Dodge Viper Brake Parts

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

Goodyear brake pads are specifically formulated to ensure low noise, low dust braking while maintaining maximum stopping effectiveness, control, and durability. We use a patented Vulcan Braid Shims technology to eliminate noise and provide a more comfortable ride – Slots and Chamfers that match OE specifications are used to reduce vibration and brake fade. Goodyear Brakes always puts a quality powder coated finish on every brake pad for maximum weather & corrosion protection. Premium hardware kits are included where required.

Product Features:

• Braid Shim Technology – We use a patented Vulcan Braid Shim technology to eliminate noise and provide a more comfortable ride. Slots and Chamfers that match OE specifications are used to reduce vibration and brake fade
• Prolong The Life of Your Disc Brakes – The Front brake pads are powder-coated finish for increased weather & corrosion protection. Combined with semi-metallic material, pads have a higher temperature tolerance and produce less brake dust
• The Best of Safety and Durability – Goodyear Brakes is committed to passenger’s safety. These semi-metallic brake pads will provide your car with maximum stopping power and consistently even braking
• Hardware Kit Included – Each set of front brake pads includes a premium hardware kit for easy installation. Warranty of 3 years or 36,000 miles of use, whichever comes first

Brembo brake pads reflect the brand’s racing heritage and engineering excellence, delivering the ideal balance of performance, safety, and comfort for every driving style. Designed with carefully selected friction materials, they provide reliable braking across a wide variety of vehicles, from daily commuters to performance cars and commercial vehicles. Every vehicle deserves Brembo. Supplying original equipment brakes to leading automakers worldwide, Brembo brings the same precision, quality, and performance found in factory-installed brakes to every aftermarket pad. Precision-engineered chamfered edges and slotted to reduce noise, enhance comfort, and improve cooling for consistent performance. Multi-layer anti-noise and anti-vibration shims further minimize vibration and harshness, ensuring a quiet, smooth ride even under demanding conditions. Brembo’s advanced scorch treatment ensures stable friction and consistent braking behavior. Combined with rigorous testing and quality control, these pads deliver confident stopping power, extended durability, and maximum safety in all driving situations, reflecting the high standards expected from the global leader in braking systems.

Product Features:

• Low Dust Formulation: Utilizes a Brembo engineered, application specific friction material designed to match the performance needs of each vehicle, minimizing brake dust to keep wheels cleaner longer
• Quiet & Comfortable: Features chamfered edges, precision slotting, and multi-layer anti-noise shims to effectively reduce noise and vibration, delivering a quieter, more comfortable braking experience
• Durable: Features a corrosion resistant coated backing plate and pre-burnished surface for smooth break-in and extended pad life.
• OE Replacement: Engineered to meet or exceed original equipment specifications, providing precise fit, consistent performance, and reliable braking that ensures Brembo level safety and confidence in every stop

Brembo brake pads reflect the brand’s racing heritage and engineering excellence, delivering the ideal balance of performance, safety, and comfort for every driving style. Designed with carefully selected friction materials, they provide reliable braking across a wide variety of vehicles, from daily commuters to performance cars and commercial vehicles. Every vehicle deserves Brembo. Supplying original equipment brakes to leading automakers worldwide, Brembo brings the same precision, quality, and performance found in factory-installed brakes to every aftermarket pad. Precision-engineered chamfered edges and slotted to reduce noise, enhance comfort, and improve cooling for consistent performance. Multi-layer anti-noise and anti-vibration shims further minimize vibration and harshness, ensuring a quiet, smooth ride even under demanding conditions. Brembo’s advanced scorch treatment ensures stable friction and consistent braking behavior. Combined with rigorous testing and quality control, these pads deliver confident stopping power, extended durability, and maximum safety in all driving situations, reflecting the high standards expected from the global leader in braking systems.

Product Features:

• Low Dust Formulation: Utilizes a Brembo engineered, application specific friction material designed to match the performance needs of each vehicle, minimizing brake dust to keep wheels cleaner longer
• Quiet & Comfortable: Features chamfered edges, precision slotting, and multi-layer anti-noise shims to effectively reduce noise and vibration, delivering a quieter, more comfortable braking experience
• Durable: Features a corrosion resistant coated backing plate and pre-burnished surface for smooth break-in and extended pad life.
• OE Replacement: Engineered to meet or exceed original equipment specifications, providing precise fit, consistent performance, and reliable braking that ensures Brembo level safety and confidence in every stop

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:

• Dependable stopping power
• Single layer shim for quiet braking
• OE-designed slots and chamfers to reduce noise and vibration
• Powder-coated backing plate prevents corrosion

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

This automotive brake hydraulic hose was precision engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

• Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles.
• Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
• Quality assured – materials tested to exacting government-regulated safety and durability standards
• Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

This automotive brake hydraulic hose was precision engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

• Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles.
• Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
• Quality assured – materials tested to exacting government-regulated safety and durability standards
• Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

This automotive brake hydraulic hose was precision engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

• Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles.
• Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
• Quality assured – materials tested to exacting government-regulated safety and durability standards
• Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

This brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this brake master cylinder reservoir cap gasket is designed to match the fit and function of the original gasket on specified vehicles
• Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this brake master cylinder cap is designed to match the fit and function of the original cap on specified vehicles
• Restores functionality – reliable replacement for an original part that is missing or failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:

• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
• Plastic reservoirs are vacuum-tested to ensure they are leak free.

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

• Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
• Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
• All aluminum castings are “hard anodized”
• All iron castings are coated to prevent rust
• Manufacturers all major components in house.
• Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
• All machining done by computer programed CNC machines.
• Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
• Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
• Assembly is done in clean room insuring no contamination is introduced into final assembly.
• All assemblies are dated coded for 100% accurate trace-ability.
• Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance