Mazda CX-5 Transmission Parts

Essential Mazda CX-5 Transmission Parts

Dorman – Engine Oil Drain Plug (Part No.A61101317565DOR)

Engine Oil Drain Plug

from

$3.90
Dorman’s Oil Drain Plugs are coated for high corrosion resistance and a long service life. Many styles are available, including standard, inset gasket, molded gasket, magnetic, and pilot point.

Product Features:
  • Direct replacement for a proper fit every time
  • Dorman’s oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor and money
  • Our Oil Drain Plugs are designed and constructed to strict engineering quality standards
  • Oil Drain Plugs are also included with many of Dorman’s Engine Oil Pans
See More

Imperial – Transmission Line Fitting Kit (Part No.240395)

Transmission Line Fitting Kit

from

$23.29
Product Features:
  • Transmission line fitting kit
  • Ford; 5/8″-18 inverted flare, deep thread
  • Helps simplify transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
  • Crafted from high-quality material that makes it durable and longer-lasting
  • A high quality, direct fit OE replacement
  • Easily connects the transmission cooler line to the cooler hose
  • Hose clamps required
See More

Dorman – Standard Engine Oil Drain Plug: M14-1.5 Thread, 21.3 mm Head, 1 Pack (Part No.090-947)

Standard Engine Oil Drain Plug: M14-1.5 Thread, 21.3 mm Head, 1 Pack

from

$25.49
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

Auto Transmission Manual Shaft Seal

from

$4.79
Product Features:
  • Brand may vary by location
See More

Carquest Premium – Premium ABS Wheel Speed Sensor ARC4332 (Part No.ARC4332)

Premium ABS Wheel Speed Sensor ARC4332

from

$205.99
Computer-Aided Design (CAD), laser scanning and 3D printing “ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) “ in the part design process ensures speed-to-market and a precise fit guaranteed.

Product Features:
  • The anti-lock brake system (ABS) wheel speed sensor provides a signal to the electronic brake control module (EBCM) identifying the speed at which each wheel or axle is turning. Ideally all wheels are rotating at an equal speed or with an adjusted rate, b
  • Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Magnet size and strength optimized for precise signal output.
  • Precision-wound coated copper windings increase signal output and increase longevity.
  • Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Fluorocarbon high-temperature O-ring seals coated with lubricant for easy installation prevents hub contamination.
See More

Carquest Premium – Back Up Light Switch (Part No.SAA3676)

Back Up Light Switch

from

$64.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Anchor – Transmission Mount: Left, 1 Piece (Part No.9813)

Transmission Mount: Left, 1 Piece

from

$89.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to MAZDA 13-21;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2013-2021
  • Weight approx: 5 Lbs
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Ultra Grey RTV Gasket Maker (9.5 oz.)

from

$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:
  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
  • OEM specified
  • Low-odor, non-corrosive formula
  • Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
See More

Permatex – Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker (Part No.3K200329086PMX)

Ultra Grey® Rigid High-Torque RTV Silicone Gasket Maker

from

$12.39
3.5 oz. tube, carded – OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive.

Product Features:
  • Outstanding oil resistance and joint movement tolerance
  • Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones.
  • Temperature range -65F to 500F (-54°C to 260°C) intermittent
  • Resists auto and shop fluids and vibration Suggested Applications: Valve covers, oil pans, transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings. DIRECTIONS :
  • For best results, clean and dry all surfaces with a residue-free solvent such as Permatex® Brake and Parts Cleaner.
  • Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 to 1/4 (2 to 6 mm) bead.
  • Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes.
  • Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
  • Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
  • Silicone will skin over in one hour and fully cure in 24 hours under normal conditions.
  • Allow more time for cold or very dry conditions.
  • Clean uncured silicone from hands, tools and clothing with Permatex® Fast Orange® Wipes or Fast Orange® Hand Cleaner. NOTE: Not recommended for use on head gaskets or on parts in contact with gasoline. TECHNICAL DATA SHEET
See More

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

from

$16.99
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 90 minutes
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

High Performance Transmission Oil Cooler

from

$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 15-7/8″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty

from

$59.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 6″
  • Sub-compact to compact cars
  • GVWR up to 18,000 lbs.
  • Compatible with OEM cooler systems
See More

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty

from

$80.99
Product Features:
  • Imperial Rapid-Cool« plate and fin transmission cooler
  • Size: 3/4″ x 11″ x 9-1/2″
  • Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
  • GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
  • 33% more efficient than a comparable tube and fin design
See More

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

High Performance Transmission Oil Cooler

from

$67.99
Product Features:
  • Imperial high-performance transmission cooler
  • Size: 3/4″ x 7-1/2″ x 12-1/2″
  • SAE 45-degree fittings for maximum reliability
  • Electrostatic powder-coated to prevent corrosion
  • SAE 45 degree fittings for maximum reliability
  • Electrostatically powder coated to prevent corrosion
  • All aluminum lightweight construction
See More

SKF – Pilot Bearing (Part No.I1010168419SKF)

Pilot Bearing

from

$17.26
SKF’s clutch pilot bearings help guide and locate the driving plate in radial and axial directions and transfer loads from the clutch to the gearbox input shaft. They also enable a difference in rotational speed between crankshaft and gearbox input shafts during clutch actuation.

Product Features:
  • Extended service life
  • High running accuracy
  • Low noise and vibration level
  • Extremely compact, lightweight design
  • Sealed for life with high performance, application-specific grease
  • High axial load carrying capacity
  • Very high temperature resistance
See More

Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.9749)

Torque Strut Motor Mount: Rear, 1 Piece

from

$84.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to MAZDA 13-21;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2013-2021
  • Weight approx: 2 Lbs
  • WITHOUT SIDE PLATE
See More

Helping You Find the Right Transmission Parts for Your Mazda CX-5

You love your CX-5. So we’ve made it easier than ever to help you find Mazda CX-5 Transmission Parts in our online catalog. Our inventory holds 27 aftermarket and OEM Transmission Parts for your Mazda CX-5, ranging from $3.90 to $205.99.

We offer parts from 8 brands trusted to make quality Transmission Parts for your Mazda CX-5. Before you buy, take some time to read through customer reviews. We currently have 6,091 reviews of Mazda CX-5 Transmission Parts from previous customers. Some of the top rated parts include Maxi-Kool® XL Transmission Oil Cooler with 5.0 stars and Econo-Kool® Transmission Oil Cooler with 4.3 stars.

Find your CX-5 Transmission Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mazda CX-5 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Transmission Parts Brands for Your Mazda CX-5

Our inventory holds Transmission Parts for your Mazda CX-5 from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Permatex, Imperial, and Dorman, all of which can keep that Mazda happy.

Top-Rated Imperial Transmission Parts

Leading Imperial Transmission Parts

We carry Imperial brand parts for your Mazda CX-5 across several catalog categories, including Transmission Cooler and Parts. Some of our most reviewed Imperial parts include:
High Performance Transmission Oil Cooler
from $81.99
(48)
High Performance Transmission Oil Cooler
OE Transmission Coolers
Econo-Kool® Transmission Oil Cooler
from $54.99
(30)
Econo-Kool® Transmission Oil Cooler
OE Transmission Coolers
Econo-Kool® Transmission Oil Cooler
from $39.99
(10)
Econo-Kool® Transmission Oil Cooler
OE Transmission Coolers

FAQs for Mazda CX-5 Transmission Parts

What are the most purchased Transmission Parts for the Mazda CX-5?

Out of 27 Transmission Parts for the Mazda CX-5, the most popular in our inventory are:
High Performance Transmission Oil Cooler
from $85.99
(4)
High Performance Transmission Oil Cooler
OE Transmission Coolers
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
from $80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
OE Transmission Coolers
The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
from $16.99
This product is not rated
The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ
Transmission Oil Pan Gaskets

What are the top-rated Mazda CX-5 Transmission Parts?

Top-rated Transmission Parts for your Mazda CX-5 based on customer reviews/ratings are:
Maxi-Kool® XL Transmission Oil Cooler
from $73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
Econo-Kool® Transmission Oil Cooler
from $52.99
(4)
Econo-Kool® Transmission Oil Cooler
“I just like the additional cooling on all my vehicles for transmission to last longer. They aren’t getting any cheaper to overhaul!”
Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty
from $59.99
(3)
Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty
“Bought these before for my vehicles. Put this one on a Silhouette and by-passed the in-radiator cooler altogether. Haven’t put a thermometer on it t”