Choose a Store
- Shop All
- Replacement Parts
- Performance Parts
- Accessories
- Oil & Fluids
- Special Offers
- Advance Rewards
- Advice & How-Tos
- Project Guides
Share
How Would You Like To Get This Item?
Store Pickup
Same Day Home Delivery
Home Delivery
Product Information
Product Details
Part No. BAQ2010
Warranty Details (30 Day Warranty)
Dupli-Color Bed Armor Do-It-Yourself Truck Bed Liner is a water-based, rubberized polyurethane coating. It is ideal for protecting truck beds and a variety of automotive surfaces including all other metal, aluminum, fiberglass, and wood surfaces. BED ARMOR is formulated with ground up rubber particles to provide uniform texture and help prevent your cargo from moving around. This special formulation won't chip, fade, or flake and has a textured, black satin finish that provides the ultimate in truck bed protection.
Product Features:
Product Features:
- Impact Resistant Finish Won't Flake/Chip/Peel
- Durable And Rubberized Finish Extends Bed Life
- Water-Based Polyurethane Coating
- Impact resistant finish won't flake, chip, or peel
- Easy DIY Truck Bed Liner
Specifications
Abrasion Resistant:
Yes
Additional Tools/Materials Required:
Purchase with Bed Armor Kit
Aerosol:
No
Application Method:
Roll-In, Spray-In
Chemical Resistant:
Yes
Color:
Black
Coverage Area Per Container/Kit:
18 sq ft
Fade Resistant:
Yes
Height:
4.88 in
Impact Resistant:
Yes
Installation Kit Included:
No
Instruction Manual Included:
Yes
Liner Type:
Roll-In, Spray-In
Material:
COATING
Universal:
Yes
Width:
4.25 in
3.66 out of 5
193 Customer Reviews
73% of respondents would recommend this to a friend
Ratings Distribution
5 Stars
83
4 Stars
48
3 Stars
13
2 Stars
12
1 Star
37
Pros
55
Easy To Install
50
Durable
28
Attractive
10
Lightweight
4
None
Cons
6
Difficult To Install
4
Unattractive Styling
3
Flimsy Design
3
None
2
No Improvement In Performance
Best Uses
45
Restoration
37
Customizing The Exterior
21
Everyday Driving
5
Replacement
4
Bed protection
Car & Truck
17
Truck Enthusiast
10
Casual Driver
9
Auto Enthusiast
8
Mechanic
2
Competitive Driver
Describe Yourself
26
Truck Enthusiast
25
Auto Enthusiast
14
Casual Driver
14
Mechanic
3
Competitive Driver
Most Liked Positive Review
Worked great
Worked great, prep time is the majority of the work. Roughed up truck bed, used acetone to penatrate the paint before applying. First coat was looking painted on, I applied the second coat thick and in swirles, that made all the difference in appearence. Does not look painted in at all. Required a lot of stirring and breaking up the mixture prior to application. Taped bed and removed tailgate. End Results were great. Very pleased.
Most Liked Negative Review
Overall good product. Thickness subpar
Overall a good product.Do not use the supplied scouring pad. Use medium to fine grit sanding sponge from [@]($3.50 for a long sponge) will work a lot easier. Use 91% alcohol($3 at [@]) to wipe down the area after sanding. Product looks good when applied with the brush using long brush strokes to hide the brush stroke markings. I do not reccomend using the roller as it is pretty much useless in the bed of a truck with ridges. It's kind of like chunks of Berber carpet attached to a roller. I purchased a textured roller and a sponge roller and neither worked well. Just use the brush. Product is superthin even after 3 coats and tends to shrink inward when drying. It says to wait 48 hours before use. Wait at least 60-72 hours, I loaded a PVC pipe made bike rack with end caps in the bed of the truck and it scraped the material up in a few spots and I had to recoat it. Buy online and use the P20 code to get 20% off ;)
Reviewed by 193 Customers
good stuff
Staff Reviewer -
used it to protect /restore the bed on my golf /service cart
Bottom Line Yes, I would recommend to a friend
Best product I've used.
Staff Reviewer -
This is by far the best DIY bed liner material I've used so far. I'm in and out of my vehicle all the time: mud, sand, water, etc. and it takes the beating all of my Marines can give it. Definitely better than the Herculiner and others. Goes on much easier, very consistent, and doesn't dry out like other brands. If you want a little more texture, you can add fine sand to it and it goes on just the same! Definitely a MUST BUY if you're going to do this yourself!
Bottom Line Yes, I would recommend to a friend
Works alot better than expected.
I used it on a 1968 Lincoln trunk,it had alot of rust and pitted spots throughout..I brushed it on instead of rolling it on,it went on thicker but only covered the floor of the trunk,so i may have to grab a gallon next time to do the interior,under carpets and fender area..
I prepared the area with a wire brush on a drill,and used fiberglass long strand hair to fill in rust holes.It covered the area great,and seemed to also fill in the dents caused by years of rust.
I like the fact it went on smoothly,unlike other products i seen that had grit,or a bumpy texture.
The smoother texture looks great and almost made the trunk look like new.
I hadnt seen any Cons about this product yet,I will get a gallon next time and finish the trunk and floor of the car.
Bottom Line Yes, I would recommend to a friend
Overall good product. Thickness subpar
Staff Reviewer -
Overall a good product.Do not use the supplied scouring pad. Use medium to fine grit sanding sponge from [@]($3.50 for a long sponge) will work a lot easier. Use 91% alcohol($3 at [@]) to wipe down the area after sanding. Product looks good when applied with the brush using long brush strokes to hide the brush stroke markings. I do not reccomend using the roller as it is pretty much useless in the bed of a truck with ridges. It's kind of like chunks of Berber carpet attached to a roller. I purchased a textured roller and a sponge roller and neither worked well. Just use the brush. Product is superthin even after 3 coats and tends to shrink inward when drying. It says to wait 48 hours before use. Wait at least 60-72 hours, I loaded a PVC pipe made bike rack with end caps in the bed of the truck and it scraped the material up in a few spots and I had to recoat it. Buy online and use the P20 code to get 20% off ;)
Bottom Line Yes, I would recommend to a friend
Good, but could be better
Staff Reviewer -
Good for undercoating, hard to apply in light even coats like the instructions state..
Bottom Line Yes, I would recommend to a friend
Displaying Reviews 1 - 5Back to Top
No results
Feedback
Be The First To Know About Deals And Promotions.
Plus, create an account to receive $5 off of $20 or more.
TOP REPLACEMENT PARTS
ROUTINE MAINTENANCE PARTS
CUSTOMER SUPPORT
ABOUT US
PROFESSIONAL SHOPS