Ford F-350 Super Duty Wheels and Tires

Essential Ford F-350 Super Duty Wheels and Tires

COAST TO COAST – Fits 16"Wheels, Front And Rear, Ss, Push On, 8 Lug/ 4 Hand Hole Wheels, Set Of 4 (Part No.IWCN816X)

Fits 16"Wheels, Front And Rear, Ss, Push On, 8 Lug/ 4 Hand Hole Wheels, Set Of 4

from

$422.99
Coast to Coast International wheel simulators and trim rings, also known as beauty rings, come in a variety of sizes. Manufactured to withstand the rigors of a work truck, simulators are available in high quality automotive grade ABS plastic or T304 stainless steel. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • Designed And Manufactured To Match OEM Styling
  • Constructed From High-Quality, Durable, 304 Stainless Steel Or Automotive Grade ABS
  • Work In Conjunction With OEM Center Caps
  • Installs In Minutes With No Required Tools Or Lug Nut Removal Required
See More

KAI – Wheel Housing (Part No.RRP1794)

Wheel Housing

from

$127.99
New Standard Replacement Driver Side Rear Inner Wheel Housing, For Single Rear Wheel Trucks Only

Product Features:
  • For Single Rear Wheel Trucks Only, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)

TPMS Ni Plated Valve Core, 100 Pack

from

$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
  • DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Dill Air Control – TPMS Banded Sensor Cradle (Part No.1025)

TPMS Banded Sensor Cradle

from

$5.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • Metal cradle: holds 1048 and 1048-HP sensors
See More

Driveworks – Oil Seal (Part No.S-4160)

Oil Seal

from

$5.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece (Part No.VS-925A)

Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece

from

$8.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
  • 0.453″ rim hole compatiblity
  • 200 PSI maximum cold inflation pressure
See More

Dorman – Exhaust Manifold Har (Part No.H1012691100DOR)

Exhaust Manifold Har

from

$37.78
Exhaust Manifold Har

Carquest Premium – HUB BEARING (Part No.94-729980)

HUB BEARING

from

$44.99
HUB BEARING

VDO REDI-Sensor – VDO Rubber Snap-in Stem REDI-Sensor (Part No.SE10001HPR)

VDO Rubber Snap-in Stem REDI-Sensor

from

$49.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:
  • Installs right out of the box
  • No sensor programing required
  • Works with all major TPMS scan tools
  • No training required – designed to follow existing OE vehicle relearn procedures
  • Faster TPMS scan tool hunt mode
  • Reduces SKUs
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Dill Air Control – Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece (Part No.VS-20)

Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece

from

$3.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits and tools.

Product Features:
  • TPMS Snap-in stem for GM, Ford
  • Includes stepped screw.
  • 0.453″ rim hole compatibility
  • 80 PSI maximum cold inflation pressure
See More

McGard – Cone Seat- Under the Hub Cap Wheel Lock Set (M14 x 2.0 Thread Size) – Set of 4 Locks and 1 Key (Part No.24024)

Cone Seat- Under the Hub Cap Wheel Lock Set (M14 x 2.0 Thread Size) - Set of 4 Locks and 1 Key

from

$45.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For use under wheel covers, center caps and hub caps.
See More

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers

from

$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:
  • MX-Sensor Components
  • 4 Metal Valves
  • 4 Rubber Valves
  • Rubber Gasket (2×10 pcs)
  • Screw Nut (2×10 pcs)
  • Washer (2×10 pcs)
  • Metal Valve Cap (2X10 pcs)
  • Rubber Valve Cap (2X10 pcs)
  • Valve Core (2X10 pcs)
See More

Dorman – Wheel Center Hub Cap (Part No.909-035)

Wheel Center Hub Cap

from

$60.99
This wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles.
  • Restores functionality – reliable replacement for an original cap that is missing or damaged due to collision.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Schrader – TPMS Sensor Service Kit (Part No.20018)

TPMS Sensor Service Kit

from

$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
  • DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Dill Air Control – TPMS Service Kit: Plastic Clip For Locking Band Sensor On Cradle, 20 Piece (Part No.1026)

TPMS Service Kit: Plastic Clip For Locking Band Sensor On Cradle, 20 Piece

from

$3.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • Plastic clip for locking band sensor on cradle
See More

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-382-A)

Tapered Cup Wheel Bearing Assembly

from

$7.79
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

COAST TO COAST – 16 Inch, Chrome Plated, Plastic, Set Of 4, Spring Steel Clip (Part No.IWC9416AC)

16 Inch, Chrome Plated, Plastic, Set Of 4, Spring Steel Clip

from

$98.99
Coast to Coast International Wheel Covers are a quick and cost effective alternative to replacing factory OEM wheel covers that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • Designed And Manufactured To Fit Steel Wheels And Emulate OEM Designs
  • Constructed From High-Quality, Durable, Automotive Grade ABS
  • Two Layers Of Clear Coat Enhance And UV Protect The Finish
  • A Cost Effective Alternative To Replace OEM Wheel Covers That Have Been Lost, Stolen Or Worn Over Time
  • Installs In Minutes Without Tools
  • Spring steel clip retention, Easier to install, better wheel retention
See More

Carquest Premium – HUB BEARING (Part No.94-690421)

HUB BEARING

from

$121.99
HUB BEARING

Dorman – 19.5 X 6 In. Steel Wheel (Part No.939-190)

19.5 X 6 In. Steel Wheel

from

$509.99
Damaged your wheel, or looking to upgrade? This wheel is specifically designed to directly replace the original wheel on certain vehicle applications. It is thoroughly tested to meet safety standards for reliable performance.

Product Features:
  • Direct replacement – this wheel is designed to match the fit and structural appearance of the original wheel on specific vehicle years, makes and models.
  • Cost-effective solution – offers original equipment quality and appearance for a competitive price.
  • Thoroughly tested – dynamic radial testing, radial run-out testing, and axial run-out testing ensures performance
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

COAST TO COAST – Chrome Plated, Abs Plastic, Set Of 4 (Part No.IWCC3338)

Chrome Plated, Abs Plastic, Set Of 4

from

$104.99
Coast to Coast International aftermarket center caps are a quick and cost effective alternative to replacing OEM center caps that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • Designed And Manufactured To Fit Directly Into The OEM Wheel
  • Constructed From High-Quality, Durable, Automotive Grade ABS
  • Two Layers Of Clear Coat Enhance And UV Protect The Finish
  • A Cost Effective Alternative To Replace OEM Center Caps That Have Been Lost, Stolen Or Worn Over Time
  • Installs In Minutes Without Tools And Stays Securely Attached Until Removed
See More

Dorman – Wheel Stud: Serrated, M14-1.50 Thread Size, Right Hand Thread (Sold by each) (Part No.610-509)

Wheel Stud: Serrated, M14-1.50 Thread Size, Right Hand Thread (Sold by each)

from

$6.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Dorman – Wheel Nut Chrome Standard M14-1.50 (Part No.711-834)

Wheel Nut Chrome Standard M14-1.50

from

$8.99
Our Wheel Lug Nuts are designed and constructed to strict engineering quality standards. All of or Wheel Lug Nuts are manufactured with high corrosion resistance to combat rust in any environment.

Product Features:
  • Wheel Nut Chrome Standard M14-1.50, Hex 21mm, Length 16.36mm
  • Wheel Nut Chrome Standard M14-1.50
  • Our Wheel Lug Nuts are designed and constructed to strict engineering quality standards. All of or Wheel Lug Nuts are manufactured with high corrosion resistance to combat rust in any environment.
  • Direct replacement for a proper fit every time
  • Available in different quantities and packaging options
See More

Dorman – Wheel Lug Nut: M14-1.50 Thread, Flanged, 0.913" Length, Black (Sold by each) (Part No.611-246)

Wheel Lug Nut: M14-1.50 Thread, Flanged, 0.913" Length, Black (Sold by each)

from

$5.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Continental – Wheel Band for Valveless TPMS Sensor (Part No.SE57720)

Wheel Band for Valveless TPMS Sensor

from

$25.99
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
See More

Dorman – Front Hub Seal Shield Kit (Part No.600-233)

Front Hub Seal Shield Kit

from

$125.99
This wheel hub dust shield kit directly replaces a corroded set of original equipment shield components on certain vehicle applications. It ensures the front hub seal remains protected from dirt and debris to prevent leaks.

Product Features:
  • Direct replacement – this wheel hub dust shield kit matches the fit and function of the original equipment components on specific vehicle years, makes and models.
  • Durable design – corrosion-resistant construction protects hub from dirt, debris and moisture.
  • Convenient kit – includes all necessary components for a complete repair
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Helping You Find the Right Wheels and Tires for Your Ford F-350 Super Duty

You love your F-350 Super Duty. So we’ve made it easier than ever to help you find Ford F-350 Super Duty Wheels and Tires in our online catalog. Our inventory holds 298 aftermarket and OEM Wheels and Tires for your Ford F-350 Super Duty, ranging from $2.99 to $7,321.99.

We offer parts from 30 brands trusted to make quality Wheels and Tires for your Ford F-350 Super Duty. Before you buy, take some time to read through customer reviews. We currently have 210,768 reviews of Ford F-350 Super Duty Wheels and Tires from previous customers. Some of the top rated parts include VDO Metal Clamp-in Stem REDI-Sensor with 4.5 stars and Wheel Bearing and Hub Assembly with 4.0 stars.

Find your F-350 Super Duty Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford F-350 Super Duty part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Wheels and Tires Brands for Your Ford F-350 Super Duty

Our inventory holds Wheels and Tires for your Ford F-350 Super Duty from 30 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, Autel, and Schrader, all of which can keep that Ford happy.
We have Koyo parts available for your Ford F-350 Super Duty in categories like Wheel Bearings. Some of the top-rated Koyo parts in these categories are:
Wheel Bearing
from $23.84
(1)
Wheel Bearing
Rear Wheel Bearings

Top-Rated Continental Wheels and Tires

Leading Continental Wheels and Tires

We carry Continental brand parts for your Ford F-350 Super Duty across several catalog categories, including TPMS Sensors. Some of our most reviewed Continental parts include:
Wheel Band for Valveless TPMS Sensor
from $23.99
(2555)
Wheel Band for Valveless TPMS Sensor
Tire Pressure Sensor Mounting Bands

FAQs for Ford F-350 Super Duty Wheels and Tires

What are the most purchased Wheels and Tires for the Ford F-350 Super Duty?

Out of 298 Wheels and Tires for the Ford F-350 Super Duty, the most popular in our inventory are:
MX-Sensor 1-Sensor (Rubber)
from $41.99
This product is not rated
MX-Sensor 1-Sensor (Rubber)
Tire Pressure Sensors
Wheel Nut M14-2.0 Flanged Flat Face - 21mm Hex, 22.6mm Length (Sold by each)
from $3.49
This product is not rated
Wheel Nut M14-2.0 Flanged Flat Face – 21mm Hex, 22.6mm Length (Sold by each)
Wheel Lug Nuts

What are the top-rated Ford F-350 Super Duty Wheels and Tires?

Top-rated Wheels and Tires for your Ford F-350 Super Duty based on customer reviews/ratings are:
VDO Metal Clamp-in Stem REDI-Sensor
from $48.99
(54)
VDO Metal Clamp-in Stem REDI-Sensor
“It works perfectly ! Will buy again for my Acura MDX Thanks to advanceautoparts.”
Wheel Bearing and Hub Assembly
from $152.99
(51)
Wheel Bearing and Hub Assembly
“Easy to install, took about 2 hours mostly trying to get the old one off. Good value for the price.”
Hub and Bearing Assembly
from $537.99
(43)
Hub and Bearing Assembly
“installed fine”