from

$8.99

1/2″ to 7/16″ ring gear bolt sleeve.

Product Features:

Ring gear bolt sleeve
Adapts 1/2″ to 7/16″

from

$238.99

Designed to shield your differential from direct contact in severe off-road conditions, the Rancho® rockGEAR® rear differential cover for the Jeep® Wrangler JL and Gladiator JT is manufactured from high-strength nodular iron for added axle and int

Product Features:

COMPATIBILITY — Fits Jeep Wrangler JL and Gladiator JT, Dana 44
BUILT FOR THE TRAIL — Protects differential cover from rocks and other obstacles while off-roading, rock crawling and trail riding
ADDED PROTECTION — Mounts to Dana 44 rear differential for added axle and internal gear protection
EXTRA STRENGTH — Ribbed external construction for added strength
RESISTS CORROSION — Durable red powder-coat finish resists rust and corrosion
ENGINEERED TO LAST — High-strength ductile iron steel construction for added axle and internal gear protection
ACCESS FOR FILLING — Off-set, oversized fill plug for increased fluid capacity and easier/quicker filling

from

$5.99

Do you have a gear oil leak around your axle shaft? Worried you could run low on gear oil and ruin the axle? Omix-ADA offers high-quality replacement axle seals to keep the gear lube inside the axle where it belongs.

Product Features:

Inner
OE Style
Direct Fit
Limited 5 Year Warranty

from

$187.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 44 JK Rubicon rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$4.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$503.99

Yukon Power Lok positraction replacement internals for Dana 44 and Chysler 8.75″ with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.

from

$4.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$41.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$59.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Designed for ease of installation
Includes necessary hardware
Designed for superior performance
Designed for ultimate strength
Increased tolerance for a performance fit
Meets deflection parameters

from

$1458.99

Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:

Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
OEM cores are processed as individual units throughout the tear down and assembly process
Cores cleaned using our Hydro Blast cleaning and rinse process
All case halves wet sanded to ensure perfect mating surfaces
Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
Remanufactured in our ISO9001:2008 USA facility.
Without Motor

from

$27.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$39.23

Wheel Seal

from

$12.99

Product Features:

Cover gasket
Fits Dana Spicer 30

from

$175.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

High strength steel
Dual heat treating process

from

$2700.00

Locking Hub Conversion Kit for Jeep XJ, YJ & TJ Dana 30 front, 5 x 5.5″ bolt pattern. The Yukon worry free Spin Free Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving selectability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation.

Product Features:

Fits Jeep Wrangler and Cherokee front
Includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, premium locking hubs, Timken bearings, high quality seals and all hardware for installation.
5 x 5.5″ bolt pattern

from

$26.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$18.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$242.99

Yukon long yoke for Model 35 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. Not common. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits AMC Model 35
26 spline
1330 u-joint size
Outside snap ring design
3.625″ snap ring span
1.062″ cap diameter
Strap style

from

$13.99

Product Features:

O-ring for seal housing
Fits Dana Spicer 30 and AMC Model 35

from

$131.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

MASTER KIT DANA 30 TJ ALL/WJ 97 ON EXPLORER FRONT 01&ON

from

$5.99

Model 35 roll pin for cross pin shaft, 0.190″ DIA.

Product Features:

Roll pin
Fits AMC Model 35

from

$678.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

3.55-4.56 Ratios
Includes Bolts; Bearings; And Shims
OE Style
Direct Fit
Limited 5 Year Warranty

from

$18.99

Product Features:

Bulkhead quit connect fitting

from

$37.49

This 4WD axle actuator housing directly replaces the original equipment housing on certain vehicle years, makes and models.

Product Features:

Direct replacement – matches the fit and function of the original housing on specific vehicle applications
Effective fix – installation restores performance affected by failed original actuator housing
Smart solution – allows replacement of only housing without needing to replace entire transfer case
Trustworthy quality – backed by team of designers and engineers in the United States