Suzuki Reno Wheels and Tires
Top Suzuki Reno Wheels and Tires Categories
We carry over 84 Wheels and Tires in inventory for the Suzuki Reno. If you’re looking for aftermarket Wheels and Tires for your Suzuki Reno, check out all these categories:
Essential Suzuki Reno Wheels and Tires
Driveworks – Wheel Hub (Part No.930-012)
from
$98.99
Tough One Wheel Hubs are designed to meet or exceed original equipment (OE) standards in form, fit and function. These wheel hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Tough One Wheel Hubs. Wheel Hubs come with wheel studs, bearings are not included.
Product Features:
See More
Product Features:
- Brand may vary by location
Xtra Seal – TPMS Rubber Snap-in Valve for GM with Chromed Sleeve (Part No.17-20008C)
from
$7.99
TPMS Rubber Snap-in Valve for GM with Chromed Sleeve
McGard – Chrome Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64002)
from
$24.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
REDI-Sensor – TPMS Service Kit, REDI-Sensor and OE Style (Part No.SE54190)
from
$4.49
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Electroless nickel-plated valve cores
- Advanced anodization of valve stems and hex nuts
- Includes torque specifications and installation instructions
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Chrome SplineDrive 4 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65457CN)
from
$134.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 12 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, & 1 Key
- Clamshell packaging.
McGard – Black Tuner Style Cone Seat Wheel Lock Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.25357)
from
$71.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- For use on “Tuner” wheels or wheels with very small lug nut holes.
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
REDI-Sensor – REDI-Sensor Metal Clamp-in Stem 315 MHz — 1 Sensor (Part No.SE10007)
from
$53.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Metal clamp-in stem.
- Works with most major TPMS Scan tools
- Reduces SKUs
- OE Designed and Validated
- Advance anodization of valve stems and hex nuts
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-510052)
from
$41.99
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
INA – Wheel Bearing (Part No.K800060867INA)
from
$53.90
INA wheel bearings are engineered and manufactured to the highest quality standards.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Premium modified bearing steel
Driveworks – Wheel Bearing and Hub Assembly: 4 Studs (Part No.NT512317)
from
$78.99
WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.
Product Features:
See More
Product Features:
- Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
- WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
- Reinforced seal design material allows for optimal performance in harsh environments.
- WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
- Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
- Brand may vary by location
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.512317)
from
$128.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
- Application specific design
Schrader – TPMS Sensor Service Kit (Part No.20018)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)
from
$7321.99
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)
from
$42.99
Professional installation is strongly suggested
Product Features:
See More
Product Features:
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)
from
$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
- DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Rugged Ridge – Wheel Spacer Kit (Part No.15201.13)
from
$211.99
Need to move your wheels out for a little extra space? This pair of black 1-inch thick forged aluminum wheel spacers from Rugged Ridge have a 5 x 5.5-inch bolt pattern, 108mm center bore, and M12 x 1.25mm wheel studs. They are designed for 86-05 Suzuki mo
Product Features:
See More
Product Features:
- Black
- Aluminum
- 1 in.
- Pair
- Limited 5 Year Warranty
Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)
from
$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.
Product Features:
See More
Product Features:
- MX-Sensor Components
- 4 Metal Valves
- 4 Rubber Valves
- Rubber Gasket (2×10 pcs)
- Screw Nut (2×10 pcs)
- Washer (2×10 pcs)
- Metal Valve Cap (2X10 pcs)
- Rubber Valve Cap (2X10 pcs)
- Valve Core (2X10 pcs)
McGard – Gold SplineDrive Lug Nuts (M12 x 1.25 Thread Size) – Box of 50 Lug Nuts (Part No.65003GD)
from
$399.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with gold PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Requires 65100 Or 65300 Installation Tool sold separately
McGard – SplineDrive Lug Nut Installation Tool for McGard SplineDrive Lug Nuts (Part No.65100)
from
$94.99
SplineDrive Installation tool for use only with McGard SplineDrive lug nuts with a 1/2-20, M12x1.25 or M12x1.5 thread size. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- For use only with McGard SplineDrive lug nuts with a 1/2-20, M12x1.25 or M12x1.5 thread size.
- Installation Tool has 13/16″ Hex Size
- Bulk Box of 10 Installation Tools
McGard – Chrome Bulge Cone Seat Style Lug Nut Set (M12 x 1.25 Thread Size) – Set of 4 Lug Nuts (Part No.64013)
from
$24.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
McGard – Gold SplineDrive 4 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65457GDC)
from
$174.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Set of 12 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, & 1 Key
- Clamshell packaging.
Driveworks – Wheel Seal (Part No.S-224200)
Suzuki Reno Wheels and Tires Categories
Helping You Find the Right Wheels and Tires for Your Suzuki Reno
You love your Reno. So we’ve made it easier than ever to help you find Suzuki Reno Wheels and Tires in our online catalog. Our inventory holds 84 aftermarket and OEM Wheels and Tires for your Suzuki Reno, ranging from $2.99 to $7,321.99.
We offer parts from 15 brands trusted to make quality Wheels and Tires for your Suzuki Reno. Before you buy, take some time to read through customer reviews. We currently have 901 reviews of Suzuki Reno Wheels and Tires from previous customers. Some of the top rated parts include VDO Rubber Snap-in Stem REDI-Sensor with 4.8 stars and Snap-In TPMS Service Kit: Rubber, 0.453 Inch Stem with 4.8 stars.
Find your Reno Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Suzuki Reno part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Wheels and Tires Brands for Your Suzuki Reno
Our inventory holds Wheels and Tires for your Suzuki Reno from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like Autel, Schrader, and McGard, all of which can keep that Suzuki happy.
We have National parts available for your Suzuki Reno in categories like Wheel Bearings. Some of the top-rated National parts in these categories are:
Top-Rated Schrader Wheels and Tires
Leading Schrader Wheels and Tires
We carry Schrader brand parts for your Suzuki Reno across several catalog categories, including TPMS Sensors. Some of our most reviewed Schrader parts include:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for Suzuki Reno Wheels and Tires
What are the most purchased Wheels and Tires for the Suzuki Reno?
Out of 84 Wheels and Tires for the Suzuki Reno, the most popular in our inventory are:
from
$24.99
(5)
Chrome Cone Seat Style Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts
Custom Wheel Lug nuts
What are the top-rated Suzuki Reno Wheels and Tires?
Top-rated Wheels and Tires for your Suzuki Reno based on customer reviews/ratings are:
from
$49.99
(26)
VDO Rubber Snap-in Stem REDI-Sensor
“Good quality and price for this Tire Pressure Monitoring Sensor.”
from
$4.49
(6)
Snap-In TPMS Service Kit: Rubber, 0.453 Inch Stem
“Decent price, good quality, no problems”
