Ford Ranger Idler Pulley

Idler Pulley for a Ford Ranger

Use the fitment form at the top of the page to select your exact year and engine type for your Ford Ranger.

• 

  Litens - Idler/Tensioner Pulley - Original Equipment Quality (Part No. 900031A)

  Description

  This pulley is manufactured by Litens Automotive the original equipment part supplier and the inventor of the first automatic belt tensioner in 1979 and today the worlds largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance.
  
  Product Features:

  • Manufactured by Litens, the largest original equipment tensioner & pulley supplier in the world, to insure proper form, fit, and performance.
  • Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
  • Installation instructions included.

  5.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2020-12-19

    5

    5

    I would buy this again

    I would buy this again

    Submitted 2020-12-19

    By Darwin

    From Undisclosed

    Very inexpensive and easy to install

    Bottom Line NULL

    Very inexpensive and easy to install

    By Darwin from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2019-10-04

    5

    5

    Perfect

    Perfect

    Submitted 2019-10-04

    By Barrett

    From Undisclosed

    Perfect fit. Excellent service.

    Bottom Line NULL

    Perfect fit. Excellent service.

    By Barrett from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2017-07-11

    5

    5

    Works great!

    Works great!

    Submitted 2017-07-11

    By richard

    From undisclosed

    Same as factory on my 97 GMC, Also has a lifetime warranty.

    Bottom Line NULL

    Same as factory on my 97 GMC, Also has a lifetime warranty.

    By richard from undisclosed

    BOTTOM LINE NULL

  from $21.99

  View Product
• 

  Litens - Idler/Tensioner Pulley - Original Equipment Quality (Part No. 900022A)

  Description

  This Litens pulley is manufactured by one of the largest original equipment pulley supplier to insure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction.
  
  Product Features:

  • Manufactured by one of the largest original equipment part suppliers in the world to insure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.

  5.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 4

    4

    2020-12-16

    4

    4

    Best Price I could Find !

    Best Price I could Find !

    Submitted 2020-12-16

    By Harold

    From Undisclosed

    Great Fit, Best Price I could Find. If you are Ditching the air pump too you can simply use a Continental 4060965 or equivalent belt (96.5") and a slightly modified belt path than stock. No Need For a Air Pump Pulley. Wish the pulley was metal, but everything is plastic these days.

    Bottom Line NULL

    Great Fit, Best Price I could Find. If you are Ditching the air pump too you can simply use a Continental 4060965 or equivalent belt (96.5") and a slightly modified belt path than stock. No Need For a Air Pump Pulley. Wish the pulley was metal, but everything is plastic these days.

    By Harold from Undisclosed

    BOTTOM LINE NULL

  • 4

    4

    2020-12-16

    4

    4

    More likely .

    More likely .

    Submitted 2020-12-16

    By Mario

    From Undisclosed

    It probably better than dayco, because I have use dayco and it don t last long about 2 year the most. So do not buy dayco idley pulley. On a mustang gt engine.

    Bottom Line NULL

    It probably better than dayco, because I have use dayco and it don t last long about 2 year the most. So do not buy dayco idley pulley. On a mustang gt engine.

    By Mario from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-06-29

    5

    5

    Yes

    Yes

    Submitted 2020-06-29

    By John

    From Undisclosed

    Bolted Wright on ,

    Bottom Line NULL

    Bolted Wright on ,

    By John from Undisclosed

    BOTTOM LINE NULL

  from $22.99

  View Product
• 

  Dayco - Idler Pulley (Part No. 89020)

  Description

  Dayco No Slack Idler/Tensioner Pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and therefore longer belt life. This pulley includes lifetime lubricated ball bearings and double high temperature seals to assure peak bearing performance, the most critical element of a pulley's service life. This specific V-Belt driven, steel pulley contains a specially formulated e-coating, comparable to OE plating that resists corrosion and wear resistance under harsh environments.
  
  Product Features:

  • Lifetime lubricated ball bearings
  • Double high temperature seals to assure peak bearing performance
  • V-Belt, steel pulley that contains a specially formulated e-coating, comparable to OE plating that resists corrosion and wear resistance under harsh environments
  • Meets or exceeds OE quality

  5.0

  Read 1 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2019-11-24

    5

    5

    Works fine.

    Works fine.

    Submitted 2019-11-24

    By SteveS

    From Huntsville, AL

    I had left a previous review that the tensioner pulley was defective and began squealing. It was not the pulley - it was the belt. Evidently if there are slight misalignments in the pulleys, or if the belt rides on the points of the belt teeth, it can squeal. You can diagnose by simply spraying water on the grooved surface of one of the belt pulleys. If the squealing stops, it's the belt, not a pulley bearing.

    Bottom Line recommended

    I had left a previous review that the tensioner pulley was defective and began squealing. It was not the pulley - it was the belt. Evidently if there are slight misalignments in the pulleys, or if the belt rides on the points of the belt teeth, it can squeal. You can diagnose by simply spraying water on the grooved surface of one of the belt pulleys. If the squealing stops, it's the belt, not a pulley bearing.

    By SteveS from Huntsville, AL

    BOTTOM LINE recommended

  from $18.99

  View Product
• 

  Dayco - Idler Pulley (Part No. 89015)

  Description

  Dayco No Slack Idler/Tensioner Pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and therefore longer belt life. Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance, the most critical element of a pulley's service life. This specific "grooved", serpentine belt driven pulley contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant "plastic" pulley.
  
  Product Features:

  • Lifetime lubricated ball bearings
  • Double high temperature seals to assure peak bearing performance
  • Grooved pulley that contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant "plastic" pulley
  • Meets or exceeds OE quality

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2020-11-29

    5

    5

    would buy again

    would buy again

    Submitted 2020-11-29

    By james

    From Undisclosed

    worked perfect and fixed the squeek

    Bottom Line NULL

    worked perfect and fixed the squeek

    By james from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-09-15

    5

    5

    I would buy this again.

    I would buy this again.

    Submitted 2020-09-15

    By Brian

    From Undisclosed

    Working good so far.

    Bottom Line NULL

    Working good so far.

    By Brian from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-07-13

    5

    5

    Id buy this part daily

    Id buy this part daily

    Submitted 2020-07-13

    By Kk's Childcare

    From Collinsville Va

    Gets me where i needa be

    Bottom Line recommended

    Gets me where i needa be

    By Kk's Childcare from Collinsville Va

    BOTTOM LINE recommended

  from $19.99

  View Product
• 

  Dayco - Idler Pulley (Part No. 89026)

  Description

  Dayco No Slack Idler/Tensioner Pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and therefore longer belt life. Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance, the most critical element of a pulley's service life. This specific "flat", serpentine belt driven steel pulley contains a specially formulated e-coating, comparable to OE plating that resists corrosion and wear resistance under harsh environments.
  
  Product Features:

  • Lifetime lubricated ball bearings
  • Double high temperature seals to assure peak bearing performance
  • Flat, steel pulley that contains a specially formulated e-coating, comparable to OE plating that resists corrosion and wear resistance under harsh environments
  • Meets or exceeds OE quality

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 4

    4

    2020-05-26

    4

    4

    Fit perfectly

    Fit perfectly

    Submitted 2020-05-26

    By Thomas

    From Undisclosed

    I had to replace a failing water pump in our 2000 Saturn SL2, and toward the end of the job noticed that the idler pulley bearing had some noticeable play in it. Thinking that this was a clear indication of impending problems, I bought this pulley to replace it while I had an easy opportunity to do so. It fit perfectly, and I gave it "4 stars" only because it will be a few years before I'll know if it lasts as long as I'm hopeful it will.

    Bottom Line NULL

    I had to replace a failing water pump in our 2000 Saturn SL2, and toward the end of the job noticed that the idler pulley bearing had some noticeable play in it. Thinking that this was a clear indication of impending problems, I bought this pulley to replace it while I had an easy opportunity to do so. It fit perfectly, and I gave it "4 stars" only because it will be a few years before I'll know if it lasts as long as I'm hopeful it will.

    By Thomas from Undisclosed

    BOTTOM LINE NULL

  • 1

    1

    2018-05-31

    1

    1

    DO NOT BUY!!!

    DO NOT BUY!!!

    Submitted 2018-05-31

    By Steven

    From undisclosed

    HORRIBLE. 3rd one that has failed in a week.

    Bottom Line NULL

    HORRIBLE. 3rd one that has failed in a week.

    By Steven from undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2018-03-07

    5

    5

    I would buy again and recommend it

    I would buy again and recommend it

    Submitted 2018-03-07

    By Larry

    From undisclosed

    On Saturn 2001

    Bottom Line NULL

    On Saturn 2001

    By Larry from undisclosed

    BOTTOM LINE NULL

  from $17.99

  View Product
• 

  Litens - Idler/Tensioner Pulley - Original Equipment Quality (Part No. 900027A)

  Description

  This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the worlds largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance.
  
  Product Features:

  • Manufactured by Litens, the largest original equipment tensioner & pulley supplier in the world, to insure proper form, fit, and performance.
  • Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
  • Installation instructions included.

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2021-01-17

    5

    5

    Great

    Great

    Submitted 2021-01-17

    By James

    From Undisclosed

    Love it

    Bottom Line NULL

    Love it

    By James from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-12-28

    5

    5

    Perfect fit

    Perfect fit

    Submitted 2020-12-28

    By Christopher

    From Undisclosed

    Perfect fit

    Bottom Line NULL

    Perfect fit

    By Christopher from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-12-23

    5

    5

    Perfect fit

    Perfect fit

    Submitted 2020-12-23

    By Duane

    From Undisclosed

    Quality item

    Bottom Line NULL

    Quality item

    By Duane from Undisclosed

    BOTTOM LINE NULL

  from $18.99

  View Product
• 

  Litens - Idler/Tensioner Pulley - Original Equipment Quality (Part No. 900052A)

  Description

  This Litens pulley is manufactured by one of the largest original equipment pulley supplier to insure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction.
  
  Product Features:

  • Manufactured by one of the largest original equipment part suppliers in the world to insure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2020-12-18

    5

    5

    I will buy party again and again thank you

    I will buy party again and again thank you

    Submitted 2020-12-18

    By Carlos

    From Undisclosed

    100% satisfied with the quality of the part

    Bottom Line NULL

    100% satisfied with the quality of the part

    By Carlos from Undisclosed

    BOTTOM LINE NULL

  • 1

    1

    2020-12-08

    1

    1

    Do not buy for 1997 Camaro Z28.

    Do not buy for 1997 Camaro Z28.

    Submitted 2020-12-08

    By Paul

    From Undisclosed

    This does not fit the OEM serpentine belt tensioner on a 1997 Camaro Z28.

    Bottom Line NULL

    This does not fit the OEM serpentine belt tensioner on a 1997 Camaro Z28.

    By Paul from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-11-11

    5

    5

    Perfect

    Perfect

    Submitted 2020-11-11

    By Matthew

    From Undisclosed

    Perfect fit, perfect replacement.....same manufacturer as factory.

    Bottom Line NULL

    Perfect fit, perfect replacement.....same manufacturer as factory.

    By Matthew from Undisclosed

    BOTTOM LINE NULL

  from $20.99

  View Product
• 

  Dayco - Idler Pulley (Part No. 89001)

  Description

  Dayco No Slack Idler/Tensioner Pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and therefore longer belt life. Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance, the most critical element of a pulley's service life. This specific "flat", serpentine belt driven pulley contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant "plastic" pulley.
  
  Product Features:

  • Lifetime lubricated ball bearings
  • Double high temperature seals to assure peak bearing performance
  • Flat pulley that contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant "plastic" pulley
  • Meets or exceeds OE quality

  3.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.5

  3.5

  • 5

    5

    2020-07-04

    5

    5

    yeah

    yeah

    Submitted 2020-07-04

    By jason

    From Undisclosed

    good

    Bottom Line NULL

    good

    By jason from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2020-01-19

    5

    5

    Yes

    Yes

    Submitted 2020-01-19

    By Gary

    From Undisclosed

    Fit exactly

    Bottom Line NULL

    Fit exactly

    By Gary from Undisclosed

    BOTTOM LINE NULL

  • 1

    1

    2020-01-11

    1

    1

    Idler pulley

    Idler pulley

    Submitted 2020-01-11

    By Rgbigdog

    From Virginia

    I have a 1992 F-150 2WD 5.0 engine. Needed a new Idler arm tensioner pulley. They said it was an exact fix for my truck W/AC. It was not. I had to make shims so that it would fit. The back needed a 1.8mm shim to keep it from rubbing the housing. The front needed a 2mm shim and a 1.7mm washer to fill the space between the bearing and shim so the bolt and front plate when tighten would not be jamming the pulley and keeping it from spinning. I would not recommend this to anyone unless you like making shims.

    Bottom Line not recommended

    I have a 1992 F-150 2WD 5.0 engine. Needed a new Idler arm tensioner pulley. They said it was an exact fix for my truck W/AC. It was not. I had to make shims so that it would fit. The back needed a 1.8mm shim to keep it from rubbing the housing. The front needed a 2mm shim and a 1.7mm washer to fill the space between the bearing and shim so the bolt and front plate when tighten would not be jamming the pulley and keeping it from spinning. I would not recommend this to anyone unless you like making shims.

    By Rgbigdog from Virginia

    BOTTOM LINE not recommended

  from $14.99

  View Product
• 

  Dayco - Idler Pulley (Part No. 89013)

  Description

  Dayco No Slack Idler/Tensioner Pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and therefore longer belt life. Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance, the most critical element of a pulley's service life. This specific "grooved", serpentine belt driven pulley contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant "plastic" pulley.
  
  Product Features:

  • Lifetime lubricated ball bearings
  • Double high temperature seals to assure peak bearing performance
  • Grooved pulley that contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant "plastic" pulley
  • Meets or exceeds OE quality

  from $15.99

  View Product
• 

  Litens - Belt Tensioning Pulley Assembly - Original Equipment Quality (Part No. 900165A)

  Description

  This pulley is manufactured by Litens Automotive - inventor of the first automatic belt tensioner in 1979 and today the worlds largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada and meets all performance and durability requirements. Applications include Ford Ranger vehicles. Complete belt tensioning assembly - includes new bracket and pulley..
  
  Product Features:

  • Manufactured by the world's largest Original Equipment supplier of accessory drive tensioners and pulleys.
  • Complete assembly - pulley mounted to adjustable bracket. Pre-assembled pulleys save installation time and insure that all components are assembled to original specifications for both installation and performance
  • Glass Reinforced thermoplastic for optimized dimensional control and running surface durability.
  • Precise dimensional tolerance for smooth operation and long life
  • Service free sealed ball bearing. Molded -in ball bearing for optimal fit and long life

  from $57.99

  View Product
• 

  Litens - Tensioning Pulley Assembly - Original Equipment Quality (Part No. 900166A)

  Description

  This pulley is manufactured by Litens Automotive - inventor of the first automatic belt tensioner in 1979 and today the worlds largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada and meets all performance and durability requirements. Applications include Ford Ranger vehicles. Complete belt tensioning assembly - includes new bracket and pulley..
  
  Product Features:

  • Manufactured by the world's largest Original Equipment supplier of accessory drive tensioners and pulleys.
  • Complete assembly - pulley mounted to adjustable bracket. Pre-assembled pulleys save installation time and insure that all components are assembled to original specifications for both installation and performance
  • Glass Reinforced thermoplastic for optimized dimensional control and running surface durability.
  • Precise dimensional tolerance for smooth operation and long life
  • Service free sealed ball bearing. Molded -in ball bearing for optimal fit and long life

  from $53.99

  View Product
• 

  ACDelco - Original Equipment Accessory Belt Idler Pulley (Part No. G6020204976ACD)

  Description

  Built to look and fit like the original GM part, ACDelco Professional Automotive Belt Tensioners and Pulleys are an ideal replacement for worn equipment. The perfect complement to our full line of belts.
  
  Product Features:

  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.

  from $41.38

  View Product
• 

  ACDelco - Acc. Belt Tension Pu (Part No. G6011314893ACD)

  from $39.47

  View Product
• 

  Motorcraft - Accessory Belt Idler Pulley (Part No. G6020360511MTR)

  Description

  Motorcraft Belt Tensioners are manufactured with premium quality in mind
  
  Product Features:

  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific - no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company

  from $33.21

  View Product
• 

  Litens - Idler/Tensioner Pulley - Original Equipment Quality (Part No. 900066A)

  Description

  This Litens pulley is manufactured by one of the largest original equipment pulley supplier to insure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel pulley preassembled on a steel mounting bracket for Ford applications.
  
  Product Features:

  • Manufactured by one of the largest original equipment part suppliers in the world to insure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.

  from $30.99

  View Product
• 

  Litens - Idler/Tensioner Pulley - Original Equipment Quality (Part No. 900060A)

  Description

  This pulley is manufactured by one of the largest original equipment pulley supplier to insure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel pulley preassembled on a steel mounting bracket.
  
  Product Features:

  • Manufactured by one of the largest original equipment part suppliers in the world to insure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.

  from $28.99

  View Product
• 

  ACDelco - Acc. Belt Tension Pu (Part No. G6011603984ACD)

  from $25.51

  View Product
• 

  Dorman - Idler Pulley (Part No. G6011707669DOR)

  Description

  (Pulley Only) Dorman's Belt Tensioner Pulley is engineered to maintain tension on the serpentine belt for the life of the belt--thereby keeping the alternator charging, the water pump running, and the power steering pump and A/C compressor operating properly. They feature a high-quality double-sealed bearing to resist damage from contaminants. Replacement prevents belt slip and eliminates squeak, squeal or groaning noise associated with a worn belt tensioner pulley.
  
  Product Features:

  • Steel or plastic construction for long-lasting durability against heat, shock and corrosion
  • Replacement stops squeak, squeal or groaning noise associated with a worn Belt Tensioner Pulley
  • Direct replacement for a proper fit every time
  • Vehicle try-on testing and rigorous materials testing to ensure high-quality performance

  from $23.14

  View Product
• 

  Litens - Idler/Tensioner Pulley - Original Equipment Quality (Part No. 900521A)

  Description

  This Litens pulley is supplied by one of the largest automotive pulley suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the Original Equipment (O.E.) pulley, the Litens replacement part is constructed of heavy duty steel for long life and trouble free performance. This pulley is manufactured for both O.E. and aftermarket applications.
  
  Product Features:

  • Manufactured by one of the world's largest Original Equipment supplier of accessory drive tensioners and pulleys.
  • Heavy Duty Steel Pulley
  • Precision steel stamping with close tolerance ball bearing pocket.
  • Electro-deposited coating (e-coat) for superior corrosion resistance.
  • Running surface designed and engineered for proper belt tracking.
  • 70mm O.D.; 17mm I.D; 28mm width; ribbed running surface for a 6-rib serpentine belt ; high-grade steel construction.

  from $21.99

  View Product
• 

  Litens - Idler/Tensioner Pulley - Original Equipment Quality (Part No. 900024A)

  Description

  This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the worlds largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance.
  
  Product Features:

  • Manufactured by Litens, the largest original equipment tensioner & pulley supplier in the world, to insure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.

  from $19.99

  View Product
• 

  Litens - Idler/Tensioner Pulley - Original Equipment Quality (Part No. 900048A)

  Description

  This Litens pulley is manufactured by one of the largest original equipment pulley supplier to insure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction.
  
  Product Features:

  • Manufactured by one of the largest original equipment part suppliers in the world to insure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.

  from $19.99

  View Product
• 

  Dayco - Acc. Belt Idler Pull (Part No. G6020926315DAY)

  Description

  The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.
  
  Product Features:

  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.

  from $19.24

  View Product
• 

  Dayco - Premium Accessory Belt Idler Pulley (Part No. G60201221078DAY)

  Description

  The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.
  
  Product Features:

  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.

  from $17.10

  View Product
• 

  Dorman - TECHoice - Idler Pulley (Pulley Only) (Part No. 419-644)

  Description

  This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
  
  Product Features:

  • Direct replacement - this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
  • Restores performance - fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific - reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality - backed by team of engineers and quality specialists in the United States

  from $16.99

  View Product
• 

  Gates - Belt Drive Pulley (Part No. 38008)

  Description

  Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.
  
  Product Features:

  • Additional hardware included with most idler pulleys to make installation easier.
  • Original Equipment (OE) Exact - Looks and fits just like the OE
  • Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements
  • Steel or thermoplastic construction provides high durability for extended life
  • Industry's best light-duty coverage and consistently first to market for late model application coverage
  • Vibration damping system extends life of tensioner and other accessory components
  • Reliable operation under severe conditions

  from $16.49

  View Product