1990 Ford F-250 Pickup Drivetrains
More 1990 Ford F-250 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1990 Ford F-250 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1990 Ford F-250 Pickup Drivetrains
Pro-King – Differential Axle Bearing (Part No.743B280)
from
$42.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Carrier Shim Kit For Dana 50 (Part No.55071)
Cardone – Transfer Case Motor (Part No.48-216)
from
$170.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Product Features:
See More
Product Features:
- All motors are 100% torque tested to ensure strength for proper gear engagement.
- Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
- Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
- Motor magnets are 100% recharged for superior performance and reliability.
- Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
Felpro – Transfer Case Adapter Gasket (Part No.55484)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific, providing unsurpassed quality for a seal you can trust
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
USA Standard Gear – Open Spider Gear Set For Dana Spicer 44, 30 Spline (Part No.39006)
from
$203.99
Product Features:
See More
- Spider gear kit
- Fit Dana Spicer 44 open differential with 30 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Dorman – Transfer Case Gasket (Part No.J71331098749DOR)
from
$11.43
Transfer Case Gasket
Yukon Gear – Replacement Complete Shim Kit For Dana 50 (Part No.55027)
Yukon Gear – Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41138)
from
$396.99
Yukon billet replacement yoke for Dana 60 and 70 with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Stub Axle Snap Ring Clip For 8.8" Ford IFS (Part No.33271)
from
$37.99
Stub axle snap ring clip for 8.8″ Ford IFS.
Product Features:
See More
Product Features:
- Stub axle snap ring
- Fits Ford 8.8″ IFS
Yukon Gear – Hardcore Locking Hub Set For Dana 60, 35 Spline – ’79-’91 GM, ’78-’97 Ford, ’79-’93 Dodge (Part No.29082)
from
$656.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6.
Product Features:
See More
Product Features:
- Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
- 35 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Spicer – Universal Joint (Part No.5-178X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)
Motive Gear – Differential Carrier Bearing Kit – Koyo (Part No.R10.5CK)
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.59018)
from
$427.99
Product Features:
See More
- Fits Chrysler Dana Spicer 60 with 35 spline axles
- 4.56 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
National – Bearings (Part No.B-2812)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Yukon Gear – Dana 28, Dana 30, Dana 44, Dana 50 Outer Stub Snap Ring (Inside Locking Hub) (Part No.33266)
from
$6.99
Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Product Features:
See More
Product Features:
- Outer stub snap ringn for Dana Spicer 28, 30, 44 and 50
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Bearing Race Driver (Part No.56011)
from
$188.99
Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM803110 race
- All steel construction
Yukon Gear – Drive Flange Cap For Dana 44, Engraved (Part No.32135)
Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)
from
$79.99
Seal housing for Dana 60, Zip locker, with o-rings.
Product Features:
See More
Product Features:
- Seal housing for Dana Spicer 60
- Includes o-rings
National – Multi Purpose Seal (Part No.710044)
from
$3.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc (Part No.33053)
from
$5.99
Ford 7.5″ & 8.8″ ring gear bolt, standard Open & TracLoc. 7/16″ x 20.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 7.5″ and 8.8″
- 7/16″ x 20
Yukon Gear – 7/16" To 3/8" Ring Gear Bolt Spacer Sleeve. (Part No.33056)
from
$7.99
7/16″ TO 3/8″ ring gear bolt spacer sleeve.
Product Features:
See More
Product Features:
- Ring gear bolt sleeve
- Adapts 7/16″ to 3/8″
Driveworks – Transfer Case Output Shaft Seal (Part No.S-4503N)
Timken – Trans Case Output Sf (Part No.J7121366772TIM)
from
$33.05
Trans Case Output Sf
Popular 1990 Ford F-250 Pickup Drivetrains Categories
1990 Ford F-250 Pickup Drivetrains
You count on your 1990 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 604 Drivetrains ranging in price from $1.99 to $1,503.99, you’re sure to find everything you need for your 1990 Ford F-250 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 27 different brands like Moog, DriveWorks, and National. 1990 Ford F-250 Pickup Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,449 extensive product reviews on 1990 Ford F-250 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are MileMarker Supreme; Manual Hub with 4.1 stars and Greaseable Super Strength Universal Joint with 3.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1990 Ford F-250 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1990 Ford F-250 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, National, and even more.
Popular Idemitsu Drivetrains
You’ll find popular Idemitsu brand products across Differentials. All are waiting to get your 1990 Ford F-250 Pickup back on the road. Some of the top-rated Idemitsu products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1990 Ford F-250 Pickup, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1990 Ford F-250 Pickup Drivetrains
What are the most purchased Drivetrains for the 1990 Ford F-250 Pickup?
Out of 604 Drivetrains for the 1990 Ford F-250 Pickup, the most popular in our inventory are:
What are the top-rated 1990 Ford F-250 Pickup Drivetrains?
Top-rated Drivetrains for your 1990 Ford F-250 Pickup based on customer reviews/ratings are:
from
$428.99
(36)
MileMarker Supreme; Manual Hub
“if you follow the directions, this install will go smooth. i used some blue loctite on the allen screws to prevent them from backing out. this took me”
