GMC Canyon Parts

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

AT OIL PUMP SEAL

AT EXT HOUSING SEAL

Product Features:

• Transmission line fitting kit
• GM snap-in-style lines
• Helps simplify transmission cooler installation
• Allows for auxiliary transmission cooler installation without cutting OE lines
• Crafted from high-quality material that makes it durable and longer-lasting
• A high quality, direct fit OE replacement
• Easily connects the transmission cooler line to the cooler hose
• Precision machined

A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

• Furnace Brazed Impeller
• Steel Alloy Pump Drive Tube
• Heavy Duty Needle Bearing
• Between Stator and Turbine
• Furnace Brazed Turbine
• New Turbine Hub
• New Springs/Rollers In Stator

This automatic transmission shifter cable lever is designed to match the fit and function of the original lever on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this automatic transmission shifter cable lever is designed to match the fit and function of the original lever
• Restores functionality – reliable replacement for an original part that has failed due to corrosion
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Shift Solenoid

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:

• Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
• Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
• Flanged Nut
• Increased Strength And Improved Flywheel Register
• 0.88″ Underhead Length
• Set of 6
• 200,000 PSI
• 1-PC Rear Main

This neutral safety switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this neutral safety switch connector matches the appearance and function of the factory hardware on specified applications
• Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

AUTO TRANS BAND

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

• Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
• Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
• Durable construction – made of quality materials for reliable performance and long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Product Features:

• Brand may vary by location

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 15-17; CHEV 99-21; GMC 99-21;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1999-2021
• Weight approx: 4 Lbs
• WITH INTERLOCK

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

• Does not include steels or filter

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

• Quick Link Splice Connectors

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

ATHARNESS VSS REPR

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

B&M transmission bracket for General Motors 4L60E, 4L65E, 4L80E and 4L85E automatic transmissions with a PRNDL style switch.

Product Features:

• Shifter Service Parts

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

• Balanced to factory specs
• Fit and function like the original parts
• Restores normal operation

Flywheels Are Engineered & Manufactured To OE Specifications.

Product Features:

• Manufactured From Premium Grade Materials For Superior-Quality Friction Surface & Excellent Heat-Absorption Capacity.

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

• For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
• The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
• Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
• Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
• Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:

• High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
• Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
• Large Diameter, Low Profile Design
• Complete With Washers
• Sold As A Kit
• 180,000 PSI

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Support the end of the transmission input shaft while the clutch is disengaged
• Allows for smooth changing of gears
• Helps keep transmission input shaft properly aligned
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

FLYWHEEL SHIM

FLYWHEEL SHIM

Let fresh air in while keeping the weather out. Stylishly designed and simple to install, trailFX window vents are the perfect all weather accessory for any vehicle. All TrailFX window vents feature a limited lifetime warranty.

Product Features:

• Designed And Manufactured To Perfectly Match The Contour Of The Window
• Constructed From High-Quality, Durable Acrylic With A Smoke Tint
• Low Profile Design Decreases Wind Noise And Provides Greater Side Mirror Visibility
• Keeps Rain Out And Lets Fresh Air In
• Installs In Minutes To The Outside Of The Window Channel Without Tools Using Pre-Applied Automotive Grade 3M Tape
• Easy Install, No Drill Installation: Installation Stick On Outside Window Channel

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
• All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
• All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
• Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
• Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
• No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

Need a new keyless remote? This fob is designed to look and function exactly like your original, and you don’t need to pay for expensive programming at the car dealership. This Dorman OE FIX replacement includes a patented, DIY-friendly programming tool for simple replacement. Just plug it into the OBD II port in your dashboard, follow the included instructions, and you’re good to go. Setup takes minutes, and you can rely on your new remote for years.

Product Features:

• Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
• Do-it-yourself solution – includes a patented programmer that plugs into your OBD II port to setup your new fob in minutes, without expensive dealership programming
• Matches features – this 3-button remote control features lock, unlock and panic functions
• Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a Limited Lifetime Warranty.

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern; Curved Design
• Easy Installation With No-Drilling Or Special Hardware Required
• Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
• Made From Durable; Impact-Resistant Acrylic
• Available In Dark Smoke And Chrome Finishes

This direct replacement cigarette light is designed to match the fit and function of the original lighter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this direct replacement cigarette lighter is designed to match the fit and function of the original lighter on specified vehicles
• Ideal solution – this cigarette lighter is a reliable replacement for an original lighter that is missing or burned out
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

You can never have enough rugged storage. Whether you are storing tools, hauling game day gear, or coming up with literally hundreds of other uses- Dee Zee universal poly plastic chest is like the Swiss Army Knife of utility chests. Constructed of strong yet lightweight plastic with a double wall lid, our universal utility chest can handle all the abuse you can throw at it. We have designed our utility chest to add quick, convenient storage for all sorts of applications. Available in two sizes to suit your needs. We even provided molded drink holders in case you decide to use it on the go and get a little thirsty. Do not worry if the weather does not cooperate, a foam gasket around the lid helps defend your items against the elements.

Product Features:

• Classic Raised Brite Tread Pattern
• Rigid Frame Resists Warping
• Molded Locking Tabs
• Poly Plastic Storage Chest Rigid Plastic Frame Resists Warping
• Made In USA

New Standard Replacement Front License Plate Bracket, Except Colorado With Xtreme Package

Product Features:

• Excludes Colorado With Xtreme Package, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Needing a new key? We’ve got you covered! This key contains an embedded micro-chip called a transponder. Each transponder has its own unique code–it’s the key’s ‘fingerprint’. When the key is inserted into the ignition and turned, the transponder is energized and broadcasts its unique code to the car’s receiver in the dashboard. If the car’s receiver recognizes the code, it will allow the car to start. This specific key holds a Philips 46 crypt chip and has a wide range of compatibilities with multiple Buick, Chevrolet, and GMC vehicles. This key also has a high security key blade, a preventive measure against ignition picking and key duplication. The key blade will need to be cut by a locksmith or automotive professional.

Product Features:

• Replacement Transponder Key for Buick, Chevrolet, & GMC Vehicles with
• Contains a transponder chip for enhanced security
• Key blade ready for cutting and pairing

The Budge Rain Barrier SUV cover offers easy to use, 100% waterproof indoor and outdoor protection. This SUV car cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof SUV covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a gray color. Includes a storage bag and antenna patch. Our SUV covers are available in a variety of sizes that will fit popular makes like Jeep, Toyota, Ford, Chevrolet, GMC and much more.

Product Features:

• This SUV cover fits SUVs 210″ L x 68″ W x 60″ H
• This waterproof SUV cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
• This SUV car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
• This vehicle cover features ultrasonically welded seams for extra durability and a full elastic hem to help keep your cover secure to your SUV
• Full elastic hem to keep the cover securely on the vehicle

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

• FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
• Universal Fit
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
• 133dB @ 4″, 12V

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

• FIAMM AM80SX HIGH note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
• 133dB at 4″, 12V

The TrailFX (R) Steel liquid transfer tank is designed to be used with full size trucks. This sturdy one piece design allows you to get the greatest storage capacity. Lockable vent caps help to eliminate tampering, and heavy duty lifting loops make installation easy.

Product Features:

• Designed To Carry Diesel Non Potable Water, Or Other Non Flammable Liquids Safely
• Constructed From Heavy Duty Diamond Plate Aluminum
• Includes Lockable Cap (Must Purchase Pad Lock Separately) To Secure Transported Liquids
• Mounting Tabs Included When Necessary For Permanent Mounting (Hardware Not Included)
• Drain Plug Included To Assist With Dispersement Of Liquids
• Limited Lifetime Warranty

Dee Zee Transfer Tanks A safe and convenient means for transporting non flammable liquids. Constructed of heavy Gauge aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 3/8 Inch drainage plug and venting coupler. Tanks are intended for private use (non commercial).

Product Features:

• Made From Non-Rusting Brite-Tread Aluminum
• Perfect For Transporting Liquids
• Radius Curve Design Eliminates Key Welded Pressure Points
• Many Handy Styles To Fit Most Needs

AVS Hoodflector is a medium profile version of hood protection. The Hoodflector helps to prevent damage from road debris. It installs quickly and easily due to the custom applications for trucks, vans, SUVs and CUVs.

Product Features:

• Provides Deflection To Protect Hood, Fenders, And Windshield
• Medium Profile, Wrap-Around Design For Trucks And SUVs
• Off-The-Hood Design Allows For Easy Cleaning And Waxing
• Durable, Impact-Resistant Acrylic Construction
• Available In Dark Smoke
• Easy, No-Drill Installation

Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.

Product Features:

• Maximum protection to your hood to complement the look of your vehicle
• Precision engineered for a perfect fit to your vehicle
• Easy installation, no special hardware or drilling required – attaches with 3M automotive-grade adhesive
• Available in smoke, chrome, American flag and camo finishes
• UV and scratch-resistant while being car-wash safe

The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!

Product Features:

• Floorless design allows for set up without removing gear from the bed
• Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
• Color coded poles and pole pockets for quick and easy set up
• Water resistant fabric with tape sealed seams (PU 2000mm)
• Sky view vent for more light, ventilation, and sleeping under the stars
• All truck tents sleep (2) adults
• Includes: tent, rainfly, and stuff sack with sewn-in set up guide

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

• Saves wear and tear on your engine
• Simple installation directly into engine block

Kats Heater believes that quality is a basic requirement in the design, manufacture, and delivery of our products and services. Our quality policy is Total Customer Satisfaction in the delivery of products and services to consistently meet evolving customer expectations. We shall continuously pursue quality improvement programs that enable each employee to do his or her job right the first time and each time.

Product Features:

• Engine heater replacement cord

Need a new key fob? This DIY keyless remote is designed to match the appearance and function of the original on specific vehicle years, makes, models and configurations. With easy-to-follow instructions, you can program it yourself in minutes, and rely on it for years.

Product Features:

• Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
• Do-it-yourself solution – follow the simple onboard programming procedure in the included instructions to set up your new fob in minutes
• Durable construction – made from quality, drop-resistant components to ensure reliable performance and long service life
• Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

Need a new keyless remote? This fob is designed to look and function exactly like your original, and you don’t need to pay for expensive programming at the car dealership. This Dorman OE FIX replacement includes a patented, DIY-friendly programming tool for simple replacement. Just plug it into the OBD II port in your dashboard, follow the included instructions, and you’re good to go. Setup takes minutes, and you can rely on your new remote for years.

Product Features:

• Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
• Do-it-yourself solution – includes a patented programmer that plugs into your OBD II port to setup your new fob in minutes, without expensive dealership programming
• Matches features – this 4-button remote control features lock, unlock, remote start and panic functions
• Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry

Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.

Product Features:

• Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look
• Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
• Reliable construction – keeps moisture and debris out of internal electronics for long service life
• Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience

Cracked or wore out your key fob case? Want to add a custom look or differentiate between multiple keys? Simply install these silicone protective remote covers over your hard plastic OE remote case in seconds without any tools. Convenient and affordable, these keyless entry transmitter covers can be used to restore or enhance the look of your existing keyless remote, and the precision fit helps to keep moisture and debris out while protecting the fob from casual drops, scratches, and damage. Two silicone covers (one black, and one blue) are included in each package.

Product Features:

• Replacement or upgrade – this keyless remote cover allows you to simply cover a damaged plastic remote case, protect a new replacement case, or upgrade your current look
• Precision fit – matches dimensions of original keyless remote for specific vehicle applications for a clean look
• Reliable construction – keeps moisture and debris out of internal electronics to help extend service life, and protects the fob from casual drops, scratches, and damage
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone’s needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

• Designed To Be Installed On All Truck Beds
• Quickly Removed For A Clean Look When Not In Use
• Adjustable Width And Height For Customized Installation
• High Quality And Durable Powder Coated Finish
• 250 Pounds Capacity
• Easy Install And Can Be Mounted On Driver Or Passenger Side
• Drilling Is Required

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

GM Genuine Parts Accelerator Pedals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

This radio knob is designed to match the fit and function of the original control knob on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this radio knob is designed to match the fit and function of the original control knob on specified vehicles
• Restores functionality – this knob is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This direct replacement accelerator pedal position sensor matches the fit and performance of a failed original equipment sensor to restore proper vehicle operation. Made of quality materials for a reliable service life.

Product Features:

• Ideal replacement – this accelerator pedal position sensor matches the fit and function of the original sensor
• Plug & play installation – no special tools or programming required to install this sensor
• Trustworthy construction – engineered in North America and made from high-quality materials for long life
• Quality tested – this accelerator pedal sensor has undergone extensive testing to ensure proper function and a long service life

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

GM Genuine Parts Brake Pedal Position Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors monitor the movement or position of the brake pedal to directly activate the brake, brake lights, and turn off cruise control if applied. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The Accelerator Pedal Position (APP) sensor provides a signal identifying the location of the accelerator pedal to the engine control module. As the vehicle operator requests various degrees of torque from the engine the signal from the sensor provides the engine computer the necessary information to implement the request. The sensor provides two positive slope signals that have an offset voltage range and increase at different rates, the two signals from the sensor provide the engine computer with two unique signal inputs ensuring safety should one signal fail.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

The Am-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

• Features corrosion resistant steel housing and universal mounting bracket.
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
• Available in high and low tone
• 125 @ 4″, 12V

Seat back adjuster handle broken or missing? This replacement handle matches the fit and function of the original part to restore the seat’s function and appearance.

Product Features:

• Ideal replacement – this seat adjuster handle matches the fit and function of the original part on specified vehicle years, makes and models
• Durable construction – this handle is made from quality materials for a long service life
• Cost-effective solution – offers original equipment function at competitive price
• Quality tested – this part has undergone try-on testing to ensure a quality fit

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

GM Genuine Parts Turn Signal Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. It activates the turn signal lights on your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). Product contains Perfluorooctanoic acid (PFOA): Not for import into European Union (EU).

Product Features:

• Work with vehicle electronics to help optimize vehicle capabilities
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

SeatSaver seat covers from Covercraft solve the problem of keeping your seats clean and protected while enhancing the appearance of your vehicle’s interior. Made from a durable, heavy-duty polycotton fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. The seams are overlapped and double-stitched to provide added durability and strength. A durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and you end up with a superior fitting seat cover that will shield your seats from daily abuse and weekend adventures.

Product Features:

• Heavy duty polycotton fabric for durability and comfort
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

ACDelco GM Original Equipment Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

• Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
• ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Headlight Switch allows drivers to easily control the vehicle’s lighting system, enhancing visibility and safety by enabling quick adjustments between low beams, high beams, and fog lights as needed for varying driving conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

The Steering Wheel Radio Controls are a safety feature which allow duplicate radio operational control from the convenience of the steering wheel permitting the vehicle operator to keep their hands on the steering wheel and eyes in the vehicle operating direction.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

GM Genuine Parts Brake Pedal Position Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors monitor the movement or position of the brake pedal to directly activate the brake, brake lights, and turn off cruise control if applied. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

This seat adjustment knob is designed to match the fit and function of the original knob on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this seat adjustment knob is designed to match the fit and function of the original knob on specified vehicles
• Restores functionality – this knob is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This clutch pedal bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pedal bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

This air bag clockspring matches the fit of an original that is missing or damaged and is designed to restore current to the air bag, horn, and steering wheel-mounted controls on specified vehicles.

Product Features:

• Direct replacement – reverse-engineered to match the original clockspring on specific vehicles
• Ideal solution – engineered to ensure proper restoration of air bag system performance
• Durable construction – designed, manufactured and tested to strict specifications for reliable service
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

• Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
• Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
• Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
• Versatile component – this connector can be used in a variety of repairs and custom installations

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function