Mercury Monterey Performance and Racing Products

Essential Mercury Monterey Performance and Racing Products

Mr. Gasket – Waterpmpply (Part No.8829)

Waterpmpply

from

$64.99
Replace your stock black engine pulleys with chrome plated steel pulleys from Mr. Gasket.

Product Features:
  • Triple Groove
  • Chrome Plated
  • Diameter: 5.90″
See More

Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-289-20)

Keith Dorton Series; VoluMax Race Series Fuel Pump

from

$217.99
Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated

Product Features:
  • High Output Fuel Flow
  • Flows 170+ gph Free Flow
  • Shutoff Pressure Pre-Set At 8 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
See More

Accel – Contact And Condenser Kit (Part No.8203)

Contact And Condenser Kit

from

$79.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.

Product Features:
  • High Performance Points and Condenser
  • With Integral Conductor
See More

Mr. Gasket – Timing Cover Gasket Set (Part No.793G)

Timing Cover Gasket Set

from

$20.99
Mr. Gasket Performance Timing Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2321)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$57.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Motive Gear – Differential Carrier (Part No.D3TZ4204A)

Differential Carrier

from

$226.99


Product Features:
  • FORD 9″ EMPTY POSI CASE – 28 & 31 SPLINES
See More

Hurst – Manual Shifter, Indy, SSA 3 Speed Shifter (Part No.5010002)

Manual Shifter, Indy, SSA 3 Speed Shifter

from

$369.99
Hurst Indy SSA 3-speed shifter kits are designed to be used on most popular 3-speed transmissions in a wide variety of cars. Applications are determined by transmissions and an exclusive engineered mounting design, for most applications.

Product Features:
  • Spring Loaded Gate
  • Short Precise Throws
  • Chrome Plated Stick
  • All Components Are Plated
  • Complete with Shifter Boot and Hardware
See More

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Super Stock Replacement Coil for Improved Performance, Starting, and Power

from

$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

Edelbrock – VALVE COVERS (Part No.4260)

VALVE COVERS

from

$144.99
Product Features:
  • Polished Finish
  • Raised Fins w/Black Mat Background
  • Detailed With Allen Hex Heads
  • 2 Piece Look; 1 Piece Construction
  • Clears Most Roller Rockers
  • Clears Valvetrain Components
  • Heavy Gauge
See More

Mr. Gasket – Super Intake Manifold Bolts (Part No.6082)

Super Intake Manifold Bolts

from

$43.99
Super Intake Manifold Bolts

B & M – Shift Improver Kit (Part No.50262)

Shift Improver Kit

from

$72.99
Shift Improver Kit – 1970 to 1982 Ford, Lincoln, Mercury C4 Application: 1970 to 1982 Ford, Lincoln, Mercury C4 Recalibrate your automatic transmission for optimum performance and extended life! Select the mode that best suits your application Provides crisp shifts on any stock automatic transmission Eliminates shift overlap and excess wear on clutches and bands due to slippage The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Ask the thousands of satisfied customers that have installed one in their transmissions! STAGE 1. HEAVY DUTY Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. STAGE 2. STREET/STRIP Provides positive shifts for high performance street use or for competitive events. This level is for the enthusiast who wants the hardest, quickest possible shift.

Product Features:
  • Provides Crisp Shifts
  • On Any Stock Automatic Transmission
  • Eliminates Soft/Sluggish Shift
  • Eliminates Shift Overlap
  • Eliminate Clutch and Band Wear
  • Improves Transmission Life
  • Transmission Removal Not Required
See More

Spectre – Oil Pan (Part No.5490)

Oil Pan

from

$196.99
Spectre’s Chrome Oil Pans feature a front sump and triple chrome plating. This product is designed to fit Ford passenger cars and 2 wheel drive trucks with 351C, 351M, and 400 engines. This OEM replacement oil pan is manufactured using high quality materials and is engineered for optimum fit and function.

Product Features:
  • Triple chrome-plated
  • Steel construction
  • Front sump
  • OEM replacement.
See More

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3755401)

Unilite Electronic Ignition Distributor Series 37

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1614)

Engine Valve Cover Gasket Set

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More

Accel – Universal Fit Graphite Suppression; Spark Plug Wire Set (Part No.8026)

Universal Fit Graphite Suppression; Spark Plug Wire Set

from

$128.99
These ACCEL carbon and graphite core wire sets virtually eliminate RFI noise, while providing maximum conductivity for ultimate performance in any race or street application. Double silicon insulation eliminates leakage and misfire.

Product Features:
  • Heavy Duty 8.8mm Oversized Silicone Jacket
  • 500 Ohms/ft. Of Resistance
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

Energy Suspension – Control Arm Bushing Set (Part No.4.3102G)

Control Arm Bushing Set

from

$16.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Edelbrock – Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.1825)

Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$427.99
The Edelbrock 1825 Thunder Series AVS 650 CFM manual choke carburetor has been designed and calibrated to deliver optimum off-road performance. Several characteristics make the 1825 Thunder Series AVS 650 CFM manual choke carburetor an outstanding street

Product Features:
  • Spring Loaded Needles/Seat Increase Performance
  • New Qwik-Tune Adjustable Secondary Air Valve
  • Distinctive Black Accented Hardware
  • Lightweight Ball-Burnished Aluminum
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
See More

Edelbrock – Pushrod Set for Ford 351W (Part No.9659)

Pushrod Set for Ford 351W

from

$190.99
Edelbrock part #9659 Pushrods are designed for small-block Ford 351W V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise f

Product Features:
  • 7.7 in. Length
  • 0.312 in. Diameter
  • 4130 Chromoly Steel Material
  • Black Oxide Finish
  • Made In The USA
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2948)

Engine Crankshaft Seal Kit

from

$49.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5930)

Ultra Seal: Exhaust Gasket Set

from

$37.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Withstands Intense Exhaust Heat
  • Graphite-Impregnated Facing
  • Steel Expanded Metal Core
  • Superior Tensile Strength
  • Resists Deteriorating
  • Anti-stick Properties
  • Easy Removal For Disassembly
See More

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

VALVE SEALS, TEFLON 3/8" 1 ST

from

$31.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:
  • Work with .530″ guides and 3/8″ valve stem diameter
  • Valve stem oil seals keep unwanted oil from entering the combustion chamber
  • Several different types of valve seals are offered
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1247)

Lower Intake Manifold Gasket Set: 5 Piece Set

from

$46.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
  • Medium riser
  • Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
  • Not intended for use in emission controlled vehicles.
See More

Spectre – Water Neck; Ford 429-460 (Part No.4734)

Water Neck; Ford 429-460

from

$54.99
Spectre’s Ford V8 water neck fits Ford 429 – 460 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes sealing O-ring, and has a 3/8 inch NPT threaded hole for the Ford temp sensor.

Product Features:
  • Fits Ford 429 – 460 engines
  • Has a 3/8 inch NPT threaded hole for temperature sensor
  • Includes sealing O-ring
  • Chrome plated
  • Easy to install
  • Hardware not included
See More

Edelbrock – Performer 400 Intake Manifold for 1971-82 Ford 351/M400 (Part No.2171)

Performer 400 Intake Manifold for 1971-82 Ford 351/M400

from

$421.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Mercury Monterey Performance and Racing Products Categories

Helping You Find the Right Performance and Racing Products for Your Mercury Monterey

You love your Monterey. So we’ve made it easier than ever to help you find Mercury Monterey Performance and Racing Products in our online catalog. Our inventory holds 161 aftermarket and OEM Performance and Racing Products for your Mercury Monterey, ranging from $13.29 to $875.99.

We offer parts from 19 brands trusted to make quality Performance and Racing Products for your Mercury Monterey. Before you buy, take some time to read through customer reviews. We currently have 16,362 reviews of Mercury Monterey Performance and Racing Products from previous customers. Some of the top rated parts include VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT with 4.1 stars and Water Neck with 3.8 stars.

Find your Monterey Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercury Monterey part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Mercury Monterey

Our inventory holds Performance and Racing Products for your Mercury Monterey from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like Accel, Mr. Gasket, and Edelbrock, all of which can keep that Mercury happy.

Top-Rated Edelbrock Performance and Racing Products

Leading Edelbrock Performance and Racing Products

We carry Edelbrock brand parts for your Mercury Monterey across several catalog categories, including Performance Fuel Systems. Some of our most reviewed Edelbrock parts include:

FAQs for Mercury Monterey Performance and Racing Products

What are the most purchased Performance and Racing Products for the Mercury Monterey?

Out of 161 Performance and Racing Products for the Mercury Monterey, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
Lower Intake Manifold Gasket Set: 11 Piece Set
from $33.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets

What are the top-rated Mercury Monterey Performance and Racing Products?

Top-rated Performance and Racing Products for your Mercury Monterey based on customer reviews/ratings are:
VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT
from $592.99
(15)
VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT
“OKAY”
Water Neck
from $19.99
(12)
Water Neck
“FINALLY… first time not having to re-do flimsy paper gaskets. Aside from thicker cork gasket, O ring is only way to go !”
High Perf. Full-Flow Lube Spin-on
from $16.99
(4)
High Perf. Full-Flow Lube Spin-on
“Filter size for my boat. OMC 460. works fine. HP filters have a bypass so that clogs do not cause the engine to starve for oil… important for HP eng”