1982 Ford F-250 Pickup Cooling and Climate Controls

Essential 1982 Ford F-250 Pickup Cooling and Climate Controls

Factory Air – New Ford FS6 Clutch Assembly w/ Coil (Part No.47849)

New Ford FS6 Clutch Assembly w/ Coil

from

$162.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

Driveworks Water Pumps – Water Pump (Part No.58-499)

Water Pump

from

$75.99
Manufactured to meet or exceed OEM specifications.

Product Features:
  • 100% leak testing and hub-pull testing ensures reliable performance.
  • O.E.-supplied NEW unitized seals ensure long-lasting, trouble-free performance.
  • The proper O.E. specified bearing design is installed to meet the specific radial and axial load requirements of each application. This ensures longer bearing life and reliable performance.
  • Thermostat seal and mounting gasket are supplied for ease of installation (where applicable).
See More

Felpro – Engine Coolant Outlet Gasket (Part No.35063)

Engine Coolant Outlet Gasket

from

$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

TYC Genera – Blower Motor Assembly (Part No.R2031200670TYC)

Blower Motor Assembly

from

$96.90
Maintaining warm or cool air circulating smoothly through a vehicle’s cabin is the key to passenger comfort. Manufactured to precision standards, a TYC brand Blower delivers the fit and quality you expect from the quality-driven reputation TYC/Genera has built. Your new TYC brand Blower is designed specifically for your vehicle and is ready to be installed quickly and easily under the dash, into the ventilation module. To guarantee the quietest operation, the sound of the operating motor is also tested to ensure comfortable air movement without excessive noise.

Product Features:
  • Manufactured to exact OEM specifications.
  • Direct Fit Replacement.
  • Application-specific motor and wheel,
  • OE-comparable connector
  • Hassle-free installation.
See More

Vemo – Blower Motor Resistor (Part No.R2032300603VMO)

Blower Motor Resistor

from

$32.42
The Vemo Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:
  • Excellent electrical and thermal performance
  • Direct OE replacement
  • Built to strict quality control standards
  • 100% tested
See More

KAI – A/C Accumulator (Part No.ACM010179)

A/C Accumulator

from

$49.99
New Standard Replacement A/C Accumulator, V6 Engine

Product Features:
  • V6 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Motorcraft – Original Equipment (O.E.) Sender Assembly – Temperature (Part No.SW-2328)

Original Equipment (O.E.) Sender Assembly - Temperature

from

$41.99
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:
  • Motorcraft Sender Assembly literally sends engine fuel to the engine under pressure created by the fuel pump.
  • As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into Motorcraft Sender Assemblies, ensuring the most current technology.
  • Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.
  • Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.
See More

Carquest Premium – A/C Blue Orifice Tube (10 pkg) (Part No.T621)

A/C Blue Orifice Tube (10 pkg)

from

$24.99
Carquest Orifice Tubes are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each orifice tube is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each orifice tube is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • Application specific design
  • Color coded
See More

Factory Air – System Mounted Cycling Pressure Switch (Part No.36486)

System Mounted Cycling Pressure Switch

from

$18.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – Heavy Duty Fan Clutch – Thermal 7" Standard Rotation (Part No.215046)

Heavy Duty Fan Clutch - Thermal 7" Standard Rotation

from

$86.99
Product Features:
  • Designed, tested, and built by application
  • OE performance, fit, and appearance
  • Precision machined
  • Out of box installation
See More

Carquest Premium – Reverse Rotation Blower Motor Wheel (Part No.35219)

Reverse Rotation Blower Motor Wheel

from

$35.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Durable Plastic Material
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Retainer clip installation
See More

Carquest Premium – A/C Condenser (Part No.1158)

A/C Condenser

from

$196.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specificat

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1094)

Temperature Sender With Gauge

from

$5.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Flex A Lite – Black Magic Electric Fan (Part No.180)

Black Magic Electric Fan

from

$367.99
Black Magic Electric Fan

Carquest Premium – Deck Lid / Liftgate Ajar Switch Connector (Part No.PTA1488)

Deck Lid / Liftgate Ajar Switch Connector

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34185)

Air Conditioning Bypass Pulley

from

$49.49
This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:
  • Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
  • Durable components – this bypass pulley uses quality components for a long service life
  • Easy to install – uses the same mounting points as the A/C compressor
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Driveworks – Electrical Relay (Part No.83177)

Electrical Relay

from

$24.29
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:
  • Direct-fit OE replacement ensures ease of installation
  • Designed to meet OE performance
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
  • As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
See More

Dorman – Blower Motor Harness (Part No.645-551)

Blower Motor Harness

from

$19.99
This HVAC blower switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC blower switch connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – HVAC Blower Control Switch (Part No.ACC1269)

HVAC Blower Control Switch

from

$40.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Water Pump Stud Kit (Part No.23744)

Water Pump Stud Kit

from

$13.29
This engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine water pump stud kit is designed to match the original hardware required to repair the water pump on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original hardware that is missing or damaged
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Mahle – Water Pump Hsng Gask (Part No.G3031195751MAH)

Water Pump Hsng Gask

from

$5.27
Water Pump Hsng Gask

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Motorad – Thermostat Kit: Includes Housing, Thermostat and Seal, 192 Degrees (Part No.5001KT)

Thermostat Kit: Includes Housing, Thermostat and Seal, 192 Degrees

from

$31.49
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Adjustable Thermostatic Fan Control

from

$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:
  • Adjustable thermostatic fan control
  • 160-210°F push-in probe
  • For use with Imperial electric fans
  • Probe installs into radiator fins
See More

Dorman – Clutch Fan Blade: Steel, Cost Effective And Reliable (Part No.620-154)

Clutch Fan Blade: Steel, Cost Effective And Reliable

from

$79.99
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

Product Features:
  • Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Felpro – Engine Water Pump Gasket (Part No.35066)

Engine Water Pump Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

1982 Ford F-250 Pickup Cooling and Climate Controls

You count on your 1982 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 142 Cooling and Climate Controls ranging in price from $0.99 to $569.99, you’re sure to find everything you need for your 1982 Ford F-250 Pickup.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 17 different brands like Carquest Premium, Permatex, and Motorad UltraStats. 1982 Ford F-250 Pickup Cooling and Climate Controls start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 5,525 extensive product reviews on 1982 Ford F-250 Pickup Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Radiator Cap: 13 PSI with 4.5 stars and Radiator Cap: 13 PSI with 4.8 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1982 Ford F-250 Pickup below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 1982 Ford F-250 Pickup

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1982 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like Carquest Premium, Permatex, Motorad UltraStats, and even more.

Popular Flex A Lite Cooling and Climate Controls

You’ll find popular Flex A Lite brand products across Engine Cooling Parts. All are waiting to get your 1982 Ford F-250 Pickup back on the road. Some of the top-rated Flex A Lite products in these categories are:
Belt-Driven Fan Spacer Kit
from $22.99
(1)
Belt-Driven Fan Spacer Kit
Radiator Fan Spacers

Top-Rated Carquest Premium Cooling and Climate Controls


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1982 Ford F-250 Pickup, and some of our most reviewed Carquest Premium parts include:
Standard Thermostat: 195 Degrees
from $9.99
(107)
Standard Thermostat: 195 Degrees
Thermostats
A/C Blue Orifice Tube
from $4.99
(97)
A/C Blue Orifice Tube
Expansion Valve and Orifice Tubes
Severe Temp Automatic Adjusting Orifice Tube
from $15.99
(97)
Severe Temp Automatic Adjusting Orifice Tube
Expansion Valve and Orifice Tubes

FAQs for 1982 Ford F-250 Pickup Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 1982 Ford F-250 Pickup?

Out of 142 Cooling and Climate Controls for the 1982 Ford F-250 Pickup, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Standard Thermostat: 180 Degrees
from $9.99
(36)
Standard Thermostat: 180 Degrees
Thermostats

What are the top-rated 1982 Ford F-250 Pickup Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 1982 Ford F-250 Pickup based on customer reviews/ratings are:
Radiator Cap: 13 PSI
from $9.79
(51)
Radiator Cap: 13 PSI
“It’s a radiator cap, it keeps the coolant in the radiator under pressure. Works as it should”
Radiator Cap: 13 PSI
from $10.49
(48)
Radiator Cap: 13 PSI
“Like the vent feature.”
Heater Core
from $49.99
(45)
Heater Core
“After 38 years the original heater core started leaking. Purchased part 398247 for my 1984 F150 with factory A/C. It fits perfectly and puts out the h”