Choose a Store
- Shop All
- Replacement Parts
- Performance Parts
- Accessories
- Oil & Fluids
- Special Offers
- Advance Rewards
- Advice & How-Tos
- Project Guides
Share
Loading...
How Would You Like To Get This Item?
Store Pickup
Same Day Home Delivery
Home Delivery
Product Information
Product Details
Part No. K5208
Warranty Details (Limited Lifetime Warranty)
Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
Product Features:
- DESIGN CHANGE - New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER GUSHER BEARING - Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE - Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET - Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT - Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING - Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL - Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE - Available for foreign and domestic nameplates
Specifications
Adjustable:
No
Castle Nut Included:
Yes
Cotter Pin Hole:
Yes
Grade Type:
Premium
Greaseable:
Yes
Material:
Neoprene
Mounting Hardware Included:
Yes
Mounting Hole Quantity:
4
Mounting Type:
Bolt-On
Suspension Grade Type:
Standard Replacement
4.76 out of 5
25 Customer Reviews
89% of respondents would recommend this to a friend
Ratings Distribution
5 Stars
22
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
1
Pros
2
Easy To Use
2
High-Performance
2
Made in the USA
1
Durable
Cons
1
None
Best Uses
1
Trucks
1
Where applicable
Car/Motorcycle Describe yourself
1
Auto Enthusiast
1
Mechanic
1
Undesired Ft Mechanic
Most Liked Positive Review
QUALITY PART, WORTH THE MONEY
THE QUALITY OF THESE BALL JOINTS IS OBVIOUS. I DRIVE THIS TRUCK EVERY DAY AT EXPRESSWAY SPEEDS AND FEEL VERY COMFORTABLE KNOWING THAT THESE PARTS ARE IN THE FRONT END OF MY TRUCK. WHEN COMPARING TO THE CHEAPER LINE OF PARTS THE DECISION TO BUY MOOG WAS A "NO-BRAINER".
Most Liked Negative Review
Not sure if these were worth the extra cost
After reading reviews of the Moog ball joints vs. the Driveworks ball joints for my 1995 S-10, I decided to pay more than twice the $$ and go for the Moog ones. The reviews of the Driveworks ball joints complained of poor quality fasteners. and since I was going to be replacing one of these on the side of the road, I wanted to be able to just install it and drive my truck home.
When I picked up my order, the ball joints came in Driveworks boxes, but with a Moog sticker and part number. I chiseled the rivets from the factory ball joint, installed the new one, and when tightening the 4 upper attachment bolts, they stripped out before they were very tight at all. I was only using a 4 inch long 1/4 inch drive ratchet on a 10mm socket. The large lower nut also stripped out WAY before I reached the recommended 61 ft-lbs torque setting, but I was able to get the cotter pin in the hole so I was able to drive the truck home.
If I had known how cheap these 'better quality' Moog parts were, I would have just gone with the cheaper Driveworks ones.
Reviewed by 25 Customers
Good product
Staff Reviewer -
Fits like expected. Built good.
Bottom Line Yes, I would recommend to a friend
Very High Quality Upper Ball Joint
Staff Reviewer -
OEM exact fit. High quality made in the USA.
Bottom Line Yes, I would recommend to a friend
Not sure if these were worth the extra cost
After reading reviews of the Moog ball joints vs. the Driveworks ball joints for my 1995 S-10, I decided to pay more than twice the $$ and go for the Moog ones. The reviews of the Driveworks ball joints complained of poor quality fasteners. and since I was going to be replacing one of these on the side of the road, I wanted to be able to just install it and drive my truck home.
When I picked up my order, the ball joints came in Driveworks boxes, but with a Moog sticker and part number. I chiseled the rivets from the factory ball joint, installed the new one, and when tightening the 4 upper attachment bolts, they stripped out before they were very tight at all. I was only using a 4 inch long 1/4 inch drive ratchet on a 10mm socket. The large lower nut also stripped out WAY before I reached the recommended 61 ft-lbs torque setting, but I was able to get the cotter pin in the hole so I was able to drive the truck home.
If I had known how cheap these 'better quality' Moog parts were, I would have just gone with the cheaper Driveworks ones.
Bottom Line No, I would not recommend to a friend
QUALITY PART, WORTH THE MONEY
Staff Reviewer -
THE QUALITY OF THESE BALL JOINTS IS OBVIOUS. I DRIVE THIS TRUCK EVERY DAY AT EXPRESSWAY SPEEDS AND FEEL VERY COMFORTABLE KNOWING THAT THESE PARTS ARE IN THE FRONT END OF MY TRUCK. WHEN COMPARING TO THE CHEAPER LINE OF PARTS THE DECISION TO BUY MOOG WAS A "NO-BRAINER".
Bottom Line Yes, I would recommend to a friend
You get what you pay for.
Verified Buyer -
This product has a great warranty and is well made. You get what you pay for and this product will pay for itself in time. Due to the quality of the part, the price is high.
Bottom Line Yes, I would recommend to a friend
Displaying Reviews 1 - 5Back to Top
No results
Feedback
Be The First To Know About Deals And Promotions.
Plus, create an account to receive $5 off of $20 or more.
TOP REPLACEMENT PARTS
ROUTINE MAINTENANCE PARTS
CUSTOMER SUPPORT
ABOUT US
PROFESSIONAL SHOPS