3.5 oz. tube, carded - OEM specified. Permatex Ultra silicones were developed to meet today's technology changes. Sensor-safe, low odor, noncorrosive.

Product Features:

• Outstanding oil resistance and joint movement tolerance
• Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
• Temperature range -65F to 500F (-54C to 260C) intermittent
• Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
• For best results, clean and dry all surfaces with a residue-free solvent such as Permatex Brake and Parts Cleaner.
• Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
• Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
• Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
• Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
• Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
• Allow more time for cold or very dry conditions.
• Clean uncured silicone from hands, tools and clothing with Permatex Fast Orange Wipes or Fast Orange Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET