from

$1.82

SPIDAN and LOBRO Clamps are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the clamp.

Product Features:

For every specific application a boot kit to the OES standard
Reliable protection against damp and dirt
Optimum sealing and abrasion resistance
Manufactured according to DIN EN ISO 9001:2000

from

$30.99

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.

Product Features:

Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
Comes with the OE grease
Boot manufactured with highest quality materials to prevent cracking, wear and leaking
Matches Original Equipment design specifications

from

$113.69

For over a decade, Metelli has been a world leading manufacturer of constant velocity joints. The designers develop components using materials and defining treatments (thermal and surface) to ensure that Metelli’s products provide performance even higher than their corresponding original components. Metelli supplies C.V. joints as kits with accessory material including axle boot, grease and mounting hardware.

Product Features:

Highly resilient axle boot
Induction-hardened rolling body raceways
Precision-honed serration

from

$12.79

Product Features:

High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$11.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.06

The Febi CV Joint Bolt is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$9.29

Always replace when installing new bearings. Premium-grade materials for long life and durability. Direct OE replacement.

from

$41.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$3.68

Drive Flange Cap

from

$8.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

from

$7.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.79

Our Spindle Nut Washers are coated for high corrosion resistance and a long service life. Depending on the application, they are also available in a kit that includes the nut, washer, and retainer.

Product Features:

Direct replacement for a proper fit every time
Conveniently available in packs of different quantities
Durable steel construction
Dorman’s Spindle Nut Washers are designed and constructed to strict engineering quality standards

from

$4.99

This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$59.16

SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:

Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
100% tested to the actual OE specifications per part number for fit, form and function
High quality steel and surface finishes
Proper implementation of heat treatment

from

$22.66

With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.

Product Features:

For every specific application a boot kit to the OES standard
Reliable protection against damp and dirt
Optimum sealing and abrasion resistance
Manufactured according to DIN EN ISO 9001:2000

from

$29.65

With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.

Product Features:

For every specific application a boot kit to the OES standard
Reliable protection against damp and dirt
Optimum sealing and abrasion resistance
Manufactured according to DIN EN ISO 9001:2000

from

$12.16

Input Shaft Bearing

from

$22.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$90.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$65.32

The FEQ Axle Assembly is assembled with 100% new components and features neoprene boots, high temp moly-grease and new clips and retainers.

Product Features:

OE-Equivalent and a Direct fit Replacement
Utilizes OE style crimp boot clamps
Provides exceptional reliability
100% new OE replacement
Uses top quality Neoprene boots

from

$86.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$2.29

This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$20.29

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing