Drum Brake Wheel Cylinder
Hover over the image to zoom in
Drum Brake Wheel Cylinder Drum Brake Wheel Cylinder
Share this:

Carquest Wearever Drum Brake Wheel Cylinder

Part No. WCA37663 Warranty Details  
$11.79
Quantity  Add to Cart

See if this part fits a specific vehicle.

Check Vehicle Fit

Direct replacement Wheel Cylinders are designed to fit specific vehicle applications and to ensure a proper fit every time. Normal wear may cause piston seals to leak. Corrosion and pitting can also occur inside Wheel Cylinders as moisture builds up in the brake fluid. A leaky Wheel Cylinder can be dangerous to the driver, causing gradual softening of the brake pedal and creating brake pull to one side.

Product Features:
  • All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
  • Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
  • Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
  • Recommended replacement is suggested when servicing drum brake
Back To Top
Bleeder Screw Cap Included:No
Bleeder Screw Included:Yes
Bore Diameter:13/16 in
Casting Material:Cast Iron

REVIEW SNAPSHOT®

by PowerReviews
Carquest WeareverDrum Brake Wheel Cylinder
 
3.3

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

Reviewed by 4 customers

Displaying reviews 1-4

Back to top

 
5.0

Worked fine, exact replacement!

By 

from melbourne, fl

Verified Buyer

Pros

  • Easy To Install

Cons

    Best Uses

    • Everyday Driving
    • Replacement

    Comments about Carquest Wearever Drum Brake Wheel Cylinder:

    I love advanced, friendly helpful people that help me get in and out quickly!

    • Car & Truck:
    • Auto Enthusiast, Casual Driver, Competitive Driver, Mechanic, Truck Enthusiast
     
    4.0

    So far I can stop without lossing all my

    By 

    from northern ky

    Verified Buyer

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Replacement

      Comments about Carquest Wearever Drum Brake Wheel Cylinder:

      This product allows me to stop with out losing all my brake fluid. it was easy to instal.

      • Car & Truck:
      • Casual Driver
       
      3.0

      Good Part

      By 

      from undisclosed

      See all my reviews

      Verified Buyer
      3 or more reviews submitted

      Comments about Carquest Wearever Drum Brake Wheel Cylinder:

      So far so good.

       
      1.0

      Does not fit 1989 ford ranger!

      By 

      from NJ

      Comments about Carquest Wearever Drum Brake Wheel Cylinder:

      Took the entire drum apart to replace wheel cylinder only to find the bolt holes do not line up and it was too big to even fit where it goes. I then had to put the entire drum back together with a leaking wheel cylinder just to drive to the store to see if the other one they sell fits. Biggest waste of time.

      Displaying reviews 1-4

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      4 Questions | 4 Answers
      Displaying questions 1-4
      • Q:

        I've been cleaning the garage and I found a brand new wheel cylinder #W37663. I want to ID it so I might use it the next time the specific vehicle comes in. Thanks
        Asked on 2/16/2012 by Chief from Winchester, NH

        1 answer

        • CUSTOMER CARE

          A:

          The specification of this part Tru-Torque Drum Brake Wheel Cylinder, Part No. W37663 manufactured by Tru-Torque are: Bore Size: 13/16", Inlet Thread Size: 7/16-24, Material: Cast Iron.
          For compatibility of this part with your vehicle, please provide your vehicle make, model and engine specification.

          Answered on 2/17/2012 by Aaron from AAP
      • Q:

        these are listed as for the left rear.are these for the right side as well?
        Asked on 12/26/2011 by Anonymous

        1 answer

        • CUSTOMER CARE

          A:

          This Tru-Torque Drum Brake Wheel Cylinder is for rear and it can be used for either rear driver side or passenger side.

          Answered on 12/26/2011 by Steve from AAP
      • Q:

        its a 1990 ford ranger with 2.9l v6
        Asked on 2/1/2011 by Anonymous

        1 answer

        • CUSTOMER CARE

          A:

          Yes, this part fits your 1990 Ford Ranger.

          Answered on 2/1/2011 by David the Dynamite Parts Guy from AAP
      • Q:

        does this product fit on the front brakes of my ford ranger or back
        Asked on 2/1/2011 by donovan from waterloo,SC

        1 answer

        • CUSTOMER CARE

          A:

          This product fits only on the rear brakes.

          Answered on 2/1/2011 by David the Dynamite Parts Guy from AAP
      Displaying questions 1-4

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.