1964 Ford F-250 Pickup Drivetrains
More 1964 Ford F-250 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1964 Ford F-250 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1964 Ford F-250 Pickup Drivetrains
Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)
from
$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.
Product Features:
See More
Product Features:
- 35 spline
- 8 x 3.96″ bolt pattern
- Cut to length design fits 40″-43.5″ applications
- Fits Dana Spicer 60, 70 and 80
National – Bearings (Part No.HM88542)
from
$19.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Trail Repair Kit For Dana 30 And 44 With 1310 Size U/Joint And Straps (Part No.32278)
from
$225.99
Yukon replacement trail repair kit for Dana 30 and 44 with 1310 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44
- 1310 u-joint size
- Kit includes yoke, U-joint, pinion seal, pinion nut and washer, straps, bolts and threadlocker
Yukon Gear – Ford 10.25" & 10.5" Cover Gasket (Part No.23008)
from
$13.99
10.25″ & 10.5″ cover gasket.
Product Features:
See More
Product Features:
- Cover gasket
- Fits Ford 10.25″ and 10.5″
Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)
from
$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
- 3/4″ x 16 thread
Yukon Gear – Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70 (Part No.32352)
from
$288.99
Product Features:
See More
- Nodular iron for added strength
- Thick design
- Durable powder coat finish
- Magnetic drain plug
- Made in USA
- High strength stainless steel fasteners
Yukon Gear – Cross Pin Bolt With 5/16 X 18 Thread For 10.25" Ford (Part No.33241)
from
$11.99
Cross pin bolt with 5/16 x 18 thread for 10.25″ Ford.
Product Features:
See More
Product Features:
- Cross pin bolt for Ford 9.75″ and 10.25″ with c-clip axles
- 5/16″ x 18 thread
MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.330-10)
from
$7.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 330, 331 & 427
- Fits 1-3/16″ bearings
National – Multi Purpose Seal (Part No.710414)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
MOOG Driveline Products – Universal Joint Strap Kit (Part No.331-10)
from
$9.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 330 & 331
- Contains two 1.81″ bolt center clamps and four 5/16-24 x 3/4″ cap screws
Motive Gear – Differential Pinion Seal (Part No.9316)
from
$16.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
Yukon Gear – Axle Spacer For Dana 44 19 Spline & Amc Model 20 – Standard & Trac Loc, Not Powr Lok (Part No.33535)
from
$26.99
Product Features:
See More
- Axle spacer button
- Fits Dana 44 with 19 spline axles and AMC Model 20
- Trac Loc positraction only
Yukon Gear – Dana 44 Complete Shim Kit Replacement (Part No.55021)
Yukon Gear – Replacement Cross Pin Shaft For Spicer 50, Standard Open (Part No.33440)
Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.30040099-75000C)
from
$13.79
Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
Yukon Gear – 10.25" & 10.5" Ford Carrier Installation Kit (Part No.57006)
from
$276.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 10.25″ & 10.5″ differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Ford 10.25″ and 10.5″
- Includes carrier bearings and races and “super” carrier shim kit
Spicer – Universal Joint (Part No.5-1350X)
from
$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
National – Multi Purpose Bearing (Part No.HB-88508-AA)
from
$58.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41020)
from
$125.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1330 u-joint size
- 3.625″ snap ring span
- 1.125″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Left Inner Axle Replacement Seal For Dana 44, 50, Model 35 IFS (Part No.30138)
from
$25.99
Left inner axle replacement seal for Dana 44, 50, Model 35 IFS.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner axle seal
- Left hand side
- Fits Dana Spicer 44 IFS, AMC Model 35 IFS and Dana Spicer 50 IFS
National – Bearings (Part No.HK-4012)
from
$24.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Standard Open Side Gear And Thruster Washer For 10.25" Ford (Part No.33293)
from
$11.99
55P Chevy Passenger Drop Out gasket.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits Ford 10.25″
Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.73 & Down (Part No.26026)
from
$856.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.73 ratio and down only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – Chrome Moly Superjoint Kit, Replacement For Dana 60 (Part No.32088)
from
$1034.99
Yukon Chrome-Moly Super Joint kit for Dana 60. Kit includes (2) 4340 Chrome Moly Super-joints, grease, and Gun.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- 4340 Chromoly cross
- Eliminated needle bearings results in larger trunion for added strength
- Uses ultra high grade antiseize for lubrication
- Not recommended for daily driven use
- Two complete joints, eight full circle snap rings, grease and grease gun
Yukon Gear – Minor Install Kit For Ford 9.75" Differential (Part No.12041)
from
$125.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Ford 9.75″
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
USA Standard Gear – Replacement Spider Gear Set For Dana 50, 30 Spline (Part No.39007)
from
$198.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 30 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Popular 1964 Ford F-250 Pickup Drivetrains Categories
1964 Ford F-250 Pickup Drivetrains
You count on your 1964 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 282 Drivetrains ranging in price from $3.99 to $1,487.99, you’re sure to find everything you need for your 1964 Ford F-250 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Moog, Spicer, and National. 1964 Ford F-250 Pickup Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,518 extensive product reviews on 1964 Ford F-250 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are MileMarker Supreme; Manual Hub with 4.1 stars and Multi Purpose Bearing with 3.4 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1964 Ford F-250 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1964 Ford F-250 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1964 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like Moog, Spicer, National, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Drive Shafts and Axles and Universal Joints. All are waiting to get your 1964 Ford F-250 Pickup back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1964 Ford F-250 Pickup, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1964 Ford F-250 Pickup Drivetrains
What are the most purchased Drivetrains for the 1964 Ford F-250 Pickup?
Out of 282 Drivetrains for the 1964 Ford F-250 Pickup, the most popular in our inventory are:
What are the top-rated 1964 Ford F-250 Pickup Drivetrains?
Top-rated Drivetrains for your 1964 Ford F-250 Pickup based on customer reviews/ratings are:
from
$428.99
(36)
MileMarker Supreme; Manual Hub
“if you follow the directions, this install will go smooth. i used some blue loctite on the allen screws to prevent them from backing out. this took me”
from
$196.99
(19)
MileMarker Street Master; Manual Hub
“Good and easy to install. did not need the install kit that i was told i needed for my 1994 f150.”
