Ford Aerostar Performance and Racing Products

Essential Ford Aerostar Performance and Racing Products

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

Differential Pinion Solid Spacer Kit w/Shims

from

$22.79


Product Features:
  • FORD 9″ SOLID SPACER KIT
See More

Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

Remote Oil Filter Kit

from

$97.99
This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

Product Features:
  • Relocate oil filter to an easy access location
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Accel – Ford Tfi Mdltr 84-93 W/Grease (Part No.35369)

Ford Tfi Mdltr 84-93 W/Grease

from

$103.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1984 thru 1993.

Product Features:
  • Fits Most Stock And Modified Distributors
  • Dwell Control Circuit
  • Resists False Triggering
See More

Energy Suspension – TransMt (Part No.4.1148R)

TransMt

from

$72.99
TransMt

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1035)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$82.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2024)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$74.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Dorman – Clutch Fan Blade: Plastic, Cost Effective And Reliable (Part No.620-112)

Clutch Fan Blade: Plastic, Cost Effective And Reliable

from

$43.49
Replace your damaged cooling fan blade with this direct replacement. This vehicle-specific application is engineered for a perfect fit and is made from quality materials to ensure durability and restore proper cooling system operation.

Product Features:
  • Direct replacement – this engine cooling fan blade fits and functions like the original equipment fan blade.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)

Preloaded Performance Programmer for Increased Horsepower & Torque

from

$456.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

Product Features:
  • Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
  • Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
  • Reads and clears DTC (Diagnostic Trouble Codes) with ease.
  • Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
  • Full color LCD display
  • High-speed data logging/monitoring
  • Dual analog inputs
  • Most popular vehicles supported
  • Installs quickly and easily
  • Easy restoration back to stock
  • User adjustable vehicle parameters
  • USB Interface cable included
  • Product might not be available in all states due to local laws.
See More

Mallory – Distributor Drive Gear (Part No.29432)

Distributor Drive Gear

from

$103.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.

Product Features:
  • Replacement Distributor Gear
See More

Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

Ford 1984-98 Eec-Iv Supercoil

from

$77.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)

Coil; Street Fire; Ford TFI

from

$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Bolt-on Performance
  • Factory replacement coil
See More

Powertrax – Lock Right Locker (Part No.1822-LR)

Lock Right Locker

from

$371.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Motive Gear – Differential Mini Spool (Part No.MS88-28)

    Differential Mini Spool

    from

    $98.99


    Product Features:
    • MINI SPOOL 8.8 FORD 28SPL
    See More

    Richmond Gear – MiniSpool (Part No.78-8831-1)

    MiniSpool

    from

    $151.99
    MiniSpool

    Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

    High Performance 180 Degree Thermostat for Increased Flow

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens At 180 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Accel – Distributor Cap And Rotor Kit (Part No.8230)

    Distributor Cap And Rotor Kit

    from

    $108.99


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Helping You Find the Right Performance and Racing Products for Your Ford Aerostar

    You love your Aerostar. So we’ve made it easier than ever to help you find Ford Aerostar Performance and Racing Products in our online catalog. Our inventory holds 30 aftermarket and OEM Performance and Racing Products for your Ford Aerostar, ranging from $22.79 to $456.99.

    We offer parts from 12 brands trusted to make quality Performance and Racing Products for your Ford Aerostar. Before you buy, take some time to read through customer reviews. We currently have 1,174 reviews of Ford Aerostar Performance and Racing Products from previous customers. Some of the top rated parts include Coil; Street Fire; Ford TFI with 4.3 stars and Unilite Ignition Module with 5.0 stars.

    Find your Aerostar Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Aerostar part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

    Top Performance and Racing Products Brands for Your Ford Aerostar

    Our inventory holds Performance and Racing Products for your Ford Aerostar from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like Mr. Gasket, Accel, and Dorman, all of which can keep that Ford happy.

    Top-Rated Accel Performance and Racing Products

    Leading Accel Performance and Racing Products

    We carry Accel brand parts for your Ford Aerostar across several catalog categories, including Performance Ignition Products and Performance Distributors. Some of our most reviewed Accel parts include:
    Ford 1984-98 Eec-Iv Supercoil
    from $77.99
    (28)
    Ford 1984-98 Eec-Iv Supercoil
    Performance Coils
    Distributor Cap And Rotor Kit
    from $108.99
    (8)
    Distributor Cap And Rotor Kit
    Performance Distributor Cap and Rotor Kits
    Ford Tfi Modulator 1983-96
    from $96.99
    (3)
    Ford Tfi Modulator 1983-96
    Performance Ignition Modules

    FAQs for Ford Aerostar Performance and Racing Products

    What are the most purchased Performance and Racing Products for the Ford Aerostar?

    Out of 30 Performance and Racing Products for the Ford Aerostar, the most popular in our inventory are:
    High Performance 180 Degree Thermostat for Increased Flow
    from $26.99
    (20)
    High Performance 180 Degree Thermostat for Increased Flow
    Performance Engine Coolant Thermostats
    Clutch Fan Blade: Plastic, Cost Effective And Reliable
    from $43.49
    (17)
    Clutch Fan Blade: Plastic, Cost Effective And Reliable
    Universal Performance Radiator Fan Blades
    Preloaded Performance Programmer for Increased Horsepower & Torque
    from $456.99
    (1)
    Preloaded Performance Programmer for Increased Horsepower & Torque
    Computer Chip Programmers

    What are the top-rated Ford Aerostar Performance and Racing Products?

    Top-rated Performance and Racing Products for your Ford Aerostar based on customer reviews/ratings are:
    Coil; Street Fire; Ford TFI
    from $65.99
    (12)
    Coil; Street Fire; Ford TFI
    “Replaced the original equipment coil in a 1989 town car with the msd coil. The car no longer misfires. It now idles smooth and never stalls.I would re”
    Unilite Ignition Module
    from $85.29
    (3)
    Unilite Ignition Module
    “I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
    Ford Tfi Mdltr 84-93 W/Grease
    from $103.99
    (1)
    Ford Tfi Mdltr 84-93 W/Grease
    “ought this to get a little proformance, lasted about 2 mounths. left me with a 150$ tow bill.”