1989 Ford F-250 Pickup Drivetrains
More 1989 Ford F-250 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1989 Ford F-250 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1989 Ford F-250 Pickup Drivetrains
Yukon Gear – Hardcore Locking Hub Set For Dana 60, 35 Spline – ’79-’91 GM, ’78-’97 Ford, ’79-’93 Dodge (Part No.29082)
from
$656.99
These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability & strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 1/3 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction & long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer’s defect. This locking hub set will not fit housings with Bill of Materials numbers 610033-2, 3, 5 or 6.
Product Features:
See More
Product Features:
- Fits 1979-1991 GM, 1978-1997 F350 and 1979-1993 Dodge one ton fronts with Dana Spicer 60
- 35 spline
- All steel construction
- Chromoly internals for added strength
- Low profile bezel to reduce impact with obstacles
- Defaults to locked position
- 1/3 turn from disengaged to engaged
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Yukon Gear – Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41138)
from
$396.99
Yukon billet replacement yoke for Dana 60 and 70 with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Yukon Gear – 10.25" Tracloc (Ford Case) Paper/Composite Lined Clutch Set (Part No.16011)
from
$258.99
10.25″ TracLoc (Ford case) Paper/Composite Lined clutch set, positraction.
Product Features:
See More
Product Features:
- Clutch kit
- Fit Ford 10.25″ Trac Loc positraction without clutch guides
Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-AA)
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Pro-King – Differential Internal Nest Kit (Part No.764A717)
from
$251.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
Yukon Gear – Dana 60 & Dana 70 Power Lok Cross Pin Shaft (Two Needed) (Part No.33315)
from
$156.99
Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 60 and 70
- Powr Lok positraction only
Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)
from
$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.530″ O.D.
Yukon Gear – Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline (Part No.16168)
from
$399.99
Yukon positraction internals for Dana 44 Dura Grip posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Powr Lok. Fits Dura Grip ONLY.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 44 with Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
ATP – DIFF COVER KIT (Part No.111105)
from
$61.99
DIFF COVER KIT
Yukon Gear – Replacement Complete Shim Kit For Dana 50 (Part No.55027)
Milemarker – Hub Conversion Kit (Part No.95-32720)
Felpro – Transfer Case Adapter Gasket (Part No.55484)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific, providing unsurpassed quality for a seal you can trust
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)
from
$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Yukon Gear – Bearing Race Driver (Part No.56013)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM807010 race
- All steel construction
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)
from
$52.99
Air line repair kit, ZIP locker.
Product Features:
See More
Product Features:
- Air line repair kit
- Includes 20′ air line and two repair fittings
Dorman – Spindle Washer – I.D. 1 In.-5/8 In. O.D. 2-1/2 In. Thickness 7/64 In. (sold by each) (Part No.618-041)
from
$3.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Cardone – Transfer Case Motor (Part No.48-207)
from
$102.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Product Features:
See More
Product Features:
- All motors are 100% torque tested to ensure strength for proper gear engagement.
- Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
- Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
- Motor magnets are 100% recharged for superior performance and reliability.
- Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
National – Wheel Bearing and Seal Kit (Part No.SBK-1)
from
$19.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Spindle bearing and seal kit
- Includes all components required to complete the repair
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.73 & Down (Part No.26026)
from
$856.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.73 ratio and down only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Victor Reinz – Differential Cover Gasket (Part No.71-14868-00)
from
$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)
from
$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 60
- Fits standard open and Trac Loc applications
EVO Driveline – Remanufactured Transfer Case (Part No.UMT417M)
from
$1503.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.
Product Features:
See More
Product Features:
- Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
- OEM cores are processed as individual units throughout the tear down and assembly process
- Cores cleaned using our Hydro Blast cleaning and rinse process
- All case halves wet sanded to ensure perfect mating surfaces
- Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
- Remanufactured in our ISO9001:2008 USA facility.
- Without Motor
EVO Driveline – Remanufactured Transfer Case (Part No.UMT415-2)
from
$1341.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.
Product Features:
See More
Product Features:
- Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
- OEM cores are processed as individual units throughout the tear down and assembly process
- Cores cleaned using our Hydro Blast cleaning and rinse process
- All case halves wet sanded to ensure perfect mating surfaces
- Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
- Remanufactured in our ISO9001:2008 USA facility.
- Without Motor
Popular 1989 Ford F-250 Pickup Drivetrains Categories
1989 Ford F-250 Pickup Drivetrains
You count on your 1989 Ford F-250 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 615 Drivetrains ranging in price from $1.99 to $1,503.99, you’re sure to find everything you need for your 1989 Ford F-250 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 27 different brands like Moog, National, and DriveWorks. 1989 Ford F-250 Pickup Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 5,377 extensive product reviews on 1989 Ford F-250 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 3.9 stars and Greaseable Premium Universal Joint with 4.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1989 Ford F-250 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1989 Ford F-250 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Ford F-250 Pickup running right for years to come. In our inventory you’ll find brands like Moog, National, DriveWorks, and even more.
Popular Idemitsu Drivetrains
You’ll find popular Idemitsu brand products across Differentials. All are waiting to get your 1989 Ford F-250 Pickup back on the road. Some of the top-rated Idemitsu products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1989 Ford F-250 Pickup, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1989 Ford F-250 Pickup Drivetrains
What are the most purchased Drivetrains for the 1989 Ford F-250 Pickup?
Out of 615 Drivetrains for the 1989 Ford F-250 Pickup, the most popular in our inventory are:
What are the top-rated 1989 Ford F-250 Pickup Drivetrains?
Top-rated Drivetrains for your 1989 Ford F-250 Pickup based on customer reviews/ratings are:
from
$24.99
(30)
Non-Greaseable Super Strength Universal Joint
“Axle shaft U Joint replacement for a 99 XJ. Works great. Nice and strong.”
