Ford F-250 Cooling and Climate Controls

Essential Ford F-250 Cooling and Climate Controls

Carquest Premium – Multi Purpose Relay (Part No.RAA1235)

Multi Purpose Relay

from

$10.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T38901)

A/C Block Type O-Ring Expansion Valve

from

$23.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

KAI – HVA/C Heater Core (Part No.HTR010050)

HVA/C Heater Core

from

$64.99
New Standard Replacement Front Heater Core, Replaces Copper/Brass Unit

Product Features:
  • Replaces Copper/Brass Unit, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Edelbrock – Water Pump for Ford 429/460 in Polished Finish (Part No.8876)

Water Pump for Ford 429/460 in Polished Finish

from

$526.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

KAI – A/C Evaporator Core (Part No.EVA010197)

A/C Evaporator Core

from

$144.99
New Standard Replacement A/C Evaporator Core

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A/C Compressor Clutch, 8 Groove (Part No.ACQ010013)

A/C Compressor Clutch, 8 Groove

from

$139.99
New Standard Replacement A/C Compressor Clutch, 8 Groove

Product Features:
  • 8 Groove
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Factory Air – System Mounted Cycling Pressure Switch (Part No.35960)

System Mounted Cycling Pressure Switch

from

$18.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

KAI – A/C Hose Assembly (Part No.HOS010278)

A/C Hose Assembly

from

$74.99
New Standard Replacement A/C Manifold Hose Assembly, V8 Engine

Product Features:
  • V8 Engine
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Filter Drier (Part No.T33366)

A/C Filter Drier

from

$28.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – HVAC Temperature Control Switch Connector (Part No.PTA2069)

HVAC Temperature Control Switch Connector

from

$36.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Factory Air – Green Round O-Ring (Part No.24615)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Motorad – Thermostat Kit-192 Degrees w/ Gasket (Part No.4876KT)

Thermostat Kit-192 Degrees w/ Gasket

from

$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1369)

A/C Compressor Clutch Connector

from

$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Mr. Gasket – Water Neck (Part No.2664)

Water Neck

from

$30.19
Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.

Product Features:
  • Complete with gasket and mounting bolts
  • Chrome plated
See More

Santech – Air Conditioning O-Ring Kit (Part No.R1151317282SII)

Air Conditioning O-Ring Kit

from

$14.57
Air Conditioning O-Ring Kit

Carquest Premium – HVAC Vacuum Closed Non-Bypass Heater Valve (Part No.T74612)

HVAC Vacuum Closed Non-Bypass Heater Valve

from

$15.99
Carquest Heater Control Valves are application specific and tested to ensure proper fit and function to maintain your vehicle’s heater is functioning to OEM standards.
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Flex A Lite – 400 Series Nylon Flex Fan (Part No.418)

400 Series Nylon Flex Fan

from

$34.99
400 Series Nylon Flex Fan

Motorcraft – Original Equipment Radiator Cap (Part No.G1010415176MTR)

Original Equipment Radiator Cap

from

$10.79
The Motorcraft Original Equipment Radiator Cap is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • Standard and safety vent radiator pressure caps available
  • Extensive coverage for most cars and trucks, as well as farm and construction equipment
  • Swivel-seal radiator caps are designed to provide increased durability and can be removed without damage to the rubber atmospheric seal
  • Zinc-plated to resist corrosion and rust
  • Pressure valve springs are made of stainless steel to maintain calibrated pressure throughout the service life
  • Rubber pressure valve gasket resists high temperatures and deterioration from coolant and additives
  • Pressure and vacuum relief features help extend radiator and hose life
  • Prevent accidental cap removal with positive low-pressure stop feature
See More

Carquest Premium – A/C Liquid Line Hose Assembly w/ Serviceable Orifice Tube (Part No.T56105)

A/C Liquid Line Hose Assembly w/ Serviceable Orifice Tube

from

$44.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Vemo – Blower Motor Resistor (Part No.R2032300727VMO)

Blower Motor Resistor

from

$36.51
The Vemo Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:
  • Excellent electrical and thermal performance
  • Direct OE replacement
  • Built to strict quality control standards
  • 100% tested
See More

Dorman – Clutch Fan Blade: Plastic, Cost Effective And Reliable (Part No.620-156)

Clutch Fan Blade: Plastic, Cost Effective And Reliable

from

$67.99
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

Product Features:
  • Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade
  • Quality construction – manufactured from premium materials for a long service life
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Ford F-250 Cooling and Climate Controls Categories

Helping You Find the Right Cooling and Climate Controls for Your Ford F-250

You love your F-250. So we’ve made it easier than ever to help you find Ford F-250 Cooling and Climate Controls in our online catalog. Our inventory holds 338 aftermarket and OEM Cooling and Climate Controls for your Ford F-250, ranging from $0.99 to $703.99.

We offer parts from 31 brands trusted to make quality Cooling and Climate Controls for your Ford F-250. Before you buy, take some time to read through customer reviews. We currently have 51,909 reviews of Ford F-250 Cooling and Climate Controls from previous customers. Some of the top rated parts include Multi-Purpose O-Ring with 4.7 stars and Severe Temp Automatic Adjusting Orifice Tube with 4.7 stars.

Find your F-250 Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford F-250 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Cooling and Climate Controls Brands for Your Ford F-250

Our inventory holds Cooling and Climate Controls for your Ford F-250 from 31 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Permatex, and Motorad UltraStats, all of which can keep that Ford happy.
We have Koyo Cooling parts available for your Ford F-250 in categories like Engine Cooling Parts. Some of the top-rated Koyo Cooling parts in these categories are:
Radiator
from $280.98
(1)
Radiator
Radiators

Top-Rated Carquest Premium Cooling and Climate Controls

Leading Carquest Premium Cooling and Climate Controls

We carry Carquest Premium brand parts for your Ford F-250 across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Carquest Premium parts include:
Standard Thermostat: 195 Degrees
from $9.99
(107)
Standard Thermostat: 195 Degrees
Thermostats
Radiator: With Transmission Oil Cooler
from $209.99
(98)
Radiator: With Transmission Oil Cooler
Radiators
A/C Blue Orifice Tube
from $4.99
(97)
A/C Blue Orifice Tube
Expansion Valve and Orifice Tubes

FAQs for Ford F-250 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the Ford F-250?

Out of 338 Cooling and Climate Controls for the Ford F-250, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Standard Thermostat: 180 Degrees
from $9.99
(36)
Standard Thermostat: 180 Degrees
Thermostats

What are the top-rated Ford F-250 Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your Ford F-250 based on customer reviews/ratings are:
Multi-Purpose O-Ring
from $9.99
(110)
Multi-Purpose O-Ring
“Seals up well”
Severe Temp Automatic Adjusting Orifice Tube
from $15.99
(97)
Severe Temp Automatic Adjusting Orifice Tube
“Perfect fit in my f150. Works great.”
Engine Water Pump: New, Gasket/Seals Included
from $57.99
(64)
Engine Water Pump: New, Gasket/Seals Included
“For fixed my truck”