Spray Cleaner and Lube (12 oz.)
Hover over the image to zoom in
Share this:

Sea Foam Spray Cleaner and Lube (12 oz.)

Part No. SS14 Warranty Details  
$13.99
Quantity  Add to Cart
Sea FoamĀ® Spray is for internal engine use only to clean carbon deposits from intake systems, intake valves, and combustion chambers of your engine. For internal engine use only; for use in 2- and 4-cycle engines. 100% pure petroleum blend for safe cleaning of air intake systems and all throttle bodies. Safe to use on Teflon-coated parts. Oxygen sensor safe. Lubricates throttle plates and bushings. Sea FoamĀ® Spray's unique spray valve even works with the can held upside down so you can use it in difficult-to-reach applications.

Product Features:
  • Use to store and fog 2-cycle and 4-cycle engines.
  • EPA registered.
  • Helps to clean intake valves and pistons.
  • Helps to clean catalytic converter odors.
  • Helps restore power and pickup.
  • Instructions on how to use Sea Foam Spray are printed on each can.
Back To Top
Synthetic Oil Compatible:Yes

REVIEW SNAPSHOT®

by PowerReviews
Sea FoamSpray Cleaner and Lube (12 oz.)
 
4.4

(based on 36 reviews)

Ratings Distribution

  • 5 Stars

     

    (26)

  • 4 Stars

     

    (4)

  • 3 Stars

     

    (3)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (2)

91%

of respondents would recommend this to a friend.

Pros

  • Easy to use (20)
  • Reliable (10)

Cons

No Cons

Best Uses

  • Home garage (17)
  • Upkeep (13)
  • Automotive repair shop (11)
    • Reviewer Profile:
    • Auto enthusiast (4), Mechanic (4)
    • Was this a gift?:
    • No (5)
    • Reviewer Profile:
    • Auto enthusiast (11), Casual driver (5), Mechanic (5), Truck enthusiast (3)

Most Liked Positive Review

 

Results Guaranteed, Fairly easy to use!

For Application vehicle has to be on and engine warm . .
Better than many other fuel treatments used before!
Results are GrrReat . .
Will use again on other...Read complete review

For Application vehicle has to be on and engine warm . .
Better than many other fuel treatments used before!
Results are GrrReat . .
Will use again on other vehicles.

When used on vehicles with electronic intake valve control you will need someone to assist you in accelerating the vehicle in order to open valve and hold constant RPM . .
Otherwise it is really easy when can open valve from the side like the second photo attached shows. .

VS

Most Liked Negative Review

 

does work

helped car start better after use, but made engine light come on , says keep off maf sensor so i cleaned sensor, then light went off,did help start better

helped car start better after use, but made engine light come on , says keep off maf sensor so i cleaned sensor, then light went off,did help start better

Reviewed by 36 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
3.0

I would purchase something similar

By 

from undisclosed

Verified Buyer

Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

Had trouble emptying the entire can, also had trouble keeping the straw connected to can, but I do love sea-foam products

 
5.0

I use it cause it works

By 

from undisclosed

Verified Buyer

Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

It works

 
5.0

Great cleaning product

By 

from undisclosed

Verified Buyer

Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

Ease to use, great results, money and time savings if used on semi regular maintenance basis.

 
4.0

First time using the spray

By 

from NWOH

See all my reviews

Verified Buyer
3 or more reviews submitted

Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

I've used Seafoam for over a decade now but have never before used the spray. I normally pull a brake booster line or another vacuum line from near the middle of the intake manifold so I can get to all the valves and cylinders. This cost less, but seemed to do just as well.. It might save time on some cars or take longer on others, pulling intake boot vs pulling a vacuum line. It stayed fairly well atomized, which is great and a huge improvement over trying to keep your car running while having it sipping fluid from a cup... It did take nearly 5 minutes to empty the can out. Other than the process of injecting the seafoam to your motor, it's the exact same product, since it's atomized, it almost has to work better and reach more areas.

  • Was this a gift?:
  • No
 
5.0

Worked fine as promised.

By 

from Harrisonburg, VA

Verified Buyer

Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

Used exactly as in YouTube demo. Needs 2 people to do it. Can pressure is not high so the flow is not strong. that's why it took a long time to finish.

  • Was this a gift?:
  • No
 
4.0

Worked very well.

By 

from Roanoke, VA

Verified Buyer

Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

Worked as advertised.

  • Was this a gift?:
  • No

(2 of 2 customers found this review helpful)

 
4.0

appears to work

By 

from vinton, VA

Verified Buyer

Pros

  • Greatly Improved Idle

Cons

  • Not Sure About Heat Sink

Best Uses

    Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

    Before I used this application, I cleaned around and behind the throttle plate really well. This helped with the idle some. Then I used this top end cleaner as instructed on the bottle. It smoked like heck. I think the bottle emptied before 5 minutes, so I'm not sure if I got the full benefit of the heat sink. However, there has been a great improvement on my idle. I even needed to adjust the idle speed down from 1000 rpm to 700rpm. Actually seems to improve the more I drive the truck. This was on a 1994 Toyota 22re motor.

    • Was this a gift?:
    • No

    (1 of 1 customers found this review helpful)

     
    4.0

    Possibley the best .

    By 

    from Walkertown

    Verified Buyer

    Pros

    • Works Great

    Cons

    • None

    Best Uses

    • Keeping Engine Clean

    Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

    Best you can buy for the DIY Products.

    • Was this a gift?:
    • No
     
    5.0

    Easy to use

    By 

    from Atlanta GA.

    About Me Auto Enthusiast

    See all my reviews

    Verified Buyer
    3 or more reviews submitted

    Pros

    • Easy To Use

    Cons

      Best Uses

        Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

        Great cleaner

        (0 of 1 customers found this review helpful)

         
        1.0

        Spray tube always comes off.

        By 

        from undisclosed

        About Me Auto Enthusiast, Do It Your Self Mechanic

        See all my reviews

        3 or more reviews submitted

        Pros

          Cons

          • Difficult To Use
          • Spary Tube Always Comes O

          Best Uses

            Comments about Sea Foam Spray Cleaner and Lube (12 oz.):

            Tried twice and spray tube comes off while using.
            Haven't seen any improvement in gas millage.

            Displaying reviews 1-10

            Back to top

            Previous | Next »

            Do you have questions about this product?

             

            Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

            10 Questions | 13 Answers
            Displaying questions 1-10
            • Q:

              Can you use this to clean the throttle body?
              Asked on 4/9/2017 by Tina Ferrell from Newark Oh

              1 answer

              • CUSTOMER CARE

                A:

                Hi Tina Ferrell, glad to assist you! This Sea Foam Spray Cleaner and Lube (12 oz.) - Part No. SS14 is 100% pure petroleum blend for safe cleaning of air intake systems and all throttle bodies for both two stroke and four stroke gasoline engines, injection or carburetor. It does not have harsh detergent of abrasive chemicals that can harm your engine.

                Answered on 4/11/2017 by Solomon from AAP
            • Q:

              can you use this in a v-8 -5.7,liter or 350 ci
              Asked on 4/17/2016 by jim from piedmont sc

              1 answer

              • CUSTOMER CARE

                A:

                Hi Jim, glad to help you! Sea Foam Spray can be used in any and all makes of 2-stroke and 4-stroke gasoline engines, injection or carburetor. Sea Foam Spray only contains highly-refined petroleum ingredients. It does NOT have harsh detergent of abrasive chemicals that can harm your engine. For more information, I would suggest that you contact the Seafoam directly at (952) 938-4811 and they would be in a better position to help you.

                Answered on 4/18/2016 by Steve from AAP
            • Q:

              What do you do if your vehicle dosent have a tachometer?
              Asked on 5/24/2015 by Hogman77 from Arkansas

              2 answers

              • CUSTOMER CARE

                A:

                Happy to help you with your question Hogman! It shoudlnt matter if your vehicle has a tach on it or not. When using the Seafoam the vehicle may bog down, if you feel you need to rev it just a little revving would suffice. You can also pour less of the additive if the vehicle seems like it will die.

                Answered on 5/25/2015 by Panda from AAP
              • CUSTOMER CARE

                A:

                Happy to help you with your question Hogman! It shoudlnt matter if your vehicle has a tach on it or not. When using the Seafoam the vehicle may bog down, if you feel you need to rev it just a little revving would suffice. You can also pour less of the additive if the vehicle seems like it will die.

                Answered on 5/25/2015 by Panda from AAP
            • Q:

              Is the 30 inch straw for Vortecs sold separately?
              Asked on 1/17/2015 by Drew

              1 answer

              • CUSTOMER CARE

                A:

                Hi Drew! We do not offer the 30 inch straw for Vortecs separately.

                Answered on 1/18/2015 by Solomon
            • Q:

              Can you spray this product in Diesel Intakes by popping off the air cleaner in a boat motor.
              Asked on 9/20/2014 by Scotty

              1 answer

              • CUSTOMER CARE

                A:

                Hi Scotty, glad to assist you! Sea Foam Spray is not recommended for use on Diesel air intakes.

                Answered on 9/22/2014 by Solomon
            • Q:

              can you use to clean carburetor?
              Asked on 2/28/2014 by Carmen from boston,ma

              1 answer

              • CUSTOMER CARE

                A:

                Hi Carmen, good question! This spray is for internal engine use only to clean carbon deposits from intake systems, intake valves, and combustion chambers of your engine. We have an alternate Advance Auto Parts Fuel Injector and Carburetor Cleaner (Part No. A550) which is specially formulated with cleaning agents that use jet fuel as an active ingredient carrier to clean and protect fuel injectors and carburetors by reducing carbon buildup and other harmful deposits that can cause rough idling. URL - http://shop.advanceautoparts.com/p/advance-auto-parts-fuel-injector-and-carburetor-cleaner-a550/7080131-P?searchTerm=carburetor+cleaner

                Answered on 3/2/2014 by Steve from AAP
            • Q:

              help with vapor lock in 88ci S and S motor cycle.
              Asked on 9/4/2013 by retired railroad employe,joe mc. from pittsfield,ma.

              1 answer

              • CUSTOMER CARE

                A:

                The Sea Foam Spray Cleaner and Lube (14 oz.) (Part No. SS14) is for internal engine use only to clean carbon deposits from intake systems, intake valves, and combustion chambers of your engine. Product Features: Use to store and fog 2-cycle and 4-cycle engines. EPA registered. Helps to clean intake valves and pistons. Helps to clean catalytic converter odors. Helps restore power and pickup. Instructions on how to use Sea Foam Spray are printed on each can. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                Answered on 9/4/2013 by Steve from AAP
            • Q:

              HOW DO YOU SPRAY THIS PRODUCT ON A 2005 HYUNADI XG350L?? HOPE YOU CAN HELP ME.
              Asked on 6/4/2011 by JOHNNY from FAYETTEVILLE NC

              1 answer

              • CUSTOMER CARE

                A:

                This is an intake cleaner. You spray it into the intake manifold.

                Answered on 7/4/2011 by Vincent from AAP
            • Q:

              Where exactly do I spray this product on my Escalade? Do I need to wipe this product off after I sprayed it? Thanks.
              Asked on 9/10/2010 by eva from Fredericksburg, Va

              3 answers

              • CUSTOMER CARE

                A:

                You do not spray this on the vehicle. This is an intake cleaner. You spray it into the intake manifold.

                Answered on 9/10/2010 by Kevin from AAP
              • A:

                This spray is to be used in front of the intake valve and inside areas. On the Escalade engine the air intake tube is located on top by the middle of your engine, place the cleaning tube hook guide then replace your air in-take tube . . Check the can or their website graphics on the product . . It is an excellent product . Hope it helps . .

                Answered on 9/21/2010 by Tommy . . Neighborhood Mechanic from Miami, FL
              • VERIFIED BUYER

                A:

                go in through a vacuum line port on the intake manifold. Spray in about 15 second bursts then stop spraying for 30 seconds. You will hear the engine start to bog down. Repeat this about 4 times then shut the engine off and let it sit for 10 minutes. When you start the engine again it will smoke HEAVILY this is normal rev the engine to about 3-4000 rpm for 1 minute. If you can, drive the vehicle and accelerate quickly from a stop 2 or three times.

                Answered on 10/1/2010 by badasscarguy from Springfield MA
            • Q:

              How do you apply this product
              Asked on 7/21/2010 by Tastie from Spring, TX

              1 answer

              • CUSTOMER CARE

                A:

                You put it into the intake manifold. It can be sprayed into the manifold.

                Answered on 7/21/2010 by Kevin from AAP
            Displaying questions 1-10

            Do you have a question about this product? 

            Check out the specials in our monthly flyer.
             
             
            Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.