2020 GMC Car Parts

SYLVANIA Long Life miniature bulbs provide standard performance for your car or truck’s interior and exterior auxiliary lighting. Ideal for use in your car’s back up/reverse, trunk, dome lights and more, Long Life bulbs are a direct replacement for your vehicle. Designed for durability, lower maintenance, and safety in mind.

Product Features:

• DEPENDABLE: Made from high quality materials for long-lasting durability
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
• PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle s Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicle Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

You need your truck tool box to haul tools and supplies. You also need to take advantage of the full length of your truck bed to haul cargo, so a regular truck tool box just wont do. When space truck bed space comes at a premium the Dee Zee Wheel Well Box has the answer. Our Wheel Well Box takes advantage of the wasted space in your truck bed behind the wheel well. Constructed of strong Brite-Tread aluminum with a raw aluminum finish, our Wheel Well Box features the same rugged feel as our larger truck boxes- in a smaller tucked away version that leaves your bed open for hauling cargo. Lockable lift-up lid allows easy access without having to lower your tailgate. Fits 6 ft and 8 ft truck beds and is available for both driver and passenger side applications.

Product Features:

• Constructed Of Strong Brite-Tread Aluminum
• Lockable Lift Up Lid
• Sturdy Piano Hinge Lid
• Made In USA

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Universal Fitting
• Easy No Drill Installation
• Perfect Compliment Nerf Bars

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

This fuel door spring is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this fuel door spring matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

• Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
• Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
• Functionality ensured – hoist appearance may vary slightly from original part but functions the same
• Corrosion resistant – specially coated to prevent future rust and corrosion

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
• Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

• Ideal replacement – this window crank handle matches the fit and function of the original equipment component
• Durable construction – this window crank handle is made of durable material to withstand extended use
• Easy to install – this window crank requires no special tools to install
• Versatile design – this window crank handle is suitable for use in various locations in the vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for Length-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

A poorly functioning side door can be a hassle at best-and a safety hazard at worst. Now you can easily restore the side door to proper, smooth operation with our Side Sliding Door Roller Bracket.

Product Features:

• Replacement stops the grinding noise associated with worn rollers or bearings
• Direct replacement for a proper fit
• Easy to install
• Vehicle try-on testing has been conducted to ensure a trouble-free performance

This fuel door spring is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this fuel door spring matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This door check strap is designed to match the fit and function of the original strap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this door check strap is designed to match the fit and function of the original strap on specified vehicles
• Restores functionality – this check strap is made to fit and fully restore part functionality after the original strap fails
• Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

• Ideal replacement – this window crank handle matches the fit and function of the original equipment component
• Durable construction – this window crank handle is made of durable material to withstand extended use
• Easy to install – this window crank requires no special tools to install
• Versatile design – this window crank handle is suitable for use in various locations in the vehicle

A poorly functioning side door can be a hassle at best-and a safety hazard at worst. Now you can easily restore the side door to proper, smooth operation with our Side Sliding Door Roller Bracket.

Product Features:

• Replacement stops the grinding noise associated with worn rollers or bearings
• Direct replacement for a proper fit
• Easy to install
• Vehicle try-on testing has been conducted to ensure a trouble-free performance

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

• Ideal replacement – this window crank handle matches the fit and function of the original equipment component
• Durable construction – this window crank handle is made of durable material to withstand extended use
• Easy to install – this window crank requires no special tools to install
• Versatile design – this window crank handle is suitable for use in various locations in the vehicle

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:

• Classic Styling Of Brite-Tread Aluminum
• Front Or Rear Wheel Protection
• Radius Notch Contours To The Fender Well
• Protected By A BriteGard Powder Coat Finish

New Standard Replacement Rear Bumper Step Pad, For Denali Models

Product Features:

• For Denali Models, Made Of Olefinic Thermoplastic Elastomer
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated, with turn signal
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Textured Black

Replacement Mirror Glass. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• The most economical way to replace cracked Mirror glass
• Glass measures 5 1/2″ tall by 7 1/16″ wide and 8 1/4″ diagonally
• This glass DOES NOT having heating capabilities but can fit Mirrors with Manual and Heated Power functions
• Mounting tape included for low-hassle stick-on installation
• Step-by-step instructions for easy installation

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Switch is a versatile component that can control various functions such as door locks, windows, or side mirrors. Whether used for a single function or multiple operations, it offers reliable control and enhances the driver’s convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Classic Diamond Style Design
• Protected By A BriteGard Powder Coat Finish
• Compliment Brite-Tread Running Boards

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Chevy Colorado and GMC Canyon (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• High-strength carbon steel construction
• Highly rust-resistant semi-gloss black powder coat and E-coat finish
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass is power adjustable and heated, with turn signal
• OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
• Manual folding for additional clearance
• Textured Black

This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

• Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
• Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
• Functionality ensured – hoist appearance may vary slightly from original part but functions the same
• Corrosion resistant – specially coated to prevent future rust and corrosion

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

• Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
• Mirror glass to be adjusted by hand
• Manual folding for additional clearance
• Textured Black
• Superior material and manufacturing process ensures the highest quality possible

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

• Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
• Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
• Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
• Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

Anchor 2811 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1991-2021
• Weight approx: 2 Lbs
• Material: Rubber, Steel
• Height: 2.06 Inch / 52.32 Mm
• Stud: M10X1.5 1.15 Inch / 29.21 Mm

Anchor 2891 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1999-2021
• Weight approx: 4 Lbs
• With Interlock

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This Dorman OE FIX shift cable bushing kit saves expense by allowing the replacement of just the failed bushing.

Product Features:

• Convenient solution – this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
• Save time and money – save the expense and significant installation time of replacing an entire cable assembly
• Ensure fit – this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years
• Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

Anchor 3098 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2003-2020
• Weight approx: 2 Lbs
• Stud: M10X1.5
• Stud Length: 2.57 Inch / 64 Mm
• Thread Length: 0.76 Inch / 19 Mm

REUSABLE AT PAN GSKT

This Dorman Automatic Transmission Oil Cooler Gasket eliminates leaks where the oil cooler line connects to the transmission. Gasket may break down over time, causing leaks, and should be replaced any time the oil cooler line and transmission are separated.

Product Features:

• Durable construction – rubber over steel construction creates a positive seal and retains its shape
• Direct replacement – fits and functions like original equipment
• Easy to install – direct-fit, no special tools required
• Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

ABS Wheel Speed Sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle’s original components. The sensor provides this speed information to the antilock brake control module for the antilock braking function. These sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Restores ABS function and performance caused by failed wheel speed sensor
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured with GM Original Equipment specification for fit, form, and function

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

This transmission drain plug is designed to match the dimensions and function of the original plug on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this transmission drain plug matches the dimensions and function of the factory hardware on specified vehicle years, makes and models
• Ideal solution – this drain plug is a reliable replacement for an original part that is damaged or lost during service
• Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
• Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

This transmission drain plug is designed to match the dimensions and function of the original plug on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this transmission drain plug matches the dimensions and function of the factory hardware on specified vehicle years, makes and models
• Ideal solution – this drain plug is a reliable replacement for an original part that is damaged or lost during service
• Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
• Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Anchor 3249 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2011-2020
• Weight approx: 4 Lbs
• With Interlock

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).

Product Features:

• Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
• If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
• Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
• All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

• OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
• Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
• High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
• Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
• Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
• Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

• Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
• All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
• During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
• All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
• Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
• No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
• Product might not be available in all states due to local laws.

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

• Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
• All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
• During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
• All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
• Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
• No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
• Product might not be available in all states due to local laws.

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).

Product Features:

• Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
• Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
• Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
• All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:

• Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
• If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
• Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
• All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.
• With Mobil 1 Fluid

All transmissions are completely disassembled and cleaned. All cases are media-blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as necessary. All friction components are replaced with upgraded heavy-duty parts. Drum assemblies are air-checked and side play is measured to ensure proper clearance. All seals, O-rings, and gaskets are replaced. All solenoids are tested and replaced if they do not pass duty-cycle specifications. Internal wiring harnesses are inspected and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valves and valve bores are inspected, and bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.

Product Features:

• Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
• Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
• Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
• 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
• Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
• Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
• 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
• Product might not be available in all states due to local laws.

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

• Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
• All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
• During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
• All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
• Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
• No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
• Product might not be available in all states due to local laws.

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

• Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
• All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
• During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
• All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
• Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
• No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
• Product might not be available in all states due to local laws.

All transmissions are completely disassembled and cleaned. All cases are media-blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as necessary. All friction components are replaced with upgraded heavy-duty parts. Drum assemblies are air-checked and side play is measured to ensure proper clearance. All seals, O-rings, and gaskets are replaced. All solenoids are tested and replaced if they do not pass duty-cycle specifications. Internal wiring harnesses are inspected and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valves and valve bores are inspected, and bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.

Product Features:

• Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
• Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
• Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
• 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
• Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
• Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
• 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

Vehicles with automatic transmissions have a flex plate. The flex plate connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.

Product Features:

• Balanced to factory specs
• Fit and function like the original parts
• Restores normal operation

Servicing or installing a flywheel or flexplate on a General Motors LS engine with a manual or automatic transmission, Ensure a truly professional repair by replacing all the worn or broken factory bolts with this convenient package of six direct-replacement 11mm x 1.5 mounting bolts. Coated with clear zinc for corrosion resistance, with thread locker already applied, they’re precision-manufactured from strong steel for long service life.

Product Features:

• Direct replacement – these six 11mm x 1.5 flywheel bolts match the fit, function and performance of the factory fasteners
• Convenient package – package contains six bolts, the exact quantity needed for a complete repair
• Durable construction – coated with clear zinc for corrosion resistance, with thread locker already applied, and made from strong steel for long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This HVAC heater control knob is designed to match the fit and function of the original control knob on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this HVAC heater control knob is designed to match the fit and function of the original control knob on specified vehicles
• Restores functionality – this knob is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

GM Genuine Parts Accelerator Pedals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

The Brake Pedal Position sensor is similar to the Stop Light Switch but is a more critical sensor input to the vehicle stability system. The vehicle stability control module requires the exact location of the brake pedal during a vehicle skid so that a controlled brake pressure may be applied to each individual wheel in an attempt to straighten the vehicle position out and back into control.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Fia Leatherlite SL60 Series Custom Fit Seat Covers are engineered with soft touch simulated leather. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers, and head rest covers provide the finishing touches for a tailored exact fit for your vehicle.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Form fit wrap around design – multidirectional stretch trim molds to the contours of the seat
• Center armrest/console covers and head rest covers included (most applications)
• Fitment: Front bucket seats, non-removable/adjustable headrests, side airbags
• Material: Leatherette
• Color: Black w/Gray Center Panel

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

GM Genuine Parts Turn Signal Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

GM Genuine Parts Brake Pedal Position Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors monitor the movement or position of the brake pedal to directly activate the brake, brake lights, and turn off cruise control if applied. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Fia Oe30 Series Custom Fit Seat Covers feature highly durable, abrasion resistant original equipment standard tweed material. Engineered to meet or exceed vehicle manufacturer standards, the advanced design creates a state-of-the-art interior. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers and head rest covers provide the finishing touches for the OEM look.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Foam padded supports in cushion and back rest for added support
• Center armrest/console covers and head rest covers included (most applications)
• Front split seat 40/20/40, adjustable headrests, side airbags, center armrest w/cup holders, 2 storage compartments (center armrest, center cushion)
• Tweed
• Gray
• 2 Year Limited Liability

Fia Oe30 Series Custom Fit Seat Covers feature highly durable, abrasion resistant original equipment standard tweed material. Engineered to meet or exceed vehicle manufacturer standards, the advanced design creates a state-of-the-art interior. On vehicle testing ensures an exact fit for your application. Our Super-Grip slip resistant fastening system makes installation easy, with a quick release belt/buckle system, velcro and zippers (some applications). Custom formed seat belt openings, center armrest/console covers and head rest covers provide the finishing touches for the OEM look.

Product Features:

• Vehicle tested before engineering approval
• Ease of installation with Super-Grip slip resistant fastening system using quick release buckle fasteners, velcro and zippers (some applications)
• Light fast, color fast materials will not run or fade and can be hand washed
• Foam padded supports in cushion and back rest for added support
• Center armrest/console covers and head rest covers included (most applications)
• Front split seat 40/20/40, adjustable headrests, side airbags, center armrest w/cup holders, 2 storage compartments (center armrest, center cushion)
• Tweed
• Charcoal
• 2 Year Limited Liability

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Don’t let the good looks fool you. These seat covers are tough as nails with heavy duty, firm-hand Carhartt duck weave fabric and triple stitched main seams. Custom patterned for a perfect fit. Available for front, middle and rear rows.

Product Features:

• Custom patterned seat cover
• Easy to install and remove
• Machine washable
• Protect seats from work and play
• Make your seats Carhartt tough
• Machine washable

Carhartt Mossy Oak Camo SeatSaver seat covers from Covercraft keep the seats in your truck or SUV clean and protected from daily use and weekend adventures while sporting the famous Mossy Oak Break-Up Country camouflage. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment, classic Carhartt styling and the most popular camouflage available, you get seat covers that look great and protect your seats from whatever abuse you can dish out.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Famous Mossy Oak Break up Country camouflage
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Don’t let the good looks fool you. These seat covers are tough as nails with heavy duty, firm-hand Carhartt duck weave fabric and triple stitched main seams. Custom patterned for a perfect fit. Available for front, middle and rear rows.

Product Features:

• Custom patterned seat cover
• Easy to install and remove
• Machine washable
• Protect seats from work and play
• Make your seats Carhartt tough
• Machine washable

Carhartt SeatSaver custom seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Custom-Patterned Seat Cover: Designed to fit your specific vehicle’s seats, ensuring a tailored appearance
• Easy Installation and Removal: Hassle-free process for quick setup and removal when needed
• Machine Washable: Easy maintenance and cleaning, allowing you to keep them looking fresh
• Carhartt Tough: Made with iconic Duck Weave fabric, triple-stitched seams, and treated with Rain Defender DWR for durability, water resistance, and rugged style
• Heavy-Duty Protection: Shields your factory seats from work, hunting, fishing, pets, and anything else you throw at them; Not only is the fabric super durable, but it is highly water-resistant to bead away any moisture, spills, or drool from your pups

Carhartt SeatSaver seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt SeatSaver seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Carhartt SeatSaver seat covers from Covercraft are the solution to the problem of keeping the seats in your truck or SUV clean and protected from daily use and weekend adventures. Made from durable, duck-weave fabric, these custom-fit seat covers protect your seats from dirt, mud, grime, spills and more. Featuring Rain Defender technology, a durable water repellency finish is added to the fabric to make it highly water resistant. Combine these features with the custom fitment and classic Carhartt styling, you get seat covers that look great and protect your seats from whatever you throw at them.

Product Features:

• Classic Duck Weave Carhartt fabric for durability
• Custom made for your specific year, make and model seats
• Headrest and armrest covers are also included if equipped
• Easy installation and removal
• Machine washable

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
• PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
• OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

This direct replacement rear main seal cover kit matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

• Direct replacement – this rear main seal cover kit matches the factory design, and includes a new gasket, installation hardware, and an updated seal design for superior leak prevention
• Durable construction – the timing cover in this kit is made of die-cast aluminum for a leak-free fit and durability
• Convenient solution – this kit includes a new gasket and installation hardware for a complete repair
• Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

• Direct replacement – this valve cover matches the original equipment part for fit and function
• Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Made in USA. Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling high volume oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. High volume gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

• Manufactured from high quality materials for consistent durable wear
• Precision engineered for optimum fit and function
• Designed for long-life and worry-free performance
• High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues

ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Coated to help protect against premature corrosion
• Designed to match OEM calibration to provide the performance you expect from GM
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Coated to help protect against premature corrosion
• Designed to match OEM calibration to provide the performance you expect from GM
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Product Features:

• PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
• UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
• MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
• SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
• HANDLES EXTREME ENGINE CONDITIONS – Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Helps keep engine timing and fuel injection running in sync
• Helps provide proper alignment, positioning, and spacing for easy installation
• Synchronizes engine valves and pistons for excellent engine performance
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Helps keep engine running at proper temperature
• Alerts vehicle operator of high engine temperature conditions
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Steel-backed bronze alloy lining with overplate
• Popular for fatigue resistance & strength
• Provides conformability required for older apps
• Our standard material is comparable to competitors performance bearing
• Note – This material offers less resistance to wear & corrosion than other materials.
• Utilizes ISO & QS certified manufacturing

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design for Unsurpassed quality you can trust
• Validated for fit, form, and function
• Quality that you can trust
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function
• Includes all parts needed to complete the repair

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• A-Series bi-metal aluminum alloy
• Greater seizure resistance than tri-metal material
• Dramatically reduces or eliminates bearing wear
• Made with silicon to provide greater surface hardness
• Silicon particles help polish crankshaft journal to further reduce wear during operation
• Utilizes ISO & QS certified manufacturing

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• A-Series bi-metal aluminum alloy
• Greater seizure resistance than tri-metal material
• Dramatically reduces or eliminates bearing wear
• Made with silicon to provide greater surface hardness
• Silicon particles help polish crankshaft journal to further reduce wear during operation
• Utilizes ISO & QS certified manufacturing

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
• SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Application specific design to ensure a perfect fit
• Meets or exceeds all original equipment specifications
• Engineered and manufactured specifically for repair applications
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
• Validated for fit, form and function
• Unsurpassed quality you can trust

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
• SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
• REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

• Manufactured from high quality materials for consistent durable wear
• Precision engineered for optimum fit and function
• Designed for long-life and worry-free performance
• Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Includes all parts needed to complete the repair

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Includes all parts needed to complete the repair

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• A-Series bi-metal aluminum alloy
• Greater seizure resistance than tri-metal material
• Dramatically reduces or eliminates bearing wear
• Made with silicon to provide greater surface hardness
• Silicon particles help polish crankshaft journal to further reduce wear during operation
• Utilizes ISO & QS certified manufacturing

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
• QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
• ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
• INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
• COVERAGE – Available for domestic and foreign nameplate vehicles

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications