1966 Ford Mustang Steering and Chassis Parts

Essential Steering and Chassis Parts for 1966 Ford Mustangs

Energy Suspension – SwyBarLink (Part No.9.8166G)

SwyBarLink

from

$26.99
SwyBarLink

Rare Parts – Pitman Arm (Part No.RP20131)

Pitman Arm

from

$185.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Reduces wander
  • Reduces vibration
  • Restores OE alignment
See More

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Flowtech – Power Steering Pump Bracket (Part No.10041FLT)

Power Steering Pump Bracket

from

$38.49


Product Features:
  • Chrome Plated
  • Show Quality
  • For Custom Installations
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK80727)

Control Arm and Ball Joint Assembly

from

$197.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
  • QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
  • GREASEABLE SOCKETá–┐Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants┐
  • HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
See More

MOOG – Idler Arm (Part No.K8158)

Idler Arm

from

$143.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Heavy-duty design
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered steel composition results in a stronger component
  • Powdered metal gusher bearing design enables grease to flow through bearing to
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Carquest Premium – Power Steering Kit, Control Valve Seal Assembly (Part No.7881)

Power Steering Kit, Control Valve Seal Assembly

from

$181.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More

Cardone – Remanufactured Steering Gear (Part No.27-6539)

Remanufactured Steering Gear

from

$161.99
The steering gear box is the heart of the vehicle¿s steering system. It guides the wheels¿ movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. E ach unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.

Product Features:
  • 100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
  • 100% new O-rings and lip seals ensure leak-free, long-lasting performance.
  • All critical components are tested to ensure product reliability.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
  • Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Whiteline – Sway Bar Mount Saddle (Part No.KBR10)

Sway Bar Mount Saddle

from

$49.99
Universal sway bar mount saddle. Check out the universal sway bar D mount range offering 14-30mm diameter bushings.

Product Features:
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
See More

Lares – New Steering Coupling Assembly (Part No.201)

New Steering Coupling Assembly

from

$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More

MOOG – Camber Adjusting Kit (Part No.K90476)

Camber Adjusting Kit

from

$32.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25522)

Tie Rod Sleeve

from

$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 3/8" Female Inv. Flare x 7/16" Male Inv. Flare (Part No.35358)

Power Steering Pressure Hose Assembly, 3/8" Female Inv. Flare x 7/16" Male Inv. Flare

from

$53.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201532)

Stabilizer Bar Bushing Kit

from

$22.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

National – Multi Purpose Seal (Part No.340151)

Multi Purpose Seal

from

$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Cardone – Remanufactured Power Steering Pump (Part No.20-281P1)

Remanufactured Power Steering Pump

from

$109.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)

Pump Drive Shaft Seal Kit

from

$7.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Rare Parts – 11/16-18 Nut (Part No.RP15259)

11/16-18 Nut

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Retains bushings
See More

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Tie Rod End Adjusting Sleeve

from

$28.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Engineered to meet or exceed OE Performance
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

MOOG – Strut Rod Bushing Kit (Part No.K8157)

Strut Rod Bushing Kit

from

$79.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to meet or exceed OE requirements
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Rare Parts – Ball Joint (Part No.RP11936)

Ball Joint

from

$153.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Carquest Premium – Power Steering Return Hose Assembly, 3/8" Swivel "O" Ring Type III x 3/8" I.D. Hose (Part No.36579)

Power Steering Return Hose Assembly, 3/8" Swivel "O" Ring Type III x 3/8" I.D. Hose

from

$39.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

National – Multi Purpose Seal (Part No.8773S)

Multi Purpose Seal

from

$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

MOOG – Tie Rod End (Part No.ES80805)

Tie Rod End

from

$57.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Whiteline – Sway Bar Link Washers (Part No.KW2)

Sway Bar Link Washers

from

$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Rare Parts – Center Link (Part No.RP25823)

Center Link

from

$202.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Full Ball Stud
  • Greaseable
  • Heat treated components
  • Low Friction
See More

Powercraft – Power Cylinder Complete Rebuild Kit (Part No.7874)

Power Cylinder Complete Rebuild Kit

from

$21.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Upgrade your 1966 Ford Mustang with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1966 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 129 Steering and Chassis Parts for the 1966 Ford Mustang, designed to meet your needs without breaking the bank. From Sway Bar replacements to Ball Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1966 Ford Mustang at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.99 to $615.99, with an average price of $63.52. Our 129 Steering and Chassis Parts in stock come from 17 trusted brands, so you’re sure to find the right part for your 1966 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Ford Mustang, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Driveworks, Carquest Premium, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Driveworks and Carquest Premium also bring quality to the table, with Steering and Chassis Parts available starting at $2.99, and at an average 4 stars rating. With 1,803 customer reviews and counting, our 1966 Ford Mustang Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1966 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 1966 Ford Mustang!

Best-Selling Sway Bars for 1966 Ford Mustangs

Enhance the driving experience in your Ford with 26 quality Sway Bar components, starting at $10.29.

MOOG – Stabilizer Bar Link Kit (Part No.K700528)

Stabilizer Bar Link Kit

from

$24.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K5227)

Stabilizer Bar Bushing Kit

from

$10.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Driveworks – Sway Bar Link Kits (Part No.DW-K8989)

Sway Bar Link Kits

from

$18.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot with grease relief valve keeps contaminants out
  • Performance tested to ensure durability
See More

TRW – Sway Bar Bushing Kit (Part No.L1049456629TRW)

Sway Bar Bushing Kit

from

$27.52
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Carquest Premium – Stabilizer Bar Link Kit (Part No.500-316781)

Stabilizer Bar Link Kit

from

$18.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K90393)

Stabilizer Bar Bushing Kit

from

$19.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K90394)

Stabilizer Bar Bushing Kit

from

$20.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Rare Parts – Sway Bar Link Kit (Part No.RP15642)

Sway Bar Link Kit

from

$17.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Complete with bolt ,washers, and nut
  • Improves body roll
See More

Energy Suspension – SwyBarLink (Part No.9.8163G)

SwyBarLink

from

$26.99
SwyBarLink

Whiteline – Sway Bar Mount Saddle (Part No.KBR10)

Sway Bar Mount Saddle

from

$49.99
Universal sway bar mount saddle. Check out the universal sway bar D mount range offering 14-30mm diameter bushings.

Product Features:
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
See More

Whiteline – Sway Bar Link (Part No.W21807S)

Sway Bar Link

from

$47.99
Whiteline sway bar products improve sway bar effectiveness for more balanced and predictable cornering. Perfect for restorers.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Rare Parts – Sway Bar Bushing (Part No.RP15925)

Sway Bar Bushing

from

$34.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

TRW – Sway Bar Bushing Kit (Part No.L1049456637TRW)

Sway Bar Bushing Kit

from

$26.58
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Energy Suspension – SwyBarLink 1 EA ENRGY (Part No.9.8163R)

SwyBarLink 1 EA ENRGY

from

$25.99
SwyBarLink 1 EA ENRGY

Rare Parts – Stab Bar Link Kit (Part No.RP22190)

Stab Bar Link Kit

from

$25.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Complete with bolt ,washers, and nut
  • Improves body roll
See More

Rare Parts – Sway Bar Link Kit (Part No.RP17014)

Sway Bar Link Kit

from

$23.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Complete with bolt ,washers, and nut
  • Improves body roll
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21058G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 24mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21047G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 22mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21053G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 19mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21086G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 18mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21212G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 25mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W22789G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 28mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21063G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 20mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21105G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 21mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21259G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 16mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Link Washers (Part No.KW2)

Sway Bar Link Washers

from

$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Most Popular 1966 Ford Mustang Ball Joints

Customize your Ford with 12 Ball Joints products like Lower Ball Joints and Lower Control Arm and Ball Joints, all priced under $124.99.

MOOG – Ball Joint (Part No.K8142)

Ball Joint

from

$64.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Driveworks – Ball Joint (Part No.DW-K8036)

Ball Joint

from

$10.49
Product Features:
  • Forged housing provides exceptional strength and durability
  • Oxidation film on the surface of the metal protects against corrosion
  • Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
  • Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
See More

MOOG – Ball Joint (Part No.K8036)

Ball Joint

from

$39.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Larger grease reservoir and easy-to-install pre-tapped grease fitting hole for improved maintenance
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Dorman – Suspension Control Arm (Part No.520-395)

Suspension Control Arm

from

$112.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621428)

Control Arm and Ball Joint Assembly

from

$124.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

Dorman – Suspension Control Arm (Part No.520-229)

Suspension Control Arm

from

$121.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

KAI – Control Arm Assembly (Part No.GMK3020972641S)

Control Arm Assembly

from

$119.99
New Goodmark Driver Or Passenger Side Upper Front Control Arm Assembly With Balljoint And Shaft, 2 Required

Product Features:
  • 2 Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Control Arm Assembly (Part No.GMK3020973641S)

Control Arm Assembly

from

$96.99
New Goodmark Driver Or Passenger Side Front Lower Control Arm Assembly With Balljoint, 2 Required

Product Features:
  • 2 Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK643575)

Suspension Control Arm and Ball Joint Assembly

from

$93.99
Product Features:
  • GREASEABLE SOCKETá–Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminantsá
  • KEEPS DIRT AND WATER OUT –Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminantsá
  • ADDED CORROSION PROTECTIONá–Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grimeá
  • PREMIUM BUSHINGS –Pre-installed with optimized stiffness to inhibit noise for a comfortable rideá
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK8035)

Suspension Control Arm and Ball Joint Assembly

from

$86.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength durability and confidence is required.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Rare Parts – Control Arm with Ball Joint (Part No.RP10271)

Control Arm with Ball Joint

from

$76.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Rare Parts – Ball Joint (Part No.RP10141)

Ball Joint

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Top Picks for 1966 Ford Mustang Gear Boxes

Upgrade Ford Mustangs with top-quality Gear Boxes parts, including 2 OEM and aftermarket selections for your 1966 model.

National – Multi Purpose Seal (Part No.473234)

Multi Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Lares – Remanufactured Manual Steering Gear Box (Part No.8716)

Remanufactured Manual Steering Gear Box

from

$334.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

In-Demand Power Steering Parts for 1966 Ford Mustangs

Select from 48 premium Power Steering Parts parts for your 1966 Ford Mustang, with prices ranging from $2.99 to $231.99.

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36196)

3/8" I.D. Return Hose J189

from

$39.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Powercraft – Power Cylinder Piston Rod Seal Kit (Part No.7877)

Power Cylinder Piston Rod Seal Kit

from

$21.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.35002)

3/8" I.D. Return Hose J189

from

$46.49
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Cardone – Remanufactured Power Steering Power Cylinder (Part No.29-6735)

Remanufactured Power Steering Power Cylinder

from

$212.99
CARDONE Power Cylinders are remanufactured to meet or exceed O.E. performance. All critical components are tested to ensure proper fit, function, and consistent quality.

Product Features:
  • Each Power Cylinder is computer tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure quiet, like-new performance.
  • Units are supplied with all new O.E. style seals and O-rings to eliminate chance of leaks.
  • Guaranteed fit and function.
  • Meets or exceeds O.E.M performance.
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Powercraft – Control Valve Complete Rebuild Kit (Part No.7885)

Control Valve Complete Rebuild Kit

from

$101.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Powercraft – Power Cylinder Complete Rebuild Kit (Part No.7875)

Power Cylinder Complete Rebuild Kit

from

$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

3/8" ID Return Hose (sold by each)

from

$2.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

National – Bearings (Part No.LM67010)

Bearings

from

$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Cardone – Remanufactured Power Steering Pump (Part No.20-6092)

Remanufactured Power Steering Pump

from

$92.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36197)

3/8" I.D. Return Hose J189

from

$52.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)

Pump Drive Shaft Seal Kit

from

$7.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Carquest Premium – Power Steering Cylinder Hose Assembly, 5/16" Male Inv. Flare x 5/16" Male Inv. Flare (Part No.35312)

Power Steering Cylinder Hose Assembly, 5/16" Male Inv. Flare x 5/16" Male Inv. Flare

from

$40.49
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Powercraft – Power Cylinder Boot Kit (Part No.8901)

Power Cylinder Boot Kit

from

$66.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

KAI – PS Power Cylinder Boot (Part No.GMK3020992641S)

PS Power Cylinder Boot

from

$16.99
New Goodmark Power Steering Cylinder Boot And Bushing Kit

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Lares – Remanufactured Power Steering Pump (Part No.2035)

Remanufactured Power Steering Pump

from

$137.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Carquest Premium – Power Steering Kit, Control Valve Seal Assembly (Part No.7882)

Power Steering Kit, Control Valve Seal Assembly

from

$48.49
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More

Powercraft – Pump Seal Kit (Part No.8501)

Pump Seal Kit

from

$32.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 5/16" Male Inv. Flare x 5/16" Male Inv. Flare (Part No.39959)

Power Steering Pressure Hose Assembly, 5/16" Male Inv. Flare x 5/16" Male Inv. Flare

from

$41.49
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Lares – Remanufactured Power Steering Cylinder (Part No.22)

Remanufactured Power Steering Cylinder

from

$216.99
Power Steering Cylinders are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All units have new chrome shafts. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 1/4" Male Inv. Flare x 3/8" Female S.A.E. (Part No.36137)

Power Steering Pressure Hose Assembly, 1/4" Male Inv. Flare x 3/8" Female S.A.E.

from

$84.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 1/4" Male Inv. Flare x 3/8" Female S.A.E., 1/4" Male Inv. Flare x 3/8" Female S.A.E. (Part No.35315)

Power Steering Pressure Hose Assembly, 1/4" Male Inv. Flare x 3/8" Female S.A.E., 1/4" Male Inv. Flare x 3/8" Female S.A.E.

from

$77.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 5/16" Male Inv. Flare x 5/16" Male Inv. Flare (Part No.39954)

Power Steering Pressure Hose Assembly, 5/16" Male Inv. Flare x 5/16" Male Inv. Flare

from

$43.49
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Carquest Premium – Power Steering Kit, Control Valve Seal Assembly (Part No.7881)

Power Steering Kit, Control Valve Seal Assembly

from

$181.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More

Carquest Premium – Power Steering Return Hose Assembly, 3/8" Male Inv. Flare x 3/8" I.D. Hose (Part No.36269)

Power Steering Return Hose Assembly, 3/8" Male Inv. Flare x 3/8" I.D. Hose

from

$79.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Powercraft – Control Valve Seal Kit (Part No.7889)

Control Valve Seal Kit

from

$31.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Lares – PS CYLINDER-NEW (Part No.10022)

PS CYLINDER-NEW

from

$231.99
PS CYLINDER-NEW

Lares – PS PUMP-NEW (Part No.12013)

PS PUMP-NEW

from

$191.99
PS PUMP-NEW

Lares – Remanufactured Power Steering Pump (Part No.2036)

Remanufactured Power Steering Pump

from

$137.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Lares – Remanufactured Power Steering Pump (Part No.2013)

Remanufactured Power Steering Pump

from

$134.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Cardone – Remanufactured Power Steering Pump (Part No.20-6305)

Remanufactured Power Steering Pump

from

$84.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:
  • All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
  • All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Units are supplied with 100% tested and calibrated pressure relief valves.
  • FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Flowtech – Power Steering Pump Bracket (Part No.10041FLT)

Power Steering Pump Bracket

from

$38.49


Product Features:
  • Chrome Plated
  • Show Quality
  • For Custom Installations
See More

BBB Industries – Power Steering Filter (Part No.991-FLT4)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – Power Steering Filter (Part No.991-FLT2)

Power Steering Filter

from

$28.99
All Steering Power Filter
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

POWER STEERINGFILTER

from

$28.99
POWER STEERINGFILTER

Driveworks – Tapered Roller Bearing (Part No.S-LM-29749)

Tapered Roller Bearing

from

$8.79
Product Features:
  • Brand may vary by location
See More

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

POWER STEERINGFILTER

from

$6.99
POWER STEERINGFILTER

Most Sold 1966 Ford Mustang Tie Rods

Explore our best-selling Ford parts for the 1966 Mustang among 20 OEM and aftermarket options starting from $5.99.

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Tie Rod End Adjusting Sleeve

from

$28.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Engineered to meet or exceed OE Performance
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)

Steering Tie Rod End Adjusting Sleeve

from

$21.49
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13103G)

Tie Rod Dust Boot

from

$6.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Tie Rod End Adjusting Sleeve

from

$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

KAI – Steering Tie Rod (Part No.GMK3020976641)

Steering Tie Rod

from

$22.99
New Goodmark Driver Or Passenger Side Inner Tie Rod End, For 6 Cylinder Models Without Power Steering

Product Features:
  • For 6 Cylinder Models Without Power Steering
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

MOOG – Tie Rod End (Part No.ES713)

Tie Rod End

from

$88.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

KAI – Steering Tie Rod End (Part No.GMK3020976642)

Steering Tie Rod End

from

$17.99
New Goodmark Driver Or Passenger Side Outer Tie Rod End, For 6 Cylinder Models Without Power Steering, 2 Required

Product Features:
  • For 6 Cylinder Models Without Power Steering 2 Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Rare Parts – Tie Rod End (Part No.RP25437)

Tie Rod End

from

$43.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Greaseable
  • Precision machining tolerances
  • Heat treated components
  • Low friction
See More

MOOG – Tie Rod End (Part No.ES336L)

Tie Rod End

from

$62.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13103R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

MOOG – Tie Rod End (Part No.ES336R)

Tie Rod End

from

$59.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Rare Parts – Tie Rod End (Part No.RP25417)

Tie Rod End

from

$306.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Greaseable
  • Precision machining tolerances
  • Heat treated components
  • Low friction
See More

Rare Parts – Tie Rod End (Part No.RP25418)

Tie Rod End

from

$254.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Greaseable
  • Precision machining tolerances
  • Heat treated components
  • Low friction
See More

Rare Parts – Tie Rod End (Part No.RP25420)

Tie Rod End

from

$195.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Greaseable
  • Precision machining tolerances
  • Heat treated components
  • Low friction
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25675)

Tie Rod Sleeve

from

$144.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Rare Parts – Tie Rod End (Part No.RP25401)

Tie Rod End

from

$101.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Rare Parts – Tie Rod End (Part No.RP25402)

Tie Rod End

from

$77.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

TRW – Tie Rod End (Part No.M3010456298TRW)

Tie Rod End

from

$69.77
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW’s tie rod end joints includes the latest, high performance designs which incorporate the following features:

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
See More

MOOG – Tie Rod End (Part No.ES317R)

Tie Rod End

from

$65.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Tie Rod End (Part No.ES317L)

Tie Rod End

from

$65.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Top-Rated Steering and Chassis Parts Brands For Your 1966 Ford Mustang

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1966 Ford Mustangs. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Driveworks, and Carquest Premium, and more. Steering and Chassis Parts from these brands that fit a 1966 Mustang start at just $2.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 1966 Ford Mustang Steering and Chassis Parts

When it comes to maintaining or upgrading your 1966 Ford Mustang, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 1966 Ford Mustang. With over 5 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $20.95. Plus, with over 211 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Mounting Kit System
from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

Power Steering Oil Cooler
from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

Transmission Oil Cooler Hose
from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Popular Driveworks 1966 Ford Mustang Steering and Chassis Parts

Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1966 Ford Mustang owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1966 Mustang, Advance Auto Parts carries a full inventory of 6 Driveworks Steering and Chassis Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $4.99 to $21.49, plus, with more than 111 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Tapered Roller Bearing
from
$8.79
This product is not rated

Tapered Roller Bearing

“”

Taper Bearing Set
from
$8.99

(47)

Taper Bearing Set

“Good fit”

Taper Bearing Cup
from
$4.99
This product is not rated

Taper Bearing Cup

“”

FAQs for 1966 Ford Mustang Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1966 Ford Mustangs?

Out of 129 Steering and Chassis Parts that fit 1966 Ford Mustangs, the following parts are the top sellers:

What’s the price range for 1966 Ford Mustang Steering and Chassis Parts?

Steering and Chassis Part prices for the 1966 Ford Mustang start at $2.99 and go up to $615.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1966 Ford Mustang?

The average price for Steering and Chassis Parts for the 1966 Ford Mustang is $63.52. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Ford Mustang model years?

Yes, we currently carry Steering and Chassis Parts for 55 model years of Ford Mustangs between 1964 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 1966 Ford Mustang?

The cheapest 1966 Ford Mustang Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 1966 Ford Mustang?

Out of 1,803 reviews by customers, our 1966 Ford Mustang Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1966 Ford Mustang and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 1966 Ford Mustang?

Can I get help with 1966 Ford Mustang Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.

What is your return policy for Ford Mustang Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Ford Mustang Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.