraft – Pump Seal Kit (Part No.7918)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Sway Bar Bushing (Part No.RP15890)
from
$53.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Driveworks – Oil Seal (Part No.S-3553)
from
$7.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MOOG – Torsion Bar Load Kit (Part No.T40016)
from
$181.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- High quality construction
- Saves time on installation
- For both professionals and DIYers
- Designed for use on cars and light trucks
- Incorporates proven design and engineering features
Powercraft – Steering Gear Complete Rebuild Kit (Part No.8780)
from
$116.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Monroe – Magnum Steering Damper (Part No.SC2937)
from
$47.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.
Product Features:
See More
Product Features:
- 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
- All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
- Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
- Micro-Cellular Gas Design Allows unit to be mounted horizontally.
- Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
- Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Driveworks – SWAY BAR LINK KIT 1 EA DRIVE (Part No.DW-K5254)
from
$18.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
National – Multi Purpose Seal (Part No.7013S)
from
$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
MOOG – Tie Rod End (Part No.ES2034RLT)
from
$43.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Driveworks – Tie Rod End (Part No.DW-ES2034RLT)
from
$28.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
MOOG – Center Link (Part No.DS1047)
from
$129.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Powdered metal gusher bearing design enables grease to flow through bearing
- Engineered steel composition results in a stronger component
- Full ball metal stud provides 360 Degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Loose or worn chassis parts can lead to premature tire wear
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Caster/Camber Shim (Part No.K100191)
from
$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Carquest Premium – Ball Joint (Part No.410-65006)
from
$59.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Knurling improves retention between the control arm/knuckle and ball joint housing
Dorman – Help – Power Steering Caps (Part No.82581)
from
$5.99
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
Product Features:
See More
Product Features:
- Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap
- Durable construction – made of quality materials for leak-free performance and a long service life
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.9234)
from
$18.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Carquest Premium – Pressure Hose Assembly (Part No.35596)
from
$60.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)
from
$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Hardware included for easier installation (where applicable)
Rare Parts – Tie Rod Sleeve (Part No.RP25522)
from
$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
National – Bearings (Part No.DB-53313)
from
$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Powercraft – Pump Complete Rebuild Kit (Part No.8561)
from
$67.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Dorman – Left Steering Knuckle (Part No.697-904)
from
$951.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Stabilizer Bar Bushing Kit (Part No.K6455)
from
$29.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
TRW – TRW Idler Arm (Part No.M3020211433TRW)
from
$61.86
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Idler Arm is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
- Acoustic measurements to ensure driver comfort
- Strength tests for durability
- Environmental resistance tests for all weather conditions
- Wear and drive tests
- Assembly technique testing of all critical safety features
- Dynamic testing of complete units to ensure leak free performance
- Extensive on-road testing at TRW tracks around the world
Carquest Premium – Bulk – 5/8" I.D. Reservoir Hose (Part No.36220)
from
$46.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
MOOG – Pitman Arm (Part No.K6255)
from
$90.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Heavy duty design
- Engineered steel composition results in a stronger component
- Loose or worn chassis parts can lead to premature tire wear
- Exclusive cover plate protects against contaminants leaking into the bearing surface
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Popular 1985 GMC S15 Jimmy Steering and Chassis Parts Categories
1985 GMC S15 Jimmy Steering and Chassis Parts
You count on your 1985 GMC S15 Jimmy to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 199 Steering and Chassis Parts ranging in price from $2.99 to $951.99, you’re sure to find everything you need for your 1985 GMC S15 Jimmy.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 21 different brands like Driveworks, Moog, and Imperial. 1985 GMC S15 Jimmy Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,162 extensive product reviews on 1985 GMC S15 Jimmy Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Oil Cooler with 3.7 stars and Power Steering Filter with 3.8 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1985 GMC S15 Jimmy below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1985 GMC S15 Jimmy
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 GMC S15 Jimmy running right for years to come. In our inventory you’ll find brands like Driveworks, Moog, Imperial, and even more.
Popular CTR Steering and Chassis Parts
You’ll find popular CTR brand products across Ball Joints. All are waiting to get your 1985 GMC S15 Jimmy back on the road. Some of the top-rated CTR products in these categories are:
Top-Rated Driveworks Steering and Chassis Parts
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Steering and Chassis Parts for your 1985 GMC S15 Jimmy, and some of our most reviewed Driveworks parts include:
FAQs for 1985 GMC S15 Jimmy Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1985 GMC S15 Jimmy?
Out of 199 Steering and Chassis Parts for the 1985 GMC S15 Jimmy, the most popular in our inventory are:
What are the top-rated 1985 GMC S15 Jimmy Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1985 GMC S15 Jimmy based on customer reviews/ratings are:
from
$31.99
(31)
BALL JOINT 1 EA DRIVE
“Warranty, Price in local stores , good deal ! Haven’t had any issues with suspension components from Advance Auto Parts.”
