Cadillac DeVille Parts

Cadillac DeVille Body Parts

Carquest Premium – Door Window Switch Connector (Part No.PTE2046)

Door Window Switch Connector

from

$134.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
See More

KAI – Undercar Shield (Part No.GM1091117)

Undercar Shield

from

$46.99
New Standard Replacement Undercar Shield

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

AISIN – Power Window Regulator Assembly without Motor (Part No.RPGM-080)

Power Window Regulator Assembly without Motor

from

$98.99
AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.

Product Features:
  • 100% new with many improvements from factory design.
  • Designed and manufactured to meet OE standards.
  • Strict quality control to ensure perfect fit.
See More

KAI – Deck Lid Seal (Part No.GMK403570378)

Deck Lid Seal

from

$89.99
New Goodmark Trunk Weatherstrip

Product Features:
  • Made Of Rubber
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Window Switch (Part No.SBA4578)

Door Window Switch

from

$116.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Switch is a versatile component that can control various functions such as door locks, windows, or side mirrors. Whether used for a single function or multiple operations, it offers reliable control and enhances the driver’s convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1405)

Multi-Use Connector

from

$41.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2137)

Multi-Use Connector

from

$35.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Headlight Switch (Part No.SAC3029)

Headlight Switch

from

$137.99
The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Dorman – Door Latch Assembly (Part No.940-107)

Door Latch Assembly

from

$82.99
This deck lid latch is designed to match the fit and function of the original latch on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this deck lid latch is designed to match the fit and function of the original latch on specified vehicles
  • Restores functionality – this latch is made to fully restore part functionality after the original latch fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2398)

Multi-Use Connector

from

$21.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Help – Exterior Door Handle Front Left (Part No.81313)

Exterior Door Handle Front Left

from

$72.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Plastic Housing, Trunk Lid Release (Part No.747-001)

Plastic Housing, Trunk Lid Release

from

$110.99
This trunk release motor housing is designed to match the fit and function of the original housing on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this trunk release motor housing is designed to match the fit and function of the original housing on specified applications
  • Restores functionality – reliable replacement for an original motor housing that has cracked or failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Metro Mould – Body Seal Kit (Part No.RKB 2009-110)

Body Seal Kit

from

$481.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro Basic Weatherstrip Kits are designed with parts matched to meet and exceed the specifications of the original part. Basic Kit, for Convertibles. Door (LM 20) Roof Rail (RR 1813-C) Trunk (TK 46-18), Seals. This basic kit from Metro includes the matched door seals and roof rails, along with the trunk seal to keep the elements out of your convertible. Additional important weather seals and detail rubber parts are also available from Metro for many classic and late model vehicles.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Dorman – Help – Window Rollers (Part No.74430)

Window Rollers

from

$9.99
This window regulator roller is designed to match the fit and function of the original roller on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this window regulator roller is designed to match the fit and function of the original part on specified vehicles
  • Restores functionality – reliable replacement for a roller that has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

GM Genuine Parts – Trunk Lid Pull Down Motor (Part No.25809368)

Trunk Lid Pull Down Motor

from

$393.99
GM Genuine Parts Trunk Lid Pull Down Motor Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These motors help close your trunk properly. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

StrongArm – Hood Lift Support: 24.0" Ext Length, 8.55" Travel, 93 Lbs of Force, 1 Pk (Part No.C4793)

Hood Lift Support: 24.0" Ext Length, 8.55" Travel, 93 Lbs of Force, 1 Pk

from

$24.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.799-105)

Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In

from

$5.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Panel Trim Retainer – Interior – GM (sold by each) (Part No.700-330)

Panel Trim Retainer - Interior - GM (sold by each)

from

$1.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest Premium – Door Lock Kit (Part No.DLC1167)

Door Lock Kit

from

$24.99
Application matched component to ensure the system can be returned to like new condition.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Dorman – Panel Trim Retainer, Interior, GM/Ford/Chrysler (Sold by each) (Part No.700-365)

Panel Trim Retainer, Interior, GM/Ford/Chrysler (Sold by each)

from

$0.99
Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service.
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77002)

Windflector - Classic, Window, Fits Up To 34.25" Wide Sunroofs, Smoke, Outside Mount, 1 Pc

from

$59.99
Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:
  • The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
  • Prevents The Rain From Entering The Sunroof Opening While Driving
  • Helps Reduce Heat Buildup Inside The Vehicle
  • Available In 5 Different Sizes For Perfect Fit
  • No Drill Installation
  • Installs Quickly And Easily With 3M Automotive-Grade Adhesive
See More

Needa Parts – Door Striker Bolt, 1/2-13 In. (Part No.38420)

Door Striker Bolt, 1/2-13 In.

from

$15.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)

Door Hinge Bushing Assortment - 4 Sizes

from

$8.99
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Window Regulator Tape (Part No.74403)

Window Regulator Tape

from

$22.99
This window regulator tape is designed to match the fit and function of the original tape on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this window regulator tape is designed to match the fit and function of the original tape on specified vehicles
  • Restores functionality – reliable replacement for damaged or missing tape
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Door Jamb Switch (Part No.SAA1213)

Door Jamb Switch

from

$6.49
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Jam Switch detects whether a vehicle door is open or closed, enhancing safety by triggering interior lights and warning systems to prevent accidents or potential damage while driving. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Cadillac DeVille Transmission Parts

Carquest Premium – Neutral Safety Switch (Part No.SBE4517)

Neutral Safety Switch

from

$94.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Neutral Safety Switch prevents the engine from starting unless the transmission is in neutral or park, enhancing safety by reducing the risk of accidental movement while starting the vehicle. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

ATP – Automatic Transmission Universal Detent Cable 28 to 48 inches (Part No.Y-754)

Automatic Transmission Universal Detent Cable 28 to 48 inches

from

$45.99
ATP Universal Fit Detent Cables are designed to cover many applications and are no compromise replacement parts

Product Features:
  • Includes brackets, grommets, etc to match original
  • Fits many GM transmissions
  • Adjustable
See More

Edelbrock – Automatic Trans Cable Adapter #8026 for GM 2004R, 700R4, 4L60 Transmissions (Part No.8026)

Automatic Trans Cable Adapter #8026 for GM 2004R, 700R4, 4L60 Transmissions

from

$19.99
Product Features:
  • Edelbrock Part # 8026 GM Transmission adapter is for use with 2004R, 700R4, 4L60 transmissions.
  • This kit relocates the pin position on an Edelbrock Carburetor when hooking up to a throttle valve style transmission (700R4, 2004R, 4L60).
  • The pin location is critical as the TV controls line pressure, shift points, shift firmness, and part throttle downshifts.
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Tapered Roller Bearing

from

$7.99
Product Features:
  • Brand may vary by location
See More

Pro-King – Automatic Transmission Basic Rebuild Kit (Part No.KB-838)

Automatic Transmission Basic Rebuild Kit

from

$141.99
This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:
  • Does not include steels or filter
See More

ATP – AT SEAL (Part No.SO-39)

AT SEAL

from

$5.99
AT SEAL

GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT1626)

Multi-Purpose Pigtail

from

$65.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

B & M – Governor Recalibration Kit For TH-700R4, TH-400 and TH-350 Transmission (Part No.20248)

Governor Recalibration Kit For TH-700R4, TH-400 and TH-350 Transmission

from

$125.99
This kit allows you to adjust the shift points of your transmission after it is installed in your vehicle. The Governor Recalibration Kit is very useful if you have a vehicle that is very light; has a low rear-end gear ratio.

Product Features:
  • Adjust Shift Points Of Transmission
  • Useful For Light Vehicles
  • For Low Rear End Gear Ratio
  • Or Useful If It Is Conversion
See More

ATP – AT OIL PUMP ORING (Part No.SO-21)

AT OIL PUMP ORING

from

$8.99
AT OIL PUMP ORING

National – Multi-Purpose Bearing (Part No.A-2)

Multi-Purpose Bearing

from

$15.99
Product Features:
  • CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
  • PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
  • OE-STYLE DESIGN: Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

ATP – AT SOLENOID SEAL (Part No.JO-15)

AT SOLENOID SEAL

from

$3.99
AT SOLENOID SEAL

Carquest Premium – Automatic Transmission Torque Converter Clutch Solenoid (Part No.SBA4949)

Automatic Transmission Torque Converter Clutch Solenoid

from

$41.99
An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Precision-wound coated copper windings increase product durability and life cycle.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure product reliability, every time.
See More

Driveworks – Oil Seal (Part No.S-710096)

Oil Seal

from

$10.49
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack (Part No.092-018)

EZ Drain Engine Oil Drain Plug: M12-1.75 Thread, 21 mm Head, 1 Pack

from

$17.49
Ditch the wrenches and rags and get this Dorman Twist Drain oil drain plug. It’s specially designed to simplify changing your oil by replacing your factory plug with a tool-free, clean and easy solution. Just push, twist and drain. It also features a custom tapered O-ring that ensures a leak-proof seal, and is finished with electrophoresis and anodization for rust resistance.

Product Features:
  • Simplifies service – this trademark Dorman Twist Drain plug replaces the original equipment oil drain plug and allows for cleaner and easier oil changes
  • Tool-free solution – eliminates need for wrench to drain oil pan; simply push, twist and drain
  • Leak resistant – proprietary inner seal handles high pressure and temperature to prevent leaks
  • Corrosion resistant – specially coated to avoid rust for a long service life
See More

Mr. Gasket – Chrome Automatic Transmission Dipstick & Tube – 27" Length (Part No.9764)

Chrome Automatic Transmission Dipstick & Tube - 27" Length

from

$33.99
Includes dipstick with chromed steel handle and chromed steel dipstick tube with mounting tab. 27 inch long.

Product Features:
  • Fits GM Th350 – Chevy Specific. Modify For Others
  • 27 In Length
  • Chrome Plated Steel
See More

National – Multi-Purpose Seal (Part No.714679)

Multi-Purpose Seal

from

$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; single-lip
  • Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
  • Resistance to EP lubricants
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

National – Multi-Purpose Bearing (Part No.207-L)

Multi-Purpose Bearing

from

$33.99
Product Features:
  • BUILT TO LAST: Advanced heat treatment process for strength
  • PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
  • RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

FAG US – Shaft Seal (Part No.SS2114)

Shaft Seal

from

$7.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

GM Genuine Parts – 2-Way Female Natural Colored Multi-Purpose Pigtail (Part No.PT142)

2-Way Female Natural Colored Multi-Purpose Pigtail

from

$31.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ATP – AT PRESS SW MANIFOLD (Part No.JE-13)

AT PRESS SW MANIFOLD

from

$172.99
AT PRESS SW MANIFOLD

ATP – Automatic Transmission Shifter Cable (Part No.Y-767)

Automatic Transmission Shifter Cable

from

$85.99
Transhift cables connect the transmission selector lever/shifter to the transmission linkage. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Transhift cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Includes brackets, grommets, etc to match original
  • Installs just like the original part
See More

National – Multi-Purpose Bearing (Part No.A-6)

Multi-Purpose Bearing

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
  • PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
  • OE-STYLE DESIGN — Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

B & M – Shift Improver Kit For 65-87 TH400 Transmission (Part No.20260)

Shift Improver Kit For 65-87 TH400 Transmission

from

$72.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:
  • Provides Crisp Shifts
  • On Any Stock Automatic Transmission
  • Eliminates Soft/Sluggish Shift
  • Eliminates Shift Overlap
  • Eliminate Clutch and Band Wear
  • Improves Transmission Life
  • Transmission Removal Not Required
See More

ATP – AT DPSTK TUBE SEAL (Part No.SO-35)

AT DPSTK TUBE SEAL

from

$5.99
AT DPSTK TUBE SEAL

National – Bearing Race (Part No.M802011)

Bearing Race

from

$14.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION – Crowned raceways for even load distribution
  • OE-STYLE DESIGN – Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Cadillac DeVille Clutch Systems

ATP – AT FLEX PLATE (Part No.Z-249)

AT FLEX PLATE

from

$97.99
AT FLEX PLATE

ATP – Automatic Transmission Flex Plate (Part No.Z-188)

Automatic Transmission Flex Plate

from

$65.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

ATP – Automatic Transmission Flex Plate (Part No.Z-124)

Automatic Transmission Flex Plate

from

$102.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

Richmond Gear – Differential Cross Shaft (Part No.80-0272-1)

Differential Cross Shaft

from

$66.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

National – Multi-Purpose Bearing (Part No.203-FF)

Multi-Purpose Bearing

from

$10.99
Product Features:
  • BUILT TO LAST: Advanced heat treatment process for strength
  • PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
  • RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

ARP Auto Racing – 1"L Under Head, 7/16 Inch -20 Thread, 200000Psi Tensile, 12Point Head, Pack Of 6 (Part No.200-2807)

1"L Under Head, 7/16 Inch -20 Thread, 200000Psi Tensile, 12Point Head, Pack Of 6

from

$25.99
Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating.

Product Features:
  • Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
  • Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter For Increased Strength And Improved Flywheel Register
  • High Performance Series Is Rated
  • Increased Strength
  • Chevy 90░ V6 & 305-502 With 1-pc Rear Seal
  • 1″ Underhead Length
See More

Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)

Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In

from

$12.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.200-2802)

ARP Flywheel Bolt Kit

from

$31.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.

Product Features:
  • 3/4″ 12-Point Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • 7/16″-20 RH Thread Size
  • Set of 6
  • Chevy 90° V6 & 265-454 With 2-pc Rear Seal, Ford 289-460
  • 1″ Underhead Length
See More

Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (Sold by each) (Part No.678-154)

Flywheel Bolts - Thread Size 7/16-20; Thread Length 0.900 In. (Sold by each)

from

$4.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
  • Thread Size: 7/16-20
  • Tread Length: 0.900 in.
  • SAE
  • PLEASE NOTE: Item priced and sold by each. See store for details.
See More

Mr. Gasket – Flywheel Dust Cover (Part No.5135)

Flywheel Dust Cover

from

$69.99
Keeps dust, rocks, and debris out of the flex plate and torque converter. *Needs modification for Olds/Pontiac Starters on the driver’s side.

Product Features:
  • Heavy Gauge Chrome Plated Steel
  • Direct Replacement Bolt On
See More

ATP – FLYWHEEL SHIM (Part No.GS-10)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

ATP – ATP Flywheel Shim (Part No.GS-8)

ATP Flywheel Shim

from

$27.99
ATP Flywheel Shim

ATP – AT CLUTCH PLATE (Part No.JC-50)

AT CLUTCH PLATE

from

$8.99
AT CLUTCH PLATE

ATP – AT CLUTCH PLATE (Part No.SC-29)

AT CLUTCH PLATE

from

$13.99
AT CLUTCH PLATE

ARP Auto Racing – For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head (Part No.230-2202)

For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head

from

$44.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:
  • High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
  • Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
  • Large Diameter, Low Profile Design
  • Complete With Washers
  • 200,000 PSI
  • 1″ Underhead Length
  • 3/8″-16 Thread Size
See More

ARP Auto Racing – 3/8" – 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type (Part No.130-2201)

3/8" - 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type

from

$26.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.

Product Features:
  • High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
  • Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
  • Large Diameter, Low Profile Design
  • Complete With Washers
  • Sold As A Kit
  • 180,000 PSI
See More

Cadillac DeVille Automotive Accessories

Rightline Gear – Range 3 Car Top Carrier (Part No.100R30)

Range 3 Car Top Carrier

from

$109.99
The Range 3 Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:
  • Capacity: 18 cu ft
  • Dimensions: 48″ L x 36″ W x 18″ H
  • Designed for SUVs and minivans, WITH or WITHOUT a roof rack
  • Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
See More

iKeyless – Buick/Cadillac/Chevrolet/GMC Non-Transponder Key (Part No.GMKEY202)

Buick/Cadillac/Chevrolet/GMC Non-Transponder Key

from

$23.99
Keys come in many shapes and sizes. Non-transponder keys, such as these, require no special programming. They will need to be cut by a locksmith or automotive professional.

Product Features:
  • Replacement Non-Transponder Key for Buick/Cadillac/Chevrolet/GMC Vehicles
  • Requires no special programming
  • Comes with uncut key blade
See More

iKeyless – Buick/Cadillac/Chevrolet Transponder Key (Part No.GMKEY600)

Buick/Cadillac/Chevrolet Transponder Key

from

$35.99
Needing a new key? We’ve got you covered! This key contains an embedded micro-chip called a transponder. Each transponder has its own unique code–it’s the key’s ‘fingerprint’. When the key is inserted into the ignition and turned, the transponder is energized and broadcasts its unique code to the car’s receiver in the dashboard. If the car’s receiver recognizes the code, it will allow the car to start. The key blade will need to be cut by a locksmith or automotive professional.

Product Features:
  • Replacement Transponder Key for Buick/Cadillac/Chevrolet Vehicles with Megamos 13 Transponder Chip
  • Contains a transponder chip for enhanced security
  • Key blade ready for cutting and pairing
See More

Kat’s – Lower Radiator Hose Heater (Part No.16700)

Lower Radiator Hose Heater

from

$56.99
Product Features:
  • All lower radiator hose heaters are thermostatically controlled and include 2 hose clamps for easy installation
  • 600 watt lower radiator hose heater for a 1-3’4″ lower hose
See More

Kat’s – Lower Radiator Hose Heater (Part No.16600)

Lower Radiator Hose Heater

from

$56.99
Lower Radiator Hose Heater

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 38.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77004)

Windflector - Classic, Window, Fits Up To 38.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc

from

$59.99
Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:
  • The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
  • Prevents The Rain From Entering The Sunroof Opening While Driving
  • Helps Reduce Heat Buildup Inside The Vehicle
  • Available In 5 Different Sizes For Perfect Fit
  • No Drill Installation
  • Installs Quickly And Easily With 3M Automotive-Grade Adhesive
See More

Auto Ventshade (AVS) – Windflector – Classic, Window, Fits Up To 41.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc (Part No.77005)

Windflector - Classic, Window, Fits Up To 41.5" Wide Sunroofs, Smoke, Outside Mount, 1 Pc

from

$59.99
Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:
  • The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
  • Prevents The Rain From Entering The Sunroof Opening While Driving
  • Helps Reduce Heat Buildup Inside The Vehicle
  • Available In 5 Different Sizes For Perfect Fit
  • No Drill Installation
  • Installs Quickly And Easily With 3M Automotive-Grade Adhesive
See More

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Grey (Part No.0604022)

Custom Fit 4 Piece Floor Mat Set, Grey

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

PantsSaver – Custom Fit 4 Piece Floor Mat Set, Black (Part No.0604001)

Custom Fit 4 Piece Floor Mat Set, Black

from

$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:
  • Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
  • All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
  • Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
  • Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
  • No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
  • Custom Fit Car Mats
  • Anti Skid
  • Raised Borders
  • All Weather Protection
  • Odorless
See More

Auto Ventshade (AVS) – Ventvisor Window Visors, Outside Mount, Smoke, Front And Rear, 4 Pc (Part No.94746)

Ventvisor Window Visors, Outside Mount, Smoke, Front And Rear, 4 Pc

from

$69.99
AVS Original Ventvisor is an external mount side window deflector with an unique design that allows fresh air to circulate through open windows while keeping the weather out reducing interior heat and window fogging. Original Ventvisors come with a .

Product Features:
  • Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Design
  • Easy Installation With No-Drilling Or Special Hardware Required
  • Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
  • Made From Durable, Impact-Resistant Acrylic
  • Available In Dark Smoke And Chrome Finishes
See More

Rightline Gear – Sport Jr. Car Top Carrier (Part No.100S50)

Sport Jr. Car Top Carrier

from

$109.99
The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:
  • Capacity: 10 cu ft
  • Dimensions: 36″ L x 30″ W x 16″ H
  • Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
  • 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
  • Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
  • Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
See More

Rightline Gear – Sport 3 Car Top Carrier (Part No.100S30)

Sport 3 Car Top Carrier

from

$139.99
The Rightline Gear Sport 3 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 3 is one of the largest car top bags on the market.

Product Features:
  • Capacity: 18 cu ft
  • Dimensions: 48″ L x 36″ W x 18″ H
  • Designed for SUVs and minivans, WITH or WITHOUT a roof rack
  • Designed for SUVs and minivans, WITH or WITHOUT a roof rack
  • Enclosed front end helps fit your gear to the size of the carrier and prevents overfilling.
  • Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
See More

Dorman – Help – Lighter Socket and Removal Tool (Part No.56457)

Lighter Socket and Removal Tool

from

$27.99
This direct replacement cigarette light is designed to match the fit and function of the original lighter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this direct replacement cigarette lighter is designed to match the fit and function of the original lighter on specified vehicles
  • Ideal solution – this cigarette lighter is a reliable replacement for an original lighter that is missing or burned out
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Fiamm – Freeway Blaster Low Note Horn: Universal Fit, Hardware Included (Part No.7211223)

Freeway Blaster Low Note Horn: Universal Fit, Hardware Included

from

$19.99
Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:
  • FIAMM AM80SX LOW note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
  • Universal Fit
  • FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
  • Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
  • FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle. Proven to offer outstanding resistance to wear and tear
  • 133dB @ 4″, 12V
See More

Fiamm – Freeway Blaster High Note Horn: High Tone, 133 dB (Part No.7210223)

Freeway Blaster High Note Horn: High Tone, 133 dB

from

$25.99
Extremely powerful AM-80SX horn. Is an excellent replacement for stock AM-80SX or HK-9 disc style horns. Each horn is tested to assure maximum performance.

Product Features:
  • FIAMM AM80SX HIGH note two terminal Freeway Blaster features aluminum coil motor, corrosion resistant steel housing and an ABS plastic projector.
  • FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
  • Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications
  • FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle
  • 133dB at 4″, 12V
See More

Budge – Budge Premium Car Cover, 3 Layer Moderate Weather Protection for Cars, Fits Cars up to 16′ 8" (Part No.3LF3)

Budge Premium Car Cover, 3 Layer Moderate Weather Protection for Cars, Fits Cars up to 16' 8"

from

$99.99
The Premium Car Cover is our one of kind 3-layer cover. Made from 3 durable layers, this cover provides unparalleled waterproof protection for your vehicle. The Budge Premium car cover combines multiple layers of exceptionally waterproof polypropylene with an interior waterproof membrane while the inner most layer of the cover is comprised of a nonabrasive fleece-like material. This cover is also UV treated to protect against harsh sun exposure.

Product Features:
  • This car cover fits cars 200″ L x 60″ W x 51″ H
  • Material has a soft inner lining that will not scratch the surface of your vehicle
  • Built-in strap and buckle system keeps cover secure
  • This car cover is made from 3 durable layers that will keep your vehicle protected
  • Full elastic hem creates a comfortable fit
See More

Budge – Ultra Car Cover, Gray, Size 5: Fits up to 22′ L, 3 Layers, Water Resistant, Scratchproof, Dustproof (Part No.D-5)

Ultra Car Cover, Gray, Size 5: Fits up to 22' L, 3 Layers, Water Resistant, Scratchproof, Dustproof

from

$72.99
The Ultra car cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our duor car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:
  • This car cover fits cars 264″ L x 70″ W x 53″ H
  • This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
  • This car cover is water resistant and features ultrasonically welded seams for extra durability
  • Cover is suitable for short term outdoor protection and long-term indoor protection
  • This car cover fits vehicles like: Chevrolet Impala, Ford Thunderbird, Cadillac Eldorado, Dodge Charger, Oldsmobile Cutlass Supreme
See More

iKeyless – GM – 4 Button Camo Themed Remote Replacement Shell (Part No.GMMT400CA)

GM - 4 Button Camo Themed Remote Replacement Shell

from

$17.99
Sometimes the outer case for your keyless entry remote can be damaged or cracked. Even normal wear and tear can often lead to an unpleasant cosmetic appearance. This replacement shell will have your remote looking sleek and stylish in no time.

Product Features:
  • GM Camo Themed Replacement Remote Case
  • Replaces OEM factory-original remote case
  • Camouflage theme
See More

iKeyless – GM – 4 Button Black Remote Replacement Shell (Part No.GMMT400)

GM - 4 Button Black Remote Replacement Shell

from

$17.99
Sometimes the outer case for your keyless entry remote can be damaged or cracked. Even normal wear and tear can often lead to an unpleasant cosmetic appearance. This replacement shell will have your remote looking sleek and stylish in no time.

Product Features:
  • Replacement Case for Select GM Remotes
  • Replaces OEM factory-original remote case
See More

Auto Ventshade (AVS) – Ventvisor Window Visors, In-Channel Mount, Smoke, Front And Rear, 4 Pc (Part No.194053)

Ventvisor Window Visors, In-Channel Mount, Smoke, Front And Rear, 4 Pc

from

$69.99
AVS In-channel Ventvisors offer a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle.

Product Features:
  • Precision Engineered For A Custom Fit On Your Vehicle With Modern, Curved Low-Profile Design
  • Installs In The Window Channel For A Sleek, Aerodynamic Appearance
  • Made From Durable, Impact-Resistant Acrylic
  • Available In Dark Smoke Finish
See More

Auto Ventshade (AVS) – Ventshade Window Visors, Outside Mount, Stainless Steel Finish, Front/Rear, 4 Pc (Part No.14112)

Ventshade Window Visors, Outside Mount, Stainless Steel Finish, Front/Rear, 4 Pc

from

$69.99
AVS Ventshade is the original AVS product. Offered for many classic vehicles it is the standard that created the side window deflector industry. Its ledge profile that is mounted in the window channel combined with its stainless steel construction makes Ventshades the standard by which all others are measured.

Product Features:
  • Ledge Profile That Is Mounted In The Window Channel For A Secure Mount
  • Keeps Rain Out And Lets Fresh Air In
  • Manufactured From High-Quality Steel
  • Available In Polished Stainless And Black Finishes
  • Quick And Easy Installation
See More

Dorman – Help – Keyless Entry Remote 4 Button (OE Fix) (Part No.13745)

Keyless Entry Remote 4 Button (OE Fix)

from

$133.99
Need a new keyless remote? This fob is designed to look and function exactly like your original, and you don’t need to pay for expensive programming at the car dealership. This Dorman OE FIX replacement includes a patented, DIY-friendly programming tool for simple replacement. Just plug it into the OBD II port in your dashboard, follow the included instructions, and you’re good to go. Setup takes minutes, and you can rely on your new remote for years.

Product Features:
  • Vehicle-specific replacement or spare – this keyless entry transmitter looks and functions like the original fob on certain vehicle years, makes, models and configurations
  • Do-it-yourself solution – includes a patented programmer that plugs into your OBD II port to setup your new fob in minutes, without expensive dealership programming
  • Matches features – this 4-button remote control features lock, unlock, panic, and trunk release functions
  • Important notes – you must have at least one of your original keys or fobs for programming process; only for use on vehicles that came originally equipped with keyless entry
See More

iKeyless – GM Keyless Entry Remote – 4 Button with Trunk (Part No.GM660)

GM Keyless Entry Remote - 4 Button with Trunk

from

$72.99
Looking for a spare key fob? We’ve got you covered! This transmitter device operates your vehicle’s keyless entry system with four button functions: LOCK, UNLOCK, TRUNK, and PANIC. The clicker’s durable case is meant to withstand everyday use while keeping internal electronics protected. This remote enhances both vehicle security and entry with a small click of a button. Easy! It has a freshly installed battery and is able to emit signals from a range of distances. This fob makes a great gift for both new and experienced drivers.

Product Features:
  • Replacement Remote with FCC ID: KOBUT1BT
  • 4 button functions: LOCK, UNLOCK, TRUNK, and PANIC
  • Freshly installed battery included
See More

Cadillac DeVille Interior Products

ATP – Speedometer Cable (Part No.Y-815)

Speedometer Cable

from

$14.29
Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Includes Cable Lube
  • Plastic sheath protects cable from debris and water
  • Comes ready to install
See More

GM Genuine Parts – Black Multi-Purpose Relay (Part No.D1780C)

Black Multi-Purpose Relay

from

$22.99
ACDelco GM Original Equipment Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Help – Multifunction Switch Assembly (Part No.49277)

Multifunction Switch Assembly

from

$29.99
This console multi-function switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this console multi-function switch is made to match the fit and performance of the original switch on specific vehicle applications
  • Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2999)

Multi-Use Connector

from

$49.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
See More

GM Genuine Parts – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT146)

2-Way Female Black Multi-Purpose Pigtail

from

$26.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2211)

Multi-Use Connector

from

$29.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest – Hazard Warning Flasher Connector (Part No.PT121)

Hazard Warning Flasher Connector

from

$10.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our blower motor resistors are a direct-fit replacement electrically operated resistor that replaces damaged OE units restoring a/c and heater blower motor variable speed control
  • Each of our blower motor resistors is made from high quality ceramics with copper electrical connectors to ensure accurate and precise resistance values for long life and high performance.
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • All of our switches are made to OE spec to ensure proper fit, form and function
  • All parts are manufactured to stringent quality requirements.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2947)

Multi-Use Connector

from

$27.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Carquest Premium – Multi-Use Connector (Part No.PTC2858)

Multi-Use Connector

from

$88.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2462)

Multi-Use Connector

from

$45.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Help – Turn Signal Return Springs, Pack of 2 (Part No.49312)

Turn Signal Return Springs, Pack of 2

from

$4.29
This turn signal cam retainer spring is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this turn signal cam retainer spring matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
  • Package Contents: 2 Switch Springs
See More

Dashmat – VelourMat Dashboard Cover, Black (Part No.71112-01-25)

VelourMat Dashboard Cover, Black

from

$106.99
VelourMat dashboard covers are constructed of soft, elegant velour material. Each VelourMat is custom made for a precise fit. Dramatically reduces windshield haze caused by gasses emitted from the dashboard. Also reduces hazardous windshield glare. Protect your dashboard from sun damage, such as cracks and warps.

Product Features:
  • Made of soft elegant rich velour
  • Custom made to fit each dashboard
  • Hook & loop fasteners included for easy & secure installation
  • Cuts hazardous windshield glare
  • Protects dashboard from sun damage stopping cracks and warping
  • Passenger-side airbag opening included where applicable
See More

Grant – Use With All Grant Classic/Challenger/Signature Series Steering Wheels, Black (Part No.3196)

Use With All Grant Classic/Challenger/Signature Series Steering Wheels, Black

from

$54.99
Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:
  • Use To Install All Classic, Challenger Or Signature Series Wheels
  • Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
  • ISO/ TS Certified
  • Designed To Mount Our Wheel To Your Rig
  • Use with all Grant Classic/Challenger/Signature Steering Wheels
See More

ATP – SPEEDO GEAR (Part No.YA-1)

SPEEDO GEAR

from

$30.99
SPEEDO GEAR

Carquest Premium – Multi-Use Connector (Part No.PTA3133)

Multi-Use Connector

from

$55.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
See More

Carquest Premium – Multi-Use Connector (Part No.PTA2487)

Multi-Use Connector

from

$27.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Purpose Relay (Part No.RAC1004)

Multi-Purpose Relay

from

$29.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Dorman – Help – Seat Belt Stop Kit (Part No.74359)

Seat Belt Stop Kit

from

$13.49
This seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this seat belt buckle button stop is designed to match the appearance, fit and function of the original stop on specified vehicles
  • Restores functionality – this buckle stop is made to fully restore appearance and functionality after the original part fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Turn Signal Canceling Cam (Part No.83233)

Turn Signal Canceling Cam

from

$12.49
This turn signal cam is designed to match the fit and function of the original cam on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this turn signal cam is designed to match the fit and function of the original cam on specified vehicles
  • Restores functionality – reliable replacement for an original part that has failed due to wear or collision damage
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Fiamm – AM-80SX High Tone Replacement Horn: Universal Fit for all 12 Volt Applications (Part No.7200223)

AM-80SX High Tone Replacement Horn: Universal Fit for all 12 Volt Applications

from

$19.99
The AM-80SX is designed to provide lightweight compact size, yet powerful sound. It exceeds S.A.E. and O.E.M specifications for a wide range of vehicle application.

Product Features:
  • Features corrosion resistant steel housing and universal mounting bracket.
  • Available in high and low tone
  • FIAMM horn package Includes: Universal mounting bracket, jumper wire, nut and female connectors
  • Each FIAMM horn is tested to assure maximum performance and exceeds SAE and OEM specifications.
  • FIAMM horn can be installed on any vehicle, UTV, ATV, or Motorcycle with 12 volt application
  • 125dB @ 4″, 12V
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1258)

Multi-Use Connector

from

$29.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1046)

Multi-Use Connector

from

$52.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ATP – Accelerator Cable (Part No.Y-263)

Accelerator Cable

from

$29.99
Accelerator cables connect the foot pedal to either the carburetor or EFI assembly. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP accelerator cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Includes brackets, grommets, etc to match original
  • Fit and function like the original parts
  • Restores normal operation
See More

Carquest Premium – Multi-Purpose Relay (Part No.FCA1004)

Multi-Purpose Relay

from

$18.99
Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Carquest – Dimmer Switch (Part No.52C1001)

Dimmer Switch

from

$16.99
Carquest Vehicle Solutions provides high-quality solutions for a wide range of applications. The Dimmer Switch enhances driver comfort and visibility by allowing easy customization of dashboard and interior light levels. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:
  • Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
  • Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
  • Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
  • Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
See More

Search Over 5,473 Cadillac DeVille Parts Online for Delivery or Pick Up

Looking for the best Cadillac DeVille aftermarket replacement parts? Replacing worn and broken parts on your Cadillac DeVille? Check out our online catalog to find the best selection of aftermarket Cadillac DeVille parts as well as real user reviews on Cadillac DeVille replacement parts. Make an informed decision about every component you add to your DeVille.

At Advance Auto, we’ve got you covered when it comes to getting your Cadillac DeVille in tip top condition. We’ve got over 5,473 Cadillac DeVille parts to choose from in popular categories like Body Parts, Transmission Parts and Clutch Systems. If you’re looking for the best prices, try searching our Cadillac DeVille parts catalog to compare OEM and aftermarket parts for your Cadillac DeVille.

Whether you need Cadillac DeVille body parts, interior components, or custom Cadillac DeVille parts you can find them online at Advance Auto. Want to order your Automotive Accessories online? Or maybe you need your Cadillac Interior Products same day? No problem, you can pick up DeVille parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Cadillac DeVille parts has never been easier.