Ford Aerostar Parts

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels. The Transmission Pressure Control Solenoid controls the flow of fluid in the various hydraulic circuits.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Precision-wound coated copper windings increase product durability and life cycle.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure product reliability, every time.

TransMt

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

The Shift Interlock Solenoid is a safety feature which prevents a gear shift change in an automatic transmission without first stepping on the brake pedal. The shift interlock solenoid meets all original equipment operating characteristics and mounting requirements.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

These replacement automatic transmission shift lever control rod bushings have been made to match the function and performance of the original bushings on select vehicle years, makes and models.

Product Features:

• Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
• Conveniently fix- simple solution to address worn bushings and restore original performance and feel
• Application specific – reverse engineered from the original design on certain vehicle years, makes and models
• Trustworthy quality – backed by team of engineers and quality specialists in the United States

All transmissions are completely disassembled and cleaned. All cases are media-blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as necessary. All friction components are replaced with upgraded heavy-duty parts. Drum assemblies are air-checked and side play is measured to ensure proper clearance. All seals, O-rings, and gaskets are replaced. All solenoids are tested and replaced if they do not pass duty-cycle specifications. Internal wiring harnesses are inspected and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valves and valve bores are inspected, and bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.

Product Features:

• Each transmission undergoes rigorous dyno testing to verify precise hydraulic pressures, smooth shifting, torque converter function, and park lock operation-guaranteeing reliable, trouble-free driving.
• Every transmission is fully disassembled, cleaned, and rebuilt using 100% upgraded heavy-duty seals, friction components, solenoids, and torque converter parts to ensure maximum durability and performance.
• Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, oft.rings and gaskets are replaced.
• 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
• Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
• Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and oft.rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
• 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
• Product might not be available in all states due to local laws.

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

This automatic transmission shift tube lever pin is designed to match the fit and function of the original pin on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this automatic transmission shift tube lever pin is designed to match the fit and function of the original pin on specified vehicles
• Restores functionality – this pin is made to fit and fully restore part functionality after the original pin fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN — Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

AT SOLENOID SEAL

AT MASTER REPAIR KIT

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

AUTO TRANS BAND

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This automatic transmission shift tube bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this automatic transmission shift tube bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

A/T FLYWHEEL BOLT

This automatic transmission shift tube bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this automatic transmission shift tube bushing matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission cooler reinstallation kit
• Contains part numbers 248001, 226201, 240250 and 4 hose clamps
• Provides all hardware for reinstallation of Imperial transmission coolers
• Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
• Made of high grade nylon for easy installation
• Removable buttons for cooler/fan relocation
• Made for both transmission coolers and electric fan installation
• Comes with Quick Connect coupler

These replacement automatic transmission shift lever control rod bushings have been made to match the function and performance of the original bushings on select vehicle years, makes and models.

Product Features:

• Direct replacement – these replacement auto trans shift lever control rod bushings match the original equipment design on specified vehicles
• Conveniently fix- simple solution to address worn bushings and restore original performance and feel
• Application specific – reverse engineered from the original design on certain vehicle years, makes and models
• Trustworthy quality – backed by team of engineers and quality specialists in the United States

FLYWHEEL SHIM

FLYWHEEL SHIM

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• Concentric Slave Cylinders are engineered to perform in even the most demanding driving conditions and are crafted with the highest quality materials and undergo rigorous testing to meet or exceed OEM standards.
• LuK Concentric Slave Cylinders work seamlessly in hydraulic clutch systems and plays a crucial role in transmitting hydraulic pressure to the clutch release system. This precise control ensures smooth operation of the clutch.
• LuK Clutch Slave Cylinders are a high quality replacement that¿meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is¿designed for optimal performance¿and to extend the life of the clutch..
• LuK Clutch Slave Cylinders are a high quality replacement that┐meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is┐designed for optimal performance┐and to extend the life of the clutch..
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
• Whether navigating city streets or tackling rugged terrain, drivers can trust LuK Concentric Slave Cylinders to deliver consistent clutch performance when it matters most.

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• Concentric Slave Cylinders are engineered to perform in even the most demanding driving conditions and are crafted with the highest quality materials and undergo rigorous testing to meet or exceed OEM standards.
• LuK Concentric Slave Cylinders work seamlessly in hydraulic clutch systems and plays a crucial role in transmitting hydraulic pressure to the clutch release system. This precise control ensures smooth operation of the clutch.
• LuK Clutch Slave Cylinders are a high quality replacement that¿meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is¿designed for optimal performance¿and to extend the life of the clutch..
• LuK Clutch Slave Cylinders are a high quality replacement that┐meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is┐designed for optimal performance┐and to extend the life of the clutch..
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
• Whether navigating city streets or tackling rugged terrain, drivers can trust LuK Concentric Slave Cylinders to deliver consistent clutch performance when it matters most.

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

• BUILT TO LAST – Advanced heat treatment process for strength
• PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

LuK: The brand professionals trust. For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet clutch components. Each set contains everything you need to get the job done right. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Enjoy a light, comfortable pedal that stays consistent over the clutch’s life.
• Find the perfect LuK clutch engineered for your specific car or light commercial vehicle.
• Kits include everything needed for a quick, correct fit and reliable clutch performance.

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• At the core of every LuK Clutch Master Cylinder lies a dedication to precision engineering. Each cylinder is meticulously designed and manufactured to exacting standards, ensuring seamless integration with the vehicle’s clutch system.
• LuK employs advanced materials and manufacturing techniques to optimize the performance of their master cylinders, resulting in smooth and precise clutch engagement in every driving situation.
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
• The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
• Where required LuK Master Cylinders have a peak torque limiter. It reduces the volume flow in the hydraulic system during sport driving. This prevents overloading the powertrain from sudden starts, like when slipping off the clutch pedal.

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• At the core of every LuK Clutch Master Cylinder lies a dedication to precision engineering. Each cylinder is meticulously designed and manufactured to exacting standards, ensuring seamless integration with the vehicle’s clutch system.
• LuK employs advanced materials and manufacturing techniques to optimize the performance of their master cylinders, resulting in smooth and precise clutch engagement in every driving situation.
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
• The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
• Where required LuK Master Cylinders have a peak torque limiter. It reduces the volume flow in the hydraulic system during sport driving. This prevents overloading the powertrain from sudden starts, like when slipping off the clutch pedal.

Manufactured with premium materials, National needle bearings are designed and engineered to meet OE specifications.

Product Features:

• RIGHT TYPE – Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
• PREMIUM MATERIALS – Precision manufactured using high-quality materials for outstanding durability and performance
• OE-STYLE DESIGN – Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
• Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• Brand may vary by location

LuK rigid flywheels, a smart alternative to resurfacing,¿offer a smooth, flat surface crucial for proper clutch operation, are engineered and manufactured to OE specifications, and are dynamically balanced to eliminate vibration and increase clutch performance

Product Features:

• Every component, including the ring gear, is engineered and manufactured to Original Equipment (OE) specifications.
• LuK flywheels are always new and never remanufactured.
• LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance.
• LuK’s engineering and quality materials contribute to a longer service life for the flywheel and clutch system.
• Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:

• Balanced to factory specs
• Fit and function like the original parts
• Restores normal operation

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:

• Balanced to factory specs
• Fit and function like the original parts
• Restores normal operation

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

• For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
• The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
• Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
• Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
• Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

• For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
• The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
• Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
• Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
• Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Manufactured to meet or exceed original equipment specs
• Eliminates grinding from damaged teeth
• Increases starter drive life

The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.

Product Features:

• Manufactured to meet or exceed original equipment specs
• Eliminates grinding from damaged teeth
• Increases starter drive life

The release system is the connection between pedal and clutch and it has a decisive influence on the driving experience. To ensure that the clutch is easy to operate and that the power flow can be safely metered, all components of the release system must work perfectly together. Under its LuK brand, Schaeffler has played a decisive role in the development of hydraulic clutch actuation technology. LuK offers all components of the release system as spare parts for the independent market in case of a defect, with OE quality.

Product Features:

• Concentric Slave Cylinders are engineered to perform in even the most demanding driving conditions and are crafted with the highest quality materials and undergo rigorous testing to meet or exceed OEM standards.
• LuK Concentric Slave Cylinders work seamlessly in hydraulic clutch systems and plays a crucial role in transmitting hydraulic pressure to the clutch release system. This precise control ensures smooth operation of the clutch.
• LuK Clutch Slave Cylinders are a high quality replacement that¿meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is¿designed for optimal performance¿and to extend the life of the clutch..
• LuK Clutch Slave Cylinders are a high quality replacement that┐meets or exceeds OE specifications. This clutch slave cylinders focus on quality and reliability is┐designed for optimal performance┐and to extend the life of the clutch..
• LuK products are equipped with an integrated travel sensor where needed. This senses the position of the clutch pedal. This is important for start-stop systems and functions like electric parking brake, hill-start and speed control.
• Whether navigating city streets or tackling rugged terrain, drivers can trust LuK Concentric Slave Cylinders to deliver consistent clutch performance when it matters most.

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive
• Backed By A Limited Lifetime Warranty

AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a .

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Design
• Easy Installation With No-Drilling Or Special Hardware Required
• Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
• Made From Durable, Impact-Resistant Acrylic
• Available In Dark Smoke And Chrome Finishes

The Range 3 Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

• Saves wear and tear on your engine
• Simple installation directly into engine block

Lower Radiator Hose Heater

Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:

• Available for all size engines
• Equipped with check valve
• Fits most liquid cooled engines
• Installations easier and simpler
• New lower radiator hose connectors

Autocraft Easy Fit minivan cover offers superior protection for your vehicles. The fabric which is soft, breathable and with water repellent coating does not only prevent your vehicles from scratching but also protect against mold and mildew. It designed with a full elastic, double stitched hem and reinforced grommets to ensure a better and secure fit. Bag included for convient storage.

Product Features:

• Fit minivanss 16ft-17.6ft (4.8m-5.3m)
• Lightweight, breathable, non-abrasive fabric
• Water repellent coating, protects against mold and mildew
• Full elastic and double stitched hem to ensure a better fit
• 2 built-in reinforced grommets and 1 rope are included to keep your cover in place
• Antenna hole patch included to to provide additional protection from water or dust soak into the hole that you cut for antenna to pass through.
• Bag included for easy storage

For those who like traditional woven fabrics for indoor car cover protection, the Tan Flannel is the perfect choice. This is a high performance indoor fabric with a durable Polycotton blend on the outside and a flannel underside soft napped finish. Its long wearing and breathable. Specially treated to repel moisture and resist rot and mildew.

Product Features:

• A favorite amongst car enthusiasts
• Flannel lined for an ultra-soft, paint-friendly cover
• Constructed from all cotton based materials
• Our ‘classic’ indoor cover

The Ultra van cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight van car cover is comprised of 3 layers of polypropylene. Our Ultra car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch.

Product Features:

• This van cover fits mini vans 216″ L x 60″ W x 60″ H
• This van cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
• This van cover is water resistant and features ultrasonically welded seams for extra durability
• Cover is suitable for short term outdoor protection and long-term indoor protection
• Full elastic hem to keep the cover securely on the vehicle

The WeatherTech All Weather Floor Mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Our proprietary engineered odorless resin ensures that these mats will not curl, crack or harden in sub zero weather. Our All Weather Floor Mats also have anti skid ridges to prevent shifting in your vehicle and come with a protective, non stick finish to make cleanup quick and easy. WeatherTech All Weather Floor Mats are manufactured in America to ISO 9001 standards, and also meet FMVSS302 standards your assurance of quality. Choose from Black, Tan or Grey to complement virtually any interior color. Available for cars, trucks, minivans and SUVs. All Weather Floor Mats were intended to give the best possible protection for your vehicle floor.

Product Features:

• Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
• They Won t Curl, Crack Or Harden In Sub Zero Weather
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor

All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:

• Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
• Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable
• Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy
• All Weather Floor Mats Were Intended To Give The Best Possible Protection For Your Vehicle Floor

All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:

• Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
• They Won t Curl, Crack Or Harden In Sub Zero Weather
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat
• Manufactured In America To ISO 9001 Standards, And Also Meet FMVSS302 Standards-Your Assurance Of Quality

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

• Capacity: 15 cu ft
• Dimensions: 42″ L x 34″ W x 18″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

The Rightline Gear Sport 3 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 3 is one of the largest car top bags on the market.

Product Features:

• Capacity: 18 cu ft
• Dimensions: 48″ L x 36″ W x 18″ H
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Designed for SUVs and minivans, WITH or WITHOUT a roof rack
• Enclosed front end helps fit your gear to the size of the carrier and prevents overfilling.
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:

• FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
• Universal Fit
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
• 133dB @ 4″, 12V

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

• Use To Install All Classic, Challenger Or Signature Series Wheels
• Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
• ISO/ TS Certified
• Designed To Mount Our Wheel To Your Rig
• Use with all Grant Classic/Challenger/Signature Steering Wheels

VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:

• Made of soft elegant rich velour
• Custom made to fit each dashboard
• Hook & loop fasteners included for easy & secure installation
• Cuts hazardous windshield glare
• Protects dashboard from sun damage stopping cracks and warping
• Passenger-side airbag opening included where applicable

This manual transmission shift knob is designed to match the fit and function of the original shift knob on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this manual transmission shift knob is designed to match the fit and function of the original shift knob on specified vehicles
• Restores functionality – this knob is made to fully restore appearance and functionality after the original part fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Pedal cover worn out or missing- This brake pedal pad is a direct replacement for a cracked, worn or missing pad, restoring a safe gripping surface to the brake pedal for safety and comfort.

Product Features:

• Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover
• Durable materials – this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver’s shoe
• Easy installation – this pad slides onto the brake pedal and requires no special tools or hardware
• Quality tested – this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle’s application

This air bag clock spring matches the fit of an original that is missing or damaged and is designed to restore current to the air bag, horn, and steering wheel-mounted controls on specified vehicles.

Product Features:

• Direct replacement – reverse-engineered to match the original clock spring on specific vehicles
• Ideal solution – engineered to ensure proper restoration of air bag system performance
• Durable construction – designed, manufactured and tested to strict specifications for reliable service
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The airbag clockspring is one piece of the passenger restraint system. The restraint airbag located in the driver’s steering wheel is hardwired, meaning the airbag has a directly wired connection to the vehicle passenger restraint module. The clockspring is located within the steering column just below the airbag assembly and contains a spirally wound flat ribbon conductor within it. As the steering wheel is rotated during normal driving conditions the electrical connection between the air bag and the restrain module remains complete.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 83″.

Product Features:

• Easy to install
• Will fit many custom applications
• Low cost alternative

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 120″.

Product Features:

• Easy to install
• Will fit many custom applications
• Low cost alternative

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

These universal horn accessories are ideal for applications requiring a horn where a horn was not originally provided or to replace a horn where the application no longer is available.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

The Am-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:

• Features corrosion resistant steel housing and universal mounting bracket.
• FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
• Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
• FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
• Available in high and low tone
• 125 @ 4″, 12V

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Our parts are 100% tested to verify both mechanical and electrical switching performance.
• Decades of industry leading research and development focused on meeting the technician’s needs
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Pedal Position Switch detects the position of the accelerator pedal, providing essential input to the vehicle¿s engine control unit for optimal performance and efficient fuel management. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes Cable Lube
• Plastic sheath protects cable from debris and water
• Comes ready to install

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit And function just like the original part to ensure durability And long life.

Product Features:

• Includes Cable Lube
• Plastic sheath protects cable from debris and water
• Comes ready to install