Find Knock Sensors in Montgomery, AL Near You

If you’re searching for knock sensors for your car, truck, or van in Montgomery, look no further than Advance Auto Parts. Knock sensors play a critical role in your vehicle’s engine performance; they monitor engine vibrations and adjust the timing to prevent knocking, which can lead to severe engine damage if left unchecked. If you’re considering a replacement, it’s essential to choose a quality part to maintain optimal performance. Keep in mind that related components, such as spark plugs, fuel injectors, and exhaust systems, may also require attention, especially if signs of engine trouble arise.

You can visit our conveniently located store at 600 Air Base Blvd, Montgomery, AL 36108, where our knowledgeable staff is ready to assist you. For any questions, feel free to call us at (334) 240-6405. We are in close proximity to neighborhoods like Montgomery East and just off the I-65 highway, making it easy for you to pop in during your day. We offer a variety of in-store services, including battery installation, engine code scanning, and same-day curbside pickup, ensuring that you can get back on the road quickly and safely.

With several Advance Auto Parts locations throughout Montgomery, including 243 Catoma St, Montgomery, AL 36104, and 5700 Atlanta Hwy, Montgomery, AL 36117, you’re sure to find a nearby store that caters to your needs. Our locations provide an extensive selection of parts and expert advice, so whether it’s a knock sensor or any related component that needs attention, you’ll find the help you need right around the corner.

Compare Top Selling Knock Sensors and check availability at your local Montgomery store

Bosch – Knock Sensor (Part No.0261231183)

Knock Sensor

from

$59.99
Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%.

Product Features:
  • Bosch OE quality knock sensors for optimum engine protection
  • Bosch OE quality knock sensors improve combustion efficiency and reduce fuel consumption up to 9%
  • Bosch OE quality knock sensors increase torque up to 5%
  • Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties
See More

Hitachi – Knock Sensor – New Actual OE Part (Part No.KNS0003)

Knock Sensor - New Actual OE Part

from

$73.99
Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivery industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters. Hitachi sensor line supports accurate measurement for reliable engine performance.

Product Features:
  • Hitachi is a Tier 1 OE supplier for knock sensors
  • 100% NEW, never remanufactured
  • Meets the OE performance and durability standards for this application
  • Accurate and reliable measurements
  • Provides accurate measurement; reliable engine performance.
See More

GM Genuine Parts – Ignition Knock (Detonation) Sensor (Part No.213-3521)

Ignition Knock (Detonation) Sensor

from

$85.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Sends signals to the engine control module (ECM) to adjust timing
  • Helps prevent damage to the engine caused by pre-ignition
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Knock Sensor (Part No.AS10017)

Knock Sensor

from

$82.99
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Delphi – Knock Sensor (Part No.AS10092)

Knock Sensor

from

$96.99
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

GM Genuine Parts – Ignition Knock (Detonation) Sensor (Part No.213-4583)

Ignition Knock (Detonation) Sensor

from

$36.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Sends signals to the engine control module (ECM) to adjust timing
  • Helps prevent damage to the engine caused by pre-ignition
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3655)

Ignition Knock (Detonation) Sensor

from

$73.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3654)

Ignition Knock (Detonation) Sensor

from

$58.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3656)

Ignition Knock (Detonation) Sensor

from

$28.99
Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Trivalent iridescent chromate plating prevents corrosion
  • Silicone seals prevent moisture intrusion preventing false codes and sensor failure
  • Wiring harnesses utilize high-temperature insulation when applicable
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

GM Genuine Parts – Ignition Knock (Detonation) Sensor (Part No.213-1576)

Ignition Knock (Detonation) Sensor

from

$31.99
Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Sends signals to the engine control module (ECM) to adjust timing
  • Helps prevent damage to the engine caused by pre-ignition
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3668)

Ignition Knock (Detonation) Sensor

from

$41.99
Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Trivalent iridescent chromate plating prevents corrosion
  • Silicone seals prevent moisture intrusion preventing false codes and sensor failure
  • Wiring harnesses utilize high-temperature insulation when applicable
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3663)

Ignition Knock (Detonation) Sensor

from

$84.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0213)

Ignition Knock (Detonation) Sensor

from

$74.99
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:
  • ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
  • INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
  • THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0116)

Ignition Knock (Detonation) Sensor

from

$78.99
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:
  • ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
  • INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
  • THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3669)

Ignition Knock (Detonation) Sensor

from

$24.99
Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Trivalent iridescent chromate plating prevents corrosion
  • Silicone seals prevent moisture intrusion preventing false codes and sensor failure
  • Wiring harnesses utilize high-temperature insulation when applicable
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3667)

Ignition Knock (Detonation) Sensor

from

$47.99
Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Trivalent iridescent chromate plating prevents corrosion
  • Silicone seals prevent moisture intrusion preventing false codes and sensor failure
  • Wiring harnesses utilize high-temperature insulation when applicable
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3677)

Ignition Knock (Detonation) Sensor

from

$53.99
Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Trivalent iridescent chromate plating prevents corrosion
  • Silicone seals prevent moisture intrusion preventing false codes and sensor failure
  • Wiring harnesses utilize high-temperature insulation when applicable
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3673)

Ignition Knock (Detonation) Sensor

from

$57.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3675)

Ignition Knock (Detonation) Sensor

from

$129.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0300)

Ignition Knock (Detonation) Sensor

from

$29.99
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:
  • ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
  • INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
  • THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3679)

Ignition Knock (Detonation) Sensor

from

$35.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3704)

Ignition Knock (Detonation) Sensor

from

$37.99
Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Trivalent iridescent chromate plating prevents corrosion
  • Silicone seals prevent moisture intrusion preventing false codes and sensor failure
  • Wiring harnesses utilize high-temperature insulation when applicable
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3674)

Ignition Knock (Detonation) Sensor

from

$162.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3697)

Ignition Knock (Detonation) Sensor

from

$41.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Local Montgomery Auto Parts Stores for Knock Sensors

Advance Auto Parts #3932
600 Air Base Blvd
Montgomery, AL 36108
(334) 240-6405
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #3933
243 Catoma St
Montgomery, AL 36104
(334) 832-1590
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #4241
3065a Selma Hwy
Montgomery, AL 36108
(334) 284-2516
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #5083
5700 Atlanta Hwy
Montgomery, AL 36117
(334) 244-5006
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #6095
3601 Malcolm Dr
Montgomery, AL 36116
(334) 277-3116
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #9260
2400 E South Blvd
Montgomery, AL 36116
(334) 281-2808
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #9360
460 W Fairview Ave
Montgomery, AL 36105
(334) 262-4535
Get Directions Go to Store Page Check Availability at This Store
Advance Auto Parts #9470
3036 Atlanta Hwy
Montgomery, AL 36109
(334) 395-7475
Get Directions Go to Store Page Check Availability at This Store

Get Knock Sensors near 600 Air Base Blvd

Get Directions View Store Page

Stop by the Advance Auto Parts store #3932 located at 600 Air Base Blvd, Montgomery, AL for Knock Sensors for your car, truck, or van. Conveniently situated to serve drivers in 36108 as well as nearby ZIP codes like 36054, 36066, and 36067, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (334) 240-6405.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Knock Sensor or taking advantage of the free services available, this Montgomery store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
600 Air Base Blvd
Montgomery, AL 36108
(334) 240-6405 Store Location Map
Store Hours
Monday 7:00 am-6:00 pm
Tuesday 7:00 am-6:00 pm
Wednesday 7:00 am-6:00 pm
Thursday 7:00 am-6:00 pm
Friday 7:00 am-6:00 pm
Saturday 7:00 am-7:00 pm
Sunday Closed
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Knock Sensors near 243 Catoma St

Get Directions View Store Page

Stop by the Advance Auto Parts store #3933 located at 243 Catoma St, Montgomery, AL for Knock Sensors for your car, truck, or van. Conveniently situated to serve drivers in 36104 as well as nearby ZIP codes like 36054, 36066, and 36067, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (334) 832-1590.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Paint Color Mixing, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, Aerosol Filling, Paint Color Matching, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Knock Sensor or taking advantage of the free services available, this Montgomery store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
243 Catoma St
Montgomery, AL 36104
(334) 832-1590 Store Location Map
Store Hours
Monday 7:00 am-6:00 pm
Tuesday 7:00 am-6:00 pm
Wednesday 7:00 am-6:00 pm
Thursday 7:00 am-6:00 pm
Friday 7:00 am-6:00 pm
Saturday 7:00 am-6:00 pm
Sunday Closed
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Paint Color Mixing
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Aerosol Filling
  • Paint Color Matching
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Knock Sensors near 3065a Selma Hwy

Get Directions View Store Page

Stop by the Advance Auto Parts store #4241 located at 3065a Selma Hwy, Montgomery, AL for Knock Sensors for your car, truck, or van. Conveniently situated to serve drivers in 36108 as well as nearby ZIP codes like 36054, 36066, and 36067, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (334) 284-2516.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Knock Sensor or taking advantage of the free services available, this Montgomery store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
3065a Selma Hwy
Montgomery, AL 36108
(334) 284-2516 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Knock Sensors near 5700 Atlanta Hwy

Get Directions View Store Page

Stop by the Advance Auto Parts store #5083 located at 5700 Atlanta Hwy, Montgomery, AL for Knock Sensors for your car, truck, or van. Conveniently situated to serve drivers in 36117 as well as nearby ZIP codes like 36054, 36066, and 36067, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (334) 244-5006.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day Home Delivery, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Knock Sensor or taking advantage of the free services available, this Montgomery store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
5700 Atlanta Hwy
Montgomery, AL 36117
(334) 244-5006 Store Location Map
Store Hours
Monday 7:00 am-9:00 pm
Tuesday 7:00 am-9:00 pm
Wednesday 7:00 am-9:00 pm
Thursday 7:00 am-9:00 pm
Friday 7:00 am-9:00 pm
Saturday 7:00 am-9:00 pm
Sunday 8:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day Home Delivery
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Knock Sensors near 3601 Malcolm Dr

Get Directions View Store Page

Stop by the Advance Auto Parts store #6095 located at 3601 Malcolm Dr, Montgomery, AL for Knock Sensors for your car, truck, or van. Conveniently situated to serve drivers in 36116 as well as nearby ZIP codes like 36054, 36066, and 36067, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (334) 277-3116.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Knock Sensor or taking advantage of the free services available, this Montgomery store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
3601 Malcolm Dr
Montgomery, AL 36116
(334) 277-3116 Store Location Map
Store Hours
Monday 7:00 am-9:00 pm
Tuesday 7:00 am-9:00 pm
Wednesday 7:00 am-9:00 pm
Thursday 7:00 am-9:00 pm
Friday 7:00 am-9:00 pm
Saturday 7:00 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Knock Sensors near 2400 E South Blvd

Get Directions View Store Page

Stop by the Advance Auto Parts store #9260 located at 2400 E South Blvd, Montgomery, AL for Knock Sensors for your car, truck, or van. Conveniently situated to serve drivers in 36116 as well as nearby ZIP codes like 36054, 36066, and 36067, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (334) 281-2808.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Hydraulic Hose Assemblies, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Knock Sensor or taking advantage of the free services available, this Montgomery store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
2400 E South Blvd
Montgomery, AL 36116
(334) 281-2808 Store Location Map
Store Hours
Monday 7:00 am-9:00 pm
Tuesday 7:00 am-9:00 pm
Wednesday 7:00 am-9:00 pm
Thursday 7:00 am-9:00 pm
Friday 7:00 am-9:00 pm
Saturday 7:00 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Hydraulic Hose Assemblies
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Knock Sensors near 460 W Fairview Ave

Get Directions View Store Page

Stop by the Advance Auto Parts store #9360 located at 460 W Fairview Ave, Montgomery, AL for Knock Sensors for your car, truck, or van. Conveniently situated to serve drivers in 36105 as well as nearby ZIP codes like 36054, 36066, and 36067, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (334) 262-4535.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Knock Sensor or taking advantage of the free services available, this Montgomery store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
460 W Fairview Ave
Montgomery, AL 36105
(334) 262-4535 Store Location Map
Store Hours
Monday 7:30 am-9:00 pm
Tuesday 7:30 am-9:00 pm
Wednesday 7:30 am-9:00 pm
Thursday 7:30 am-9:00 pm
Friday 7:30 am-9:00 pm
Saturday 7:30 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes

Get Knock Sensors near 3036 Atlanta Hwy

Get Directions View Store Page

Stop by the Advance Auto Parts store #9470 located at 3036 Atlanta Hwy, Montgomery, AL for Knock Sensors for your car, truck, or van. Conveniently situated to serve drivers in 36109 as well as nearby ZIP codes like 36054, 36066, and 36067, this store offers a wide selection of quality parts and the expert support you need to get the job done right. For questions about product availability or guidance, give the store a call at (334) 395-7475.

This Advance Auto Parts location also provides several free in-store services to make your experience more convenient. Services include Engine (OBD-II) Code Scanning, Same Day Curbside Pickup, Loaner Tools, Wiper Blade Installation, Battery Installation, Motor & Gear Oil Recycling, Battery Recycling, Same Day In Store Pickup, and Charging & Starting System Testing. If you need tools for your repair, the store offers loaner tools. Further, at this store you can take advantage of same-day in-store pickup or curbside pickup for added convenience.

Whether you’re shopping for a specific part like a Knock Sensor or taking advantage of the free services available, this Montgomery store is ready to help you get back on the road. You can find the current store hours listed in the table below, or visit the store detail page here!

Store Info
3036 Atlanta Hwy
Montgomery, AL 36109
(334) 395-7475 Store Location Map
Store Hours
Monday 7:00 am-9:00 pm
Tuesday 7:00 am-9:00 pm
Wednesday 7:00 am-9:00 pm
Thursday 7:00 am-9:00 pm
Friday 7:00 am-9:00 pm
Saturday 7:00 am-9:00 pm
Sunday 9:00 am-8:00 pm
Free In-Store Services
  • Engine (OBD-II) Code Scanning
  • Same Day Curbside Pickup
  • Loaner Tools
  • Wiper Blade Installation
  • Battery Installation
  • Motor & Gear Oil Recycling
  • Battery Recycling
  • Same Day In Store Pickup
  • Charging & Starting System Testing
Buy Online, Free Curbside, or In Store Pickup Fast & Free • Ready In 30 Minutes
Free In Store Services

Personalized care including battery testing and installation, oil recycling, wiper installation and more!

Advance Same Day

Free in store or curbside pickup. Plus delivery available in select markets.

Speed Perks

Get points for every purchase. Redeem points for rewards.

Now Hiring 18 Year Old Drivers

Advance your future today. Become a certified fleet driver. Apply now.

Rebates and Sweepstakes

Find out about rebate and sweepstake offers, submit your rebate online and more!

Need a Certified Technician?

We have approved professionals to repair any problem you have.