Oldsmobile Intrigue Ignition and Tune-Up Products

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

These ACCEL 8.8mm wires feature a carbon/graphite core that virtually eliminate RFI noise while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:

• 500 Ohms/ft Of Resistance
• 550 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• Custom-fit Universal And Import Coverage
• Pre And Post HEI Vehicles
• Magnetic Suppression
• Fiberglass/Kevlar Core
• 500 Ohms Resistance

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

• PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
• BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
• STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
• CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

• Direct-fit OE replacement ensures ease of installation
• Designed to meet OE performance
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
• Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

• PREMIUM GRADE SILICONE: Designed to withstand harsh environments
• OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

ACDelco GM Original Equipment Ignition Control Module Connector is a GM-recommended replacement and will provide the same performance, durability, and service life as your factory original equipment.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

An ACDelco GM Original Equipment Ignition Knock (Detonation) Sensor monitors the engine for pinging or spark knock, and is a GM-recommended replacement for your vehicle’s original component. The sensor creates a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses this signal to adjust the ignition timing and air/fuel mixture. This original equipment ignition knock sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Undergo the same stringent testing process as the original part
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

• Provides excellent heat resistance as well as maximum protection against spark loss.
• Durable silicone compound for resistance to high heat or abrasion
• Spring included with the coil boot
• Design for direct compatibility
• OE design provides an exact fit for your application
• Multipack provides one time replace all COP for better deal

Get the GM quality you know and trust with ACDelco GM Original Equipment Wires and Cables products. Stay with the brand of parts your vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Wires and Cables are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle. Built to exacting specifications, and extensively tested, ACDelco Auto Wires and Auto Cables includes our Original Equipment line for GM vehicles and a select offering of premium aftermarket Professional products for GM and non-GM vehicles. ACDelco Wires and Cables include high-quality spark plug wire sets, battery cables, pigtail connectors, lamp sockets and trailer connectors. An ACDelco GM Original Equipment Spark Plug Connector provides strong mechanical and electrical connections to the spark plugs and coils. They are the GM recommended an exact replacement for your GM vehicle’s original components. These original equipment spark plug connector is manufactured to fit your specific GM vehicle and provide the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings which guard against even the toughest conditions
• Wires are color coded correctly for easy installation
• The same part as your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Designed with GM Original Equipment specification for fit, form, and function Signs you might need to replace one of your vehicle’s connectors are:
• Breaks or cracks in the insulation jacket or outer coating of the wires causing corrosion of the core.
• Insulation jacket is stiff or contaminated with dirt and oil.
• Broken or spliced wires or wire core.
• Voltage drop or loss. Terminal Installation:
• Align the terminal and pull the wire from the back of the connector in order to seat the terminal.
• If necessary, cut the new wire to proper length and splice with existing circuit.
• If the connector is outside of the passenger compartment, apply dielectric grease to the connector.
• Install the TPA, CPA and/or the secondary locks.

Ignition Wire Holder

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:

• 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
• 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
• DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
• DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
• Durability of an OE style plug combined with Power & Torque of high performance.
• Withstands temperatures greater than 4000┬░ Fahrenheit
• Iridium TT
• Advanced Twin-Tip Technology: Combines a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for superior ignition and efficiency.
• Enhanced Fuel Economy and Lower Emissions: Designed to provide better fuel economy and reduced emissions, allowing you to drive around the Earth over 4 times.
• Original Equipment Specification: Developed from the Super Ignition Plug (SIP) design, ensuring reliable and consistent performance.

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

• Copper cored center electrode for higher thermal conductivity
• Specially engineered high nickel alloy center and ground electrode for extended life
• High alumina ceramic for high dielectric strength
• Leak proof, heat fused internal seal for durability
• Multi-rib insulator prevents flash-over

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

• SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
• PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
• TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
• Improved Fuel Efficiency: Designed to offer better fuel efficiency, the NGK G-Power Platinum spark plugs help you save on fuel costs.
• Lower Emissions: These spark plugs contribute to lower emissions, making them an environmentally friendly choice.
• Faster Starts and Quicker Acceleration: Experience faster starts and quicker acceleration with the advanced design of the NGK G-Power Platinum spark plugs.

CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:

• CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
• CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
• CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.

GM Genuine Parts Ignition Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They increase voltage in order for the spark plugs to ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. A GM Genuine Parts Ignition Control Module features electronically welded lead connections to help reduce heat stress, failure, or cold joints. It has been laser trimmed to provide precise values and reduce deterioration and damage. This ignition control module includes a copper slug heat sink to help dissipate heat and create a more stable environment and it also features a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Feature electronically welded lead connections to reduce heat stress failure or cold joints
• Laser trimmed to provide precise values and reduce deterioration and damage
• Increase voltage in order for the spark plugs to ignite the air/fuel mixture
• Include a copper slug heat sink to help dissipate heat and create a more stable environment
• Equipped with a large bus bar for added support and conductivity to address the installation and operating forces that stress terminal tabs
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

This replacement ignition switch is a direct replacement for a damaged or worn-out original equipment switch Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:

• Ideal replacement – this ignition switch matches the fit and function of the original equipment switch to restore proper operation to the ignition circuit
• Durable construction – this ignition switch is made of quality materials to ensure reliable performance and a long service life
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

GM Genuine Parts Ignition Starter are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It is a multi-position switch that activates the ignition, accessory, and cranking circuits in your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Work with vehicle electronics to help optimize vehicle capabilities
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Copper alloy conductors ensure superior electrical conductivity with low resistive losses
• Our parts are 100% tested to verify both mechanical and electrical switching performance
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product