Volkswagen Jetta Drivetrains
Top Volkswagen Jetta Drivetrains Categories
We carry over 176 Drivetrains in inventory for the Volkswagen Jetta. If you’re looking for aftermarket Drivetrains for your Volkswagen Jetta, check out all these categories:
Essential Volkswagen Jetta Drivetrains
Febi – Drive Flange Cap (Part No.J800352306FEB)
from
$3.68
Drive Flange Cap
National – Bearings (Part No.206-FF)
from
$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Rein – Control Arm Bushing (Part No.AVB0561)
from
$17.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
- Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.
Elring – Gasket Maker (Part No.3K2003361623ELR)
from
$12.47
Gasket Maker
Dorman – Spindle Retainer M16-1.0 Hex Size 24mm (sold by each) (Part No.615-083)
from
$2.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Febi – Axle Shaft Nut (Part No.K4030229650FEB)
from
$8.61
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Original Equipment – Axle Shaft Bearing Carrier (Part No.K4045163351OEA)
from
$470.88
The Original Equipment Axle Shaft Bearing Carrier is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Help – C.V. Joint Bolted Split Boot Hardware (Part No.03634)
from
$2.49
Our CV Joint Boot Hardware Kit includes everything needed for a complete repair of the Speedi-Boot or other bolted split boots. All screws and nuts are provided.
Product Features:
See More
Product Features:
- Will fit most bolted split boots
- Durable steel construction
- Bolts also come with Speedi-Boot Kits
- Easy to install
Febi – Hub Mounting Bolt (Part No.K7036444473FEB)
from
$3.52
Hub Mounting Bolt
Meyle – Wheel Hub (Part No.K700028254MEY)
from
$55.73
Meyle manufactures wheel hub assemblies that provide high performance and durability.
Product Features:
See More
Product Features:
- OE Quality
- High quality steel and surface finishes
Febi – CV Boot Clamp (Part No.K603015050FEB)
from
$3.71
CV Boot Clamp
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV72101)
from
$131.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Beck/Arnley – Axle Nuts (Part No.103-0507)
from
$5.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with premium grade materials
- Quality construction for durability
- Designed for under vehicle environment
- Application specific for this vehicle
National – Shaft Repair Sleeve (Part No.99157)
from
$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Rein – CV Boot Kit (Part No.BKN0028R)
from
$23.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
Vaico – Stub Axle (Part No.K500019585VCO)
from
$41.85
The Vaico Stub Axle is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Driveworks – Ball Bearing (Part No.S-206-FF)
Dorman – Torque To Yield Axle Bolts; 24 mm Hex Size, 134 mm Length, 16 mm Thread Diameter, 2 Pack (Part No.615-006)
from
$14.29
This axle bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GKN Drivetech – CV Joint Kit (Part No.K6000324804LOB)
from
$156.02
SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
Febi – CV Joint Bolt (Part No.K6050439247FEB)
from
$2.08
The Febi CV Joint Bolt is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Corteco – Manual Trans. Seal (Part No.J115025492CFW)
from
$6.23
Manual Trans. Seal
Dorman – Axle Support Bushing (Part No.523-239)
from
$51.99
Suspension feeling loose or making noise? This axle bushing kit restores performance and handling lost due to age and deterioration of the original bushings. Bonded steel and rubber construction for reliable service life.
Product Features:
See More
Product Features:
- Direct replacement – this axle bushing kit is an exact replacement of the original components for a perfect fit
- Durable construction – bonded steel and rubber for predictable handling and performance
- Complete kit – includes both bushings and new mounting hardware
- Quality assured – part has undergone fitment testing to ensure proper fit and function
Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-29710)
from
$7.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Volkswagen Jetta Drivetrains Categories
Helping You Find the Right Drivetrains for Your Volkswagen Jetta
You love your Jetta. So we’ve made it easier than ever to help you find Volkswagen Jetta Drivetrains in our online catalog. Our inventory holds 176 aftermarket and OEM Drivetrains for your Volkswagen Jetta, ranging from $1.82 to $529.71.
We offer parts from 27 brands trusted to make quality Drivetrains for your Volkswagen Jetta. Before you buy, take some time to read through customer reviews. We currently have 31,665 reviews of Volkswagen Jetta Drivetrains from previous customers. Some of the top rated parts include C.V. Joint Solvent Welded Split Boot Kit Outer with 2.5 stars and Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter with 3.4 stars.
Find your Jetta Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Volkswagen Jetta part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Volkswagen Jetta
Our inventory holds Drivetrains for your Volkswagen Jetta from 27 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Idemitsu, and Dorman, all of which can keep that Volkswagen happy.
We have Driveworks parts available for your Volkswagen Jetta in categories like Transfer Cases. Some of the top-rated Driveworks parts in these categories are:
Top-Rated Carquest Premium Drivetrains
Leading Carquest Premium Drivetrains
We carry Carquest Premium brand parts for your Volkswagen Jetta across several catalog categories, including Drive Shafts and Axles. Some of our most reviewed Carquest Premium parts include:
FAQs for Volkswagen Jetta Drivetrains
What are the most purchased Drivetrains for the Volkswagen Jetta?
Out of 176 Drivetrains for the Volkswagen Jetta, the most popular in our inventory are:
What are the top-rated Volkswagen Jetta Drivetrains?
Top-rated Drivetrains for your Volkswagen Jetta based on customer reviews/ratings are:
from
$21.99
(88)
C.V. Joint Solvent Welded Split Boot Kit Outer
“This kit was easily installed and solved my problem”
from
$29.49
(36)
Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
“100% recommended, very good attention, it was my first time shopping online in the store, without delay and any problem.
Thank you.”
from
$126.99
(12)
CV Axle Shaft Assembly
“2006 VW Passat Special Edition fit was perfect! Couldn’t be happier”
