Permatex Non-Hardening Gasket Sealant for Easy Disassembly & Fluid Resistance, 1.75 oz.

Sticky stuff! I used it lightly on my vacuum hoses that have too much movement and on new lines for my GT40 intake. Just let it fully cure before starting the car up.

I used this on the gasket between the water pump and the engine housing the pump mounted to. I used plastic gloves to protect my fingers from the potent adhesive and tried not to breath it while applying it. I put one coat on the pump and another on the gasket and let it sit for awhile. The instructions say to let it get tacky. Well their 3 hour recommendation was over kill. Up here in Colorado where the humidity is around 10% when the sun is out. After 15 minutes I checked it and nothing would stick to it, even though it was still soft inside the bead of adhesive. I put the gasket together with the pump and put another coat of adhesive on the back of the gasket and in about 5 minutes I bolted the pump and gasket to the engine. I did wait 3 hours before I gave the last 1/4 turn to tightening the bolts against the pump then ran the engine. Not a leak yet and its been about a week now. Don't breath the fumes when applying the adhesive.

Good product

Used this on oil cooler gasket. Worked well so far.

Used to secure driver door insulation panel to door frame. Worked great.