1980 Honda Civic Steering and Chassis Parts
More 1980 Honda Civic Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1980 Honda Civic, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1980 Honda Civic Steering and Chassis Parts
MOOG – Ball Joint (Part No.K9802)
from
$60.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Ball Joint (Part No.K90469)
from
$35.49
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Pressure Line Hose Assembly (Part No.40221)
from
$138.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Carquest Premium – Pressure Hose Assembly (Part No.35739)
from
$198.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
MOOG – Alignment Shim (Part No.K995-4)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Shim (Part No.K995-3)
from
$11.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Dorman – Suspension Control Arm (Part No.520-439)
from
$82.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Driveworks – Suspension Control Arm and Ball Joint Assembly (Part No.520-675)
from
$53.99
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Driveworks’ Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
Rare Parts – Radius Arm Bushing (Part No.RP22465)
from
$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- UV resistant
- Improves vehicle handling
- No Squeak
Whiteline – Strut Rod To Chassis Bushing (Part No.W82151)
from
$34.99
Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-P038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Maval – Short Steering Rack, Remanufactured (Part No.M1000389899MAV)
from
$411.96
Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.
Product Features:
See More
Product Features:
- OE quality and direct fit replacement
- Remanufacture based on highest quality standards
- Computerized tests insure that all products meet the OE performance specification.
- Performance and quality approvals from OE steering gear and pump manufacturers world wide
Cardone – Rack and Pinion Assembly (Part No.26-1769)
from
$284.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Driveworks – Tie Rod End (Part No.DW-EV469)
from
$37.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Carquest Premium – TIE ROD END (Part No.310-65838)
from
$58.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Driveworks – Steering Tie Rod End (Part No.DW-EV299)
from
$13.79
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Driveworks – Tie Rod End (Part No.DW-ES2095R)
from
$9.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Driveworks – Steering Tie Rod End (Part No.DW-EV217)
from
$30.49
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Rare Parts – Sway Bar Fr Bush (Part No.RP22038)
from
$24.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Bushing (Part No.RP16231)
from
$36.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Frame Bushing (Part No.RP19800)
from
$20.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Febi – Sway Bar Bushing (Part No.L1050293292FEB)
from
$7.51
The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Rare Parts – Sway Bar Bushing (Part No.RP16138)
from
$31.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Popular 1980 Honda Civic Steering and Chassis Parts Categories
1980 Honda Civic Steering and Chassis Parts
You count on your 1980 Honda Civic to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 25 Steering and Chassis Parts ranging in price from $8.99 to $124.99, you’re sure to find everything you need for your 1980 Honda Civic.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 9 different brands like Imperial, Driveworks, and National. 1980 Honda Civic Steering and Chassis Parts start as low as $8.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,525 extensive product reviews on 1980 Honda Civic Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Ball Joint with 3.0 stars and Tie Rod End with 3.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1980 Honda Civic below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1980 Honda Civic
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1980 Honda Civic running right for years to come. In our inventory you’ll find brands like Imperial, Driveworks, National, and even more.
Popular National Steering and Chassis Parts
You’ll find popular National brand products across Steering Shafts. All are waiting to get your 1980 Honda Civic back on the road. Some of the top-rated National products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1980 Honda Civic, and some of our most reviewed Imperial parts include:
FAQs for 1980 Honda Civic Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1980 Honda Civic?
Out of 25 Steering and Chassis Parts for the 1980 Honda Civic, the most popular in our inventory are:
What are the top-rated 1980 Honda Civic Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1980 Honda Civic based on customer reviews/ratings are:
from
$14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses.
11/32″ is an odd size hose. Th”
