1977 Ford F-350 Performance and Racing Products

Essential 1977 Ford F-350 Performance and Racing Products

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1447)

Exhaust Manifold Gasket Set

from

$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

MSD Ignition – Distributor; Ford 351W; Vacuum Advance (Part No.8478)

Distributor; Ford 351W; Vacuum Advance

from

$653.99
The street pro-billet distributors are the perfect choice for powerful engines that see plenty of street time. The street models share the same features as the small diameter models shown above, plus feature a vacuum advance. This canister provides improved economy and an accurate mechanical advance lets you dial-in an advance curve to match your driving needs. A magnetic pick-up produces accurate trigger signals that remain stable throughout the entire rpm range of your engine and is completely maintenance-free.

Product Features:
  • Billet housing 5/8 in. smaller dia. than stock Ford distributors
  • CARB E.O. Approved
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • QPQ coated polished steel shaft; guided by sealed ball bearings
  • Advance plate and weights are fine blanked from chrome moly steel
  • QPQ coated for friction reduction
  • Mech. advance assem. can be locked out for crank trigger systems
  • Advance weight pins are staked and tig welded to the plate
See More

Edelbrock – Sure Seat Valve Springs for Ford 351W V8 (Part No.5882)

Sure Seat Valve Springs for Ford 351W V8

from

$52.99
Product Features:
  • Non-Rotator Type
  • 1.384 in. Outer Diameter
  • 1.020 in. Inner Diameter
  • 1.020 in. Coil Blind
  • Set of 16
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.4.2140G)

Leaf Spring Bushing Set

from

$70.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

B & M – Automatic Shifter, Stealth Pro Ratchet 3 and 4 Speed (Part No.81120)

Automatic Shifter, Stealth Pro Ratchet 3 and 4 Speed

from

$549.99
The Stealth Pro Ratchet shifter is one of our most popular and easiest to operate race shifters. Features include positive ratcheting design that self-centers the handle after each shift giving you maximum clearance behind the shifter and will not allow y

Product Features:
  • Reverse Lockout Meets NHRA And IHRA Requirements
  • Carbon Fiber Look Without The Cost
  • Reliable And Race Proven Shifter Design
  • Short Throw
  • Stick Returns to Center
See More

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Black Finish (Part No.21213)

Performer 289 Intake Manifold for Small-Block Ford, Black Finish

from

$442.99
Edelbrock part #21213 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8’s without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.5 in. Front Height, 4.12 in. Center Height, 4.75 in. Rear Height
  • Black Powder Coated Finish
  • Made In The USA
See More

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$38.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Thick parallel ground washer provides more accurate, uniform torque
  • Hex Prevents Socket Slippage
  • Accurate And Uniform Torque
  • Black Plated Finish
See More

Spectre – Water Neck (Part No.4232)

Water Neck

from

$23.99
Spectre’s Ford small block water neck fits 1965 – 19475 Ford 221, 289, 302 and 351W engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes the bolts and sealing O-ring, and also features a 1/2 inch outside diameter by-pass hose connection.

Product Features:
  • Fits 1965 – 19475 Ford 221, 289, 302 and 351W engines
  • Includes bolts and sealing O-ring
  • Has additional 1/2 inch by-pass hose fitting
  • Chrome plated
  • Designed for OEM fit
  • Easy to install
See More

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

Remote Oil Filter Kit

from

$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

Product Features:
  • Relocate oil filter to an easy access location
See More

Edelbrock – SBF Timing Cover, 65-78 289(non K-Code) & 302 69-87 351 (Part No.4250)

SBF Timing Cover, 65-78 289(non K-Code) & 302 69-87 351

from

$210.99


Product Features:
  • Designed for 1500 to 7000 Performance
  • Large Plenum
  • Long Tapered Runners
  • 90mm. Throttle Body Opening
  • Polished Finish
See More

Edelbrock – Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.1825)

Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$427.99
The Edelbrock 1825 Thunder Series AVS 650 CFM manual choke carburetor has been designed and calibrated to deliver optimum off-road performance. Several characteristics make the 1825 Thunder Series AVS 650 CFM manual choke carburetor an outstanding street

Product Features:
  • Spring Loaded Needles/Seat Increase Performance
  • New Qwik-Tune Adjustable Secondary Air Valve
  • Distinctive Black Accented Hardware
  • Lightweight Ball-Burnished Aluminum
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
See More

Mr. Gasket – Engfullgsktset (Part No.7127)

Engfullgsktset

from

$80.99
Kit includes cylinder head gaskets, intake gaskets, exhaust gaskets, oil pan gaskets, valve cover gaskets, timing cover gaskets, fuel pump gaskets, water pump gaskets, distributor gaskets, thermostat gaskets, and rear main seals. For OE replacement, high-performance street, drag racing, or oval track racing.

Product Features:
  • Designed for stock, non-high performance engine rebuilds
  • Engineered to meet or exceed OE gasket and seal specifications
  • Overhaul gasket kits include all gaskets and seals to complete engine rebuild
See More

Edelbrock – Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions (Part No.7265)

Intake Manifold Gasket for 302 E-Boss & 351W E-Boss Clevor Conversions

from

$28.99
Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

Lakewood – Clutch Fork Pivot Ball-Adj:GM (Part No.15501)

Clutch Fork Pivot Ball-Adj:GM

from

$45.99
Designed to allow additional adjustment of the clutch fork height to eliminate clutch release problems when installing a high performance clutch. Recommended for use with Lakewood safety bell housings. Available for most GM, Ford, and Mopar applications. Adjustable dowel pins correct for improper register bore alignment of bell housing.

Product Features:
  • Allows Additional Adjustment
  • Eliminates Clutch Release Problems
See More

Earls Performance Product – Solo Bleed (Part No.280021ERL)

Solo Bleed

from

$32.59


Product Features:
  • Prevents Air Inclusion
  • Direct Replacement
  • For OE Bleeders
  • One Person Bleeds Safely
  • Without The Mess
  • No Chance Of Air Bubbles
See More

Edelbrock – Water Pump for Small-Block Ford 1970-79 351C and 351M/400 in Polished Finish (Part No.8849)

Water Pump for Small-Block Ford 1970-79 351C and 351M/400 in Polished Finish

from

$451.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$100.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Accel – Universal Fit Graphite Suppression; Spark Plug Wire Set (Part No.8026)

Universal Fit Graphite Suppression; Spark Plug Wire Set

from

$128.99
These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • Heavy Duty 8.8mm Oversized Silicone Jacket
  • 500 Ohms/ft. Of Resistance
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

B & M – Flexplate (Part No.50237)

Flexplate

from

$158.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for Ford, Lincoln and Mercury (externally balanced) 289 and 302ci V8 engines with 28.2 ounce imbalance. Features include high tensile strength steel to resist elongation and cracking, 11.4 inch bolt pattern and 164 tooth ring gear. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M flexplates are ideal for hot rods, street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with C4 and C6 automatic transmissions.

Product Features:
  • NHRA/IHRA Legal For All Classes
  • Includes SFI Certification Sticker
  • Ideal For Street Applications
  • To Extreme Duty Racing
  • To High RPM Use
See More

K&N – Replacement Air Filter (Part No.E-1200)

Replacement Air Filter

from

$149.99
K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for the majority of vehicles on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need.

Product Features:
  • This is the last air filter your vehicle will ever need!
  • Designed to boost horsepower and rate of acceleration
  • Can be cleaned and used again
  • High air flow with exceptional filtration
  • Lasts up to 50,000 miles before cleaning is required depending on driving conditions
  • Works with original equipment manufacturer vehicle electronics
  • Emissions legal in all 50 US states
  • Will NOT void vehicle warranty
  • Million Mile Limited Warranty®
See More

Edelbrock – Signature Series Valve Covers: Ford 351M-400 & 351C V8, Chrome Steel, Set Of 2 (Part No.4461)

Signature Series Valve Covers: Ford 351M-400 & 351C V8, Chrome Steel, Set Of 2

from

$83.99
The Edelbrock #4461 Signature Series Valve Covers are designed for Ford 351M-400 and 351C V8 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:
  • Ford 351M-400 & 351C V8
  • Short
  • Chrome Steel
  • Set Of Two
  • Rubber Grommets For Breather
See More

Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)

Performer RPM Series fuel pump is for 289-351W Ford

from

$177.99
Product Features:
  • Mechanical Operation
  • Fuel Sending Unit Not Included
  • For Small-Block 289-351 Ford Engines
  • In Tank Mounting Type
  • 110 GPH
See More

Energy Suspension – Sway Bar Bushing Set (Part No.4.5105G)

Sway Bar Bushing Set

from

$32.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Accel – Distributor Cap And Rotor Kit (Part No.8230)

Distributor Cap And Rotor Kit

from

$108.99


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Spectre – Oil Pan (Part No.5490)

Oil Pan

from

$196.99
Spectre’s Chrome Oil Pans feature a front sump and triple chrome plating. This product is designed to fit Ford passenger cars and 2 wheel drive trucks with 351C, 351M, and 400 engines. This OEM replacement oil pan is manufactured using high quality materials and is engineered for optimum fit and function.

Product Features:
  • Triple chrome-plated
  • Steel construction
  • Front sump
  • OEM replacement.
See More

Edelbrock – Front Timing Cover Gasket Set #6991 For Small-Block Ford, With Front Seal (Part No.6991)

Front Timing Cover Gasket Set #6991 For Small-Block Ford, With Front Seal

from

$28.99
Available in kits including front cover gasket, crankshaft seal, fuel pump and water pump gasket or including cover gasket and front seal.

Product Features:
  • Timing Cover Gasket And Oil Seal Kit
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Popular 1977 Ford F-350 Performance and Racing Products Categories

1977 Ford F-350 Performance and Racing Products

You count on your 1977 Ford F-350 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 195 Performance and Racing Products ranging in price from $10.99 to $1,195.00, you’re sure to find everything you need for your 1977 Ford F-350.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 24 different brands like Accel, Mr. Gasket, and Edelbrock. 1977 Ford F-350 Performance and Racing Products start as low as $10.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 754 extensive product reviews on 1977 Ford F-350 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Water Neck with 3.8 stars and High Perf. Full-Flow Lube Spin-on with 4.0 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1977 Ford F-350 below to get started!

Top-Rated Performance and Racing Products Brands For Your 1977 Ford F-350

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Ford F-350 running right for years to come. In our inventory you’ll find brands like Accel, Mr. Gasket, Edelbrock, and even more.

Popular Proform Performance and Racing Products

You’ll find popular Proform brand products across Performance Distributors. All are waiting to get your 1977 Ford F-350 back on the road. Some of the top-rated Proform products in these categories are:
Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines
from $228.99
(4)
Ford HEI Distributor, Red Cap, For Ford 289-302 V8 Engines
Performance Distributors

Top-Rated Edelbrock Performance and Racing Products


If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Performance and Racing Products for your 1977 Ford F-350, and some of our most reviewed Edelbrock parts include:

FAQs for 1977 Ford F-350 Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1977 Ford F-350?

Out of 195 Performance and Racing Products for the 1977 Ford F-350, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
Lower Intake Manifold Gasket Set: 11 Piece Set
from $33.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets

What are the top-rated 1977 Ford F-350 Performance and Racing Products?

Top-rated Performance and Racing Products for your 1977 Ford F-350 based on customer reviews/ratings are:
Water Neck
from $19.99
(12)
Water Neck
“FINALLY… first time not having to re-do flimsy paper gaskets. Aside from thicker cork gasket, O ring is only way to go !”
High Perf. Full-Flow Lube Spin-on
from $16.99
(4)
High Perf. Full-Flow Lube Spin-on
“Filter size for my boat. OMC 460. works fine. HP filters have a bypass so that clogs do not cause the engine to starve for oil… important for HP eng”
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”