1997 Jeep Wrangler Drivetrains
More 1997 Jeep Wrangler Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1997 Jeep Wrangler, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1997 Jeep Wrangler Drivetrains
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Omix – Differential Bearing (Part No.16527.08)
from
$55.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
Product Features:
See More
Product Features:
- Outer
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – Zip Locker Bulkhead Fitting (Part No.34001)
Omix – Drive Shaft Pinion Yoke (Part No.16580.20)
from
$59.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Steel
- 26 Spline
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
Dorman – OE Solutions Axle Shaft Kit (Part No.K4005683757DOR)
from
$641.86
Dorman’s Axle Shaft comes as a complete kit. Packaged with all the installation hardware essential for a complete repair, it provides time-saving convenience at an affordable price.
Product Features:
See More
Product Features:
- Comes assembled with U-Joints installed
- Direct replacement for a proper fit every time
- Durable steel construction for long-lasting performance
- Vehicle try-on testing has been conducted on this part to ensure trouble-free performance
Omix – Differential Case Assembly (Part No.16505.11)
from
$868.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Rear
- 3.07 Ratio
- OE Style
- Direct Fit
- Limited 5 Year Warranty
National – Bearings (Part No.02820)
from
$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Spindle Bearing/Oil Seal Kit (Part No.S-SBK-1)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Omix – Transfer Case Output Seal (Part No.18676.29)
from
$8.49
Tired of looking at the stains on your driveway? Gaskets are a cheap solution to prevent or stop leaks. Omix-ADA offers high quality replacement gaskets designed specifically for your Jeep.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Rear
- Limited 5 Year Warranty
Yukon Gear – Grizzly Locker, Dana 30, 30 Spline, 3.73 & Up (Part No.28029)
from
$941.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 with 30 spline axles
- 3.73 and up ratio only
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-984)
from
$50.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Replacement Floater Roll Pin For Dana 44 & 8.75" Chrysler Power Lok (Part No.33326)
from
$5.99
Product Features:
See More
- Floater roll pin
- Fits Dana Spicer 44 and Chrysler 8.75″
- Powr Lok positraction only
Motive Gear – Differential Gear Install Kit (Part No.D30IK)
Yukon Gear – Super Carrier Shim Kit For Model 35 (Part No.55063)
from
$54.99
Model 35 differential carrier Supershim kit.
Product Features:
See More
Product Features:
- Super carrier shim kit for AMC Model 35
- Interlocking design makes installation much easier
Spicer – Universal Joint (Part No.5-212X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Omix – Pinion Bearing (Part No.16517.01)
from
$85.99
Is your axle’s differential making ugly noises? It could be that the pinion bearing has starved for oil or it is worn out from high mileage. The longer you wait to fix it, the more damage will be done. Omix-ADA offers new replacement pinion bearings for y
Product Features:
See More
Product Features:
- With Tapered Axle
- Includes Bearing And Cup
- OE Style
- Direct Fit
- Limited 5 Year Warranty
National – Bearings (Part No.B-2110)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Universal Joint (Part No.41218)
from
$159.99
Universal Joint
Crown Auto Jeep Replacmnt – Axle Yoke, U-Bolt Style, With Pinon Yoke Only, Rear, Dana 35 (Part No.4746835)
from
$60.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Limited 12 Month Or 12,000 Mile Warranty
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Omix – Axle Seal Retainer (Part No.16535.40)
from
$39.99
Axle seal retainer, rear, 2007-2012 Wrangler with Dana 35 and Dana 44
Product Features:
See More
Product Features:
- Rear
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Yukon Gear – Outer Stub Thrust Washer For Dana 30 & 44 (Part No.33534)
Yukon Gear – Pinion Install Kit For Dana 44 JK Rubicon Front Differential (Part No.13098)
from
$265.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits reverse rotation Dana Spicer 44 JK Rubicon
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – Pinion Install Kit For Dana 44 JK Rubicon Rear Differential (Part No.13099)
from
$187.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 JK Rubicon rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Replacement Carrier Shim Kit For Dana 44 JK Rear (Part No.55029)
from
$138.99
Replacement carrier shim kit for Dana 44 JK rear.
Product Features:
See More
Product Features:
- Carrier shim kit for Jeep JK rear
Popular 1997 Jeep Wrangler Drivetrains Categories
1997 Jeep Wrangler Drivetrains
You count on your 1997 Jeep Wrangler to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 574 Drivetrains ranging in price from $1.49 to $2,700.00, you’re sure to find everything you need for your 1997 Jeep Wrangler.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 24 different brands like Valvoline, Moog, and Driveworks. 1997 Jeep Wrangler Drivetrains start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,778 extensive product reviews on 1997 Jeep Wrangler Drivetrains. Some of the top-rated Drivetrains products we carry are Differential Ring and Pinion Set with 3.8 stars and Greaseable Super Strength Universal Joint with 4.4 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1997 Jeep Wrangler below to get started!
Top-Rated Drivetrains Brands For Your 1997 Jeep Wrangler
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1997 Jeep Wrangler running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1997 Jeep Wrangler back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Valvoline Drivetrains
If Valvoline are what you’re looking for, our inventory holds plenty. We stock Valvoline brand Drivetrains for your 1997 Jeep Wrangler, and some of our most reviewed Valvoline parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1997 Jeep Wrangler Drivetrains
What are the most purchased Drivetrains for the 1997 Jeep Wrangler?
Out of 574 Drivetrains for the 1997 Jeep Wrangler, the most popular in our inventory are:
What are the top-rated 1997 Jeep Wrangler Drivetrains?
Top-rated Drivetrains for your 1997 Jeep Wrangler based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
