2020 Jeep Wrangler Drivetrains

Name: Differential Bearing Kit - Timken
Brand: Motive Gear
SKU: RA28LRT
Price: 125.99 USD

Below you will find various in-demand Jeep Drivetrains, components and accessories for your 2020 Wrangler. Advance Auto Parts has popular Wrangler parts like Spindles, Universal Joints, Differentials and more. You’ll also find aftermarket and OEM Drivetrains for other Wrangler model years including 2014, 2015, 2016, 2017, 2018, 2019, 2021, 2022, 2023 and more. Select a category of 2020 Jeep Wrangler Drivetrains below and start saving instantly.

Popular 2020 Jeep Wrangler Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

U-Joints

Differential Open Unit and Components

Differential Covers

Drive and Prop Shaft Assemblies

Differential Bearing Kits

Differential Spider Gear Kits

Differential Ring and Pinions

Spindle Lock Nuts

Transfer Case Switches

Differential Pinion Shafts

Differential Crush Sleeves

Differential Pinion Shims

Axle Shaft Studs

Essential Drivetrains for 2020 Jeep Wranglers

from

$125.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

DANA-44 TIMKEN LATE

from

$84.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

OE Style
Direct Fit

from

$26.99

Spartan spring & pin kit, fits smaller designs.

Product Features:

Replacement spring and pin kit for Spartan Locker
Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
Includes 4 springs and 4 alignment pins

from

$427.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$46.99

Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.

Product Features:

Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
Bearing cups are heat treated for strength; precision-ground and case-hardened for durability.
Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.

from

$31.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$7.99

Wheel Lug Stud

from

$6.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits standard rotation Dana Spicer 30 with short pinion
7.20″ ring gear diameter
26 spline pinion
10 ring gear bolts
3.55 ratio

from

$2.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$3.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, features factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Designed For Performance And Durability
Easy To Install

from

$1201.99

Drive Shaft – Rear

from

$911.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$752.99

This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:

Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications
Effective fix – eliminates grinding and whining from failed original bearings
Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
Trustworthy quality – backed by team of designers and engineers in the United States

from

$359.99

Fits standard rotation Dana Spicer 30 with short pinion
7.20″ ring gear diameter
26 spline pinion
10 ring gear bolts
4.11 ratio

from

$44.99

Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$33.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$44.99

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Front/Rear
Steel
OE Style
Direct Fit

from

$12.99

Product Features:

KIT SHIM

from

$26.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$48.99

Product Features:

Fits reverse rotation Dana Spicer 30
Chrome

from

$581.99

Durable Cast Aluminum
Magnetic Drain and Fill Plugs Capture Loose Particles
Calibration Plug Set to Factory Fill Level Eliminates Overfilling
Oil Level Sight Glass for Quick/Easy Inspection

from

$471.99

Rebuilding your Jeep differentials? Are the spider gears worn? While everything is apart, it’s smart to replace worn gears. That will save the labor to do it again later. Or risk having the gear teeth break and ruin more parts.

Product Features:

Rear
Differential Cover Gasket Sold Separately
OE Style
Direct Fit

from

$218.99

Yukon standard open spider gear replacement kit for Dana 44 with 30 spline axles (all are without c-cup, including IFS). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Dana Spicer 44 open differential with 30 spline axles
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$69.99

Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$12.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.99

Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 2020 Jeep Wrangler with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2020 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Drivetrains are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 38 Drivetrains for the 2020 Jeep Wrangler, designed to meet your needs without breaking the bank. From Spindle replacements to Universal Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2020 Jeep Wrangler at great prices. Our Drivetrains inventory for this model ranges from just $6.99 to $1,279.99, with an average price of $307.58. Our 38 Drivetrains in stock come from 11 trusted brands, so you’re sure to find the right part for your 2020 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Jeep Wrangler, we stock popular OEM and aftermarket Drivetrains from top names like Castrol, Valvoline, Spicer, and more. Castrol Drivetrains start at just $14.79 and boast an impressive 4.9 stars average rating from customers. Valvoline and Spicer also bring quality to the table, with Drivetrains available starting at $38.99, and at an average 4.8 stars rating. With 8,857 customer reviews and counting, our 2020 Jeep Wrangler Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 2020 Jeep Wrangler!

Best-Selling Spindles for 2020 Jeep Wranglers

Enhance the driving experience in your Jeep with 2 quality Spindle components, starting at $12.99.

show more show less

from

$16.99

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 2020 Jeep Wrangler Universal Joints

Customize your Jeep with 1 Universal Joints products like U-Joints, all priced under $48.49.

show more show less

from

$48.49

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants

Top Picks for 2020 Jeep Wrangler Differentials

Upgrade Jeep Wranglers with top-quality Differentials parts, including 26 OEM and aftermarket selections for your 2020 model.

show more show less

from

$69.99

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$14.79

Product Features:

Technologically advanced, full synthetic formulation provides superior transmission life
Engineered with superior base oils to ensure superb low and high temperature performance
Certified and approved for all Chrysler cars and trucks that require ATF+4«, Mopar ATF+3«, ATF+2«, ATF+2 Type 7176«, or ATF+«
Meets or Exceeds Fiat Chrysler ATF+4« requirements.
Packaged in a convenient 1-quart size for easy handling and precise application during maintenance.

from

$18.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$16.99

Product Features:

PINION SHIM-DANA 30,35.50

from

$155.99

Yukon replacement standard open spider gear kit for Dana 30 with 27 spline axles and with or without quick disconnect. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Dana Spicer 30 open differential with 27 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$26.99

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$581.99

Durable Cast Aluminum
Magnetic Drain and Fill Plugs Capture Loose Particles
Calibration Plug Set to Factory Fill Level Eliminates Overfilling
Oil Level Sight Glass for Quick/Easy Inspection

from

$536.99

aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and a red powder coated finish with machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. The Pro Series differential covers include a oil level sight glass. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum front-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:

Durable Cast Aluminum
Magnetic Drain and Fill Plugs Capture Loose Particles
Calibration Plug Set to Factory Fill Level Eliminates Overfilling
Oil Level Sight Glass for Quick/Easy Inspection

from

$536.99

aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. The Pro Series differential covers include a oil level sight glass. This cover has about a 2 quart lube capacity at the factory line. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum front-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:

Durable Cast Aluminum
Magnetic Drain and Fill Plugs Capture Loose Particles
Calibration Plug Set to Factory Fill Level Eliminates Overfilling
Oil Level Sight Glass for Quick/Easy Inspection

from

$514.99

Durable Cast Aluminum
Magnetic Drain and Fill Plugs Capture Loose Particles
Calibration Plug Set to Factory Fill Level Eliminates Overfilling
Oil Level Sight Glass for Quick/Easy Inspection

from

$514.99

aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and a black powder coated finish with machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. The Pro Series differential covers include a oil level sight glass. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum front-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:

Durable Cast Aluminum
Magnetic Drain and Fill Plugs Capture Loose Particles
Calibration Plug Set to Factory Fill Level Eliminates Overfilling
Oil Level Sight Glass for Quick/Easy Inspection

from

$444.99

aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. This cover fits 18-20 Jeep Wrangler (JL) Sport Dana M186 12 bolt front axles. This cover has about a 2 quart lube capacity at the factory line. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum front-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:

Durable Cast Aluminum
Magnetic Drain Plug Captures Loose Particles
Calibration Plug Set to Factory Fill Level Eliminates Overfilling
Built-In External and Internal Fins Dissipate Heat

from

$444.99

aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs and machined fins for maximum strength and styling. This cover comes with all necessary hardware for easy installation. This cover fits 18-20 Jeep Wrangler (JL) with Dana M220 12 bolt rear axles. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This system incorporates a magnetic drain plug to capture loose particles for maximum rear-end protection. Also included is a 1/8″ NPT calibration plug that is set to the factory fluid level which eliminates accidental overfilling.

Product Features:

Durable Cast Aluminum
Magnetic Drain Plug Captures Loose Particles
Calibration Plug Set to Factory Fill Level Eliminates Overfilling
Built-In External and Internal Fins Dissipate Heat

from

$439.99

Ring&Pinion Gear Set

from

$429.99

Ring&Pinion Gear Set

from

$427.99

from

$384.99

DiffrlPartsKit

from

$381.99

MstrDffrntlRebuildKt

from

$369.99

MstrDffrntlRebuildKt

from

$238.99

Product Features:

COMPATIBILITY – Fits Jeep Wrangler JL, Dana 44
BUILT FOR THE TRAIL – Protects differential cover from rocks and other obstacles while off-roading, rock crawling and trail riding
ADDED PROTECTION – Mounts to Dana 44 front differential for added axle and internal gear protection
EXTRA STRENGTH – Ribbed external construction for added strength
RESISTS CORROSION – Durable red powder-coat finish resists rust and corrosion
ENGINEERED TO LAST – High-strength ductile iron steel construction for added axle and internal gear protection
ACCESS FOR FILLING – Off-set, oversized fill plug for increased fluid capacity and easier/quicker filling
BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty

from

$238.99

Product Features:

COMPATIBILITY – Fits Jeep Wrangler JL and Ford Bronco (excludes Bronco Sport), Dana 44
BUILT FOR THE TRAIL – Protects differential cover from rocks and other obstacles while off-roading, rock crawling and trail riding
ADDED PROTECTION – Mounts to Dana 44 front differential for added axle and internal gear protection
EXTRA STRENGTH – Ribbed external construction for added strength
RESISTS CORROSION – Durable red powder-coat finish resists rust and corrosion
ENGINEERED TO LAST – High-strength ductile iron steel construction for added axle and internal gear protection
ACCESS FOR FILLING – Off-set, oversized fill plug for easier/quicker filling
BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty

from

$235.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$209.99

from

$206.99

In-Demand Drive Shafts and Axles for 2020 Jeep Wranglers

Select from 8 premium Drive Shafts and Axles parts for your 2020 Jeep Wrangler, with prices ranging from $6.99 to $1,279.99.

show more show less

from

$38.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$45.99

from

$6.99

Fits standard rotation Dana Spicer 30 with short pinion
7.20″ ring gear diameter
26 spline pinion
10 ring gear bolts
3.55 ratio

from

$1279.99

Drive Shaft – Front

from

$1036.99

Drive Shaft – Front

from

$1036.99

Drive Shaft – Front

from

$1036.99

Drive Shaft – Rear

from

$75.99

Most Sold 2020 Jeep Wrangler Transfer Cases

Explore our best-selling Jeep parts for the 2020 Wrangler among 1 OEM and aftermarket options starting from $96.99.

show more show less

from

$96.99

This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

Product Features:

Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications
Effective fix – restores proper 4WD operation after original switch degrades and fails
Durable construction – built for reliable longevity, free of defects in materials and craftmanship
Trustworthy quality – backed by team of designers and engineers in the United States

Top-Rated Drivetrains Brands For Your 2020 Jeep Wrangler

Shop for the best-rated brands offering Drivetrains and other products for your 2020 Jeep Wranglers. Below you’ll find some of our best rated Drivetrains from Castrol, Valvoline, and Spicer, and more. Drivetrains from these brands that fit a 2020 Wrangler start at just $14.79 and are rated as high as 4.9 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Castrol 2020 Jeep Wrangler Drivetrains

When it comes to maintaining or upgrading your 2020 Jeep Wrangler, using quality Drivetrains is essential to ensure durability and a perfect fit. Castrol ticks all of those boxes. We offer a wide selection of Castrol Drivetrains, specifically designed for the 2020 Jeep Wrangler. With over 1 Castrol brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.79. Plus, with over 146 customer reviews and an average rating of 4.9 stars, you can trust that our Castrol Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.79

(146)

Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart

“Perfect”

Popular Valvoline 2020 Jeep Wrangler Drivetrains

Valvoline auto parts is one of the highest quality Drivetrain brands in the market. Any 2020 Jeep Wrangler owner should feel confident when installing genuine Valvoline parts in their vehicle. To ensure the best fit and performance for your 2020 Wrangler, Advance Auto Parts carries a full inventory of 1 Valvoline Drivetrains. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Valvoline Drivetrains range up to $69.99, plus, with more than 364 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $69.99

(364)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

“Happy with purchase”

FAQs for 2020 Jeep Wrangler Drivetrains

Which Drivetrains are best-sellers for 2020 Jeep Wranglers?

Out of 38 Drivetrains that fit 2020 Jeep Wranglers, the following parts are the top sellers:

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
Universal Joint (10855078) – $38.99
Universal Joint (10854998) – $45.99

What’s the price range for 2020 Jeep Wrangler Drivetrains?

Drivetrain prices for the 2020 Jeep Wrangler start at $6.99 and go up to $1,279.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2020 Jeep Wrangler?

The average price for Drivetrains for the 2020 Jeep Wrangler is $307.58. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Jeep Wrangler model years?

Yes, we currently carry Drivetrains for 36 model years of Jeep Wranglers between 1987 and 2025. Drivetrains are bought most frequently for the following model years: 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Drivetrains for my 2020 Jeep Wrangler?

The cheapest 2020 Jeep Wrangler Drivetrains we carry in stock are:

Axle Stud For Chrysler 9.25" Zf Rear (11642963) – $6.99
Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (22190195) – $12.99
Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (8140018) – $14.79
Hybrid ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (50014386) – $14.99
Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (12029529) – $16.99

What are the top-rated Drivetrains that fit the 2020 Jeep Wrangler?

Out of 8,857 reviews by customers, our 2020 Jeep Wrangler Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2020 Jeep Wrangler and their top-rated products:

Differentials
- SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (12048191) – $69.99
- Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (8140018) – $14.79

What types of Drivetrains do you sell for my 2020 Jeep Wrangler?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2020 Jeep Wrangler:

Can I get help with 2020 Jeep Wrangler Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Drivetrains and more.

What is your return policy for Jeep Wrangler Drivetrains?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2020 Jeep Wrangler Drivetrains

Motive Gear – Differential Bearing Kit – Timken (Part No.RA28LRT)

Omix – 4WD Light Switch; NP231; 91-06 Jeep Models (Part No.18676.15)

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Powertrax – Grip PRO Traction System (Part No.GT443027)

Spicer – Axle Shaft Universal Joint, Greaseable, 1310WJ Series (Part No.5-3226X)

Spicer – Universal Joint, Greaseable 1310 Series OSR (Part No.5-153X)

Yukon Gear – Wheel Lug Stud (Part No.33571)

Yukon Gear – Axle Stud For Chrysler 9.25" Zf Rear (Part No.33555)

Pro-King – Crush Sleeve (Part No.721A034)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.3175779)

Yukon Gear – Drive Shaft – Rear (Part No.45026)

Dorman – Drive Shaft: Greaseable, Adjustable (Part No.936-085)

Dorman – Differential Ring and Pinion Set (Part No.697-200)

Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 Short Pinion In A 4.11 Ratio (Part No.24027)

Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.269)

Omix – Pinion Shim Kit; Dana 44; 03-11 TJ/LJ/JK (Part No.16519.05)

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Richmond Gear – Differential Cross Shaft (Part No.CSPD44)

Yukon Gear – Replacement Chrome Cover For Dana 30 Reverse Rotation (Part No.32002)

aFe POWER – Differential Cover (Part No.46-71011B)

Omix – Spider Gear Kit; for Dana 44 (Part No.16509.07)

Yukon Gear – Dana 44 Standard Open Spider Gear Kit Replacement (Part No.16077)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-095)

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (Part No.05177)

Dorman – Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-096)

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (Part No.05177)

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-095)

MOOG Driveline Products – Universal Joint (Part No.496)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

Castrol – Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (Part No.15A9FA)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Motive Gear – Differential Pinion Shim Kit (Part No.1112)

Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles (Part No.16073)

Richmond Gear – Differential Cross Shaft (Part No.CSPD44)

aFe POWER – Differential Cover (Part No.46-71011B)

aFe POWER – Differential Cover (Part No.46-71000R)

aFe POWER – Differential Cover (Part No.46-71010R)

aFe POWER – Differential Cover (Part No.46-71010B)

aFe POWER – Differential Cover (Part No.46-71000B)

aFe POWER – Differential Cover (Part No.46-71010A)

aFe POWER – Differential Cover (Part No.46-71000A)

Yukon Gear – Ring&Pinion Gear Set (Part No.24801)

Yukon Gear – Ring&Pinion Gear Set (Part No.24807)

Powertrax – Grip PRO Traction System (Part No.GT443027)

Yukon Gear – DiffrlPartsKit (Part No.14231)

Yukon Gear – MstrDffrntlRebuildKt (Part No.14230)

Yukon Gear – MstrDffrntlRebuildKt (Part No.14235)

Rancho – RockGEAR Differential Cover (Part No.RS62119)

Rancho – RockGEAR Differential Cover (Part No.RS62120)

Motive Gear – Differential Ring and Pinion (Part No.D30-456RJK)

Motive Gear – Differential Ring and Pinion (Part No.D30-513RJK)

Motive Gear – Differential Ring and Pinion (Part No.D30-488RJK)

Spicer – Universal Joint (Part No.5-1310X)

Spicer – Universal Joint (Part No.5-1350X)

Yukon Gear – Axle Stud For Chrysler 9.25" Zf Rear (Part No.33555)

Yukon Gear – Drive Shaft – Front (Part No.45031)

Yukon Gear – Drive Shaft – Front (Part No.45030)

Yukon Gear – Drive Shaft – Front (Part No.45028)

Yukon Gear – Drive Shaft – Rear (Part No.45029)

Spicer – Axle Shaft Universal Joint (Part No.5-7166X)

Dorman – Transfer Case Indicator Mode Switch (Part No.600-555)