Buick Encore Parts

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new CAPA certified standard replacement front lower bumper cover grille, matte-black. It is designed to replace your existing front lower bumper cover grille. Check to be sure it fits your vehicle.

Product Features:

• Matte-Black, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Rear Passenger Side Bumper Cover, Without Side Sensor Bracket, Paint To Match

Product Features:

• Without Side Sensor Bracket, Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

New CAPA Certified Standard Replacement Passenger Side Fender

Product Features:

• Made Of Galvanized Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

• Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
• Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
• Excellent value – original equipment quality at a lower price
• Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

• Constructed of high-quality materials for long-lasting durability
• Many different styles are available, including threaded and wide panel
• Packaged in a variety of piece counts for use with both small and large projects
• Also suitable for a broad range of industrial and commercial uses

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New Standard Replacement Front Lower Bumper Deflector, Plastic, All 2013-2015 Models, Fits All-Wheel Drive 2016 Models Only

Product Features:

• Plastic, All 2013-2015 Models, Fits All-Wheel Drive 2016 Models Only, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

• Needa Parts offers a complete assortment for all popular makes and models
• Vehicle make specific fastener kits are available
• All fasteners meet or exceed OEM standards

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

As the leading value-added global distributor of high quality replacement components, equipment, and parts to repair and accessorize their automobiles, trucks, and other vehicles while offering our customers the most comprehensive and cost effective part solutions, KAI is supplying a new CAPA certified standard replacement grille, black with chrome molding, all 2013-2015 and 2016 all-wheel drive models. It is designed to replace your existing front grille. Check to be sure it fits your vehicle.

Product Features:

• Black With Chrome Molding, All 2013-2015 And 2016 All-Wheel Drive Models, Made Of ABS Thermoplastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Warranty: Limited
• Check Out The Large Selection Of Parts Available For Your Vehicle

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

• Constructed of high-quality materials for long-lasting durability
• Many different styles are available, including threaded and wide panel
• Packaged in a variety of piece counts for use with both small and large projects
• Also suitable for a broad range of industrial and commercial uses

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Product Features:

• Available in blind, push-in and screw-in styles
• Constructed of high-quality materials for long-lasting durability
• Also suitable for a broad variety of industrial and commercial uses
• Packaged in a variety of piece counts for use with both small and large projects

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

• Exact fit original equipment design guarantees correct fit and function
• Engineered and built to meet or exceed original equipment quality standards
• Individually tested for performance and reliability
• Hardened, nitride plated steel shaft provides optimal durability
• Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
• Heavy gauge steel body is electrostatically painted and heat cured to OE specs
• Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
• Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
• No special installation tools required
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

• Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
• Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
• Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
• Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

• Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
• Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
• Safety compliant – part has undergone simulated crash testing under government guidelines
• Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

The Door Window Switch is an application specific part typically mounted to the inside door panel used to remotely open and close the door windows by way of the switch.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

Coat to Coast International body side molding is a stylish accessory that compliments any vehicle. Durable ABS plastic is chrome plated for lasting shine. Side moldings install effortlessly with automotive grade 3M tape. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

• Constructed From High-Quality, Durable, Automotive Grade ABS
• Two Layers Of Clear Coat Enhance And UV Protect The Finish
• Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
• Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
• Easy Installation
• Mount with 3M Tape

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission cooler reinstallation kit
• Contains part numbers 248001, 226201, 240250 and 4 hose clamps
• Provides all hardware for reinstallation of Imperial transmission coolers
• Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
• Made of high grade nylon for easy installation
• Removable buttons for cooler/fan relocation
• Made for both transmission coolers and electric fan installation
• Comes with Quick Connect coupler

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 13-22; CHEV 12-22;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2012-2022
• Weight approx: 2 Lbs

This transmission control module has been fully tested and validated to match the function and performance of the original TCM on specified vehicle applications.

Product Features:

• Direct replacement – this transmission control module matches the function and performance of the stock TCM on specified years, makes and models
• Ideal solution – this transmission control module is a reliable replacement for an original part that has failed due to corrosion or electrical failure
• Thoroughly tested – this TCM has undergone full vehicle simulator testing to confirm full functionality for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

• Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
• Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
• Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
• Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
• Superior thermal and chemical resistance
• Good abrasion and dry running capability
• Delivers quality and reliable performance for every type of repair

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

Trans shift cables connect the transmission selector lever/shifter to the transmission linkage. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. Pioneer Trans shift cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Manufactured to OE specifications to restore proper operation.
• High tensile strength steel inner cable provides durability.
• Protective polymer housing protects cable from debris and abbrassion, allowing for smooth operation.
• Includes needed cable ends, brackets and grommet (where applicable) for proper repair.

This automatic transmission shift repair kit is designed to match the original components required to repair the transmission shifter on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Product Features:
• Direct replacement – this automatic transmission shift repair kit is designed to match the original components required to repair the transmission shifter on specified vehicles
• Ideal solution – this repair kit is a reliable replacement for original components that are damaged or have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 13-15; CHEV 13-16;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2013-2016
• Weight approx: 5 Lbs

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 16-22; CHEV 16-17;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2016-2022
• Weight approx: 5 Lbs

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 16-21; CHEV 17-22;. Please verify your application.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 2016-2022
• Weight approx: 5 Lbs

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• O-rings or seals are included (where applicable)
• Weather-tight connectors prevent leaks and corrosion for longer life
• Includes all necessary brackets and grommets for easier installation
• Extensive design validation testing and 100% end-of-line tested
• Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included (where applicable)
• Magnet size and strength optimized for precise signal output.
• Weather-tight connectors prevent leaks and corrosion for longer life
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
• Excellent high temperature capabilities
• Compatible with wide range of fluids
• Delivers quality and reliable performance for every type of repair

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
• Resistance to EP lubricants
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

• All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
• 100% of friction components are replaced with upgraded heavy duty parts.
• Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
• 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
• Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
• Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
• 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

• Product might not be available in all states due to local laws.
• We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
• Each Moveras transmission is produced in a World Class manufacturing facility
• Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
• Our transmissions are produced in a Clean Room environment
• Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Keep your engine oil or transmission fluid at an optimum temperature to avoid cold starts in the winter. Just place this heating pad beneath your oil or transmission pan and plug it into a 120V outlet to warm the fluid.

Product Features:

• Acid resistant
• Easy to install
• Pliable
• Silicone covered
• Use as oil pan or transmission pan heater

AVS Low Profile Ventvisor has the smallest profile of side window deflectors available. By utilizing either In-channel or Outside Mount design (varies by application) AVS Low profile side window deflectors maintain the sleekest look for your vehicle while still allowing fresh air to circulate and not letting the weather outside your comfort. Comes with a Limited Lifetime Warranty.

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Stealthy Design For The Lowest Profile
• Choose Internal (In-Channel) Or External (Above Door Glass) Mount Options
• Easy Installation With No-Drilling Or Special Hardware Required
• Attaches Easily With 3M(TM) Automotive-Grade Adhesive Above The Window
• Impact-Resistant Acrylic Or Warp-Resistant ABS Construction
• Available In Dark Smoke (Acrylic) And Matte Black (ABS) Finishes

Simple Key is a new way to easily replace modern car keys. The “do-it-yourself” kit includes basic instructions to pair the key to your vehicle in just a few minutes-no tools required. Once the key is cut, plug in the included EZ installer and press a button. That’s it. You’re finished! Set-up instructions are included with purchase. This specific product performs two functions: it works as a key and keyless entry remote. It has four button functions: Lock, Unlock, Trunk, and Panic. The key portion starts the vehicle ignition while the remote operates the keyless entry functions (lock,unlock, etc.). Enhancing vehicle security is just a simple click away.

Product Features:

• Includes DIY Programming Instructions
• 4 button functions: LOCK, UNLOCK, TRUNK, and PANIC
• Freshly installed battery included

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation
• Limited Lifetime Warranty

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicle interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation

The AVS Aeroskin Chrome Hood Protector provides a tough defense against road debris for your vehicle’s hood. Aeroskin’s flush mount design fits the hood contours perfectly providing the best leading edge hood protection today. Aeroskins come with a .

Product Features:

• Custom-Molded With Precision Engineering To Ensure A Perfect Fit
• Provides Sleek, Aerodynamic Hood Protection With Low-Profile, Flush-Mount Design
• Cool, Contoured And Classy Styling Accent
• Easy, No-Drill Installation — Installs Using 3M Automotive-Grade Adhesive
• Car Wash Safe
• Available In Dark Smoke, Chrome, Matte Black, OEM Paint Code Color-Match Finishes

The AVS Aeroskin Chrome Hood Protector provides a tough defense against road debris for your vehicle’s hood. Aeroskin’s flush mount design fits the hood contours perfectly providing the best leading edge hood protection today. Aeroskins come with a .

Product Features:

• Custom-Molded With Precision Engineering To Ensure A Perfect Fit
• Provides Sleek, Aerodynamic Hood Protection With Low-Profile, Flush-Mount Design
• Cool, Contoured And Classy Styling Accent
• Easy, No-Drill Installation — Installs Using 3M Automotive-Grade Adhesive
• Car Wash Safe
• Available In Dark Smoke, Chrome, Matte Black, OEM Paint Code Color-Match Finishes

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

• Capacity: 15 cu ft
• Dimensions: 42″ L x 34″ W x 18″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

The Rightline Gear Sport Jr Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport Jr is the only car top bag made specifically for compact cars.

Product Features:

• Capacity: 10 cu ft
• Dimensions: 36″ L x 30″ W x 16″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

AVS In-channel Ventvisors offer a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle.

Product Features:

• Precision Engineered For A Custom Fit On Your Vehicle With Modern; Curved Low-Profile Design
• Installs In The Window Channel For A Sleek; Aerodynamic Appearance
• Made From Durable; Impact-Resistant Acrylic
• Available In Dark Smoke Finish

New CAPA Certified Standard Replacement Rear Skid Plate, Paint To Match

Product Features:

• Paint To Match, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Front Skid Plate, Silver

Product Features:

• Silver, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Undercar Shield

Product Features:

• Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
• All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
• All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
• Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
• Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
• No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
• All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
• All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
• Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
• Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
• No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
• All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
• All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
• Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
• Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
• No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

The Protector V SUV cover features 5 durable layers to ensure 100% waterproof protection. This SUV cover is made from three layers of polypropylene that rests on top of a fully waterproof membrane. The inner most layer is made from a nonabrasive fleece material so you won’t have to worry about scratching your vehicle. The Protector V is UV resistant waterproof breathable and durable making it ideal for all-weather protection. Cover comes with a built in strap and buckle system. This SUV cover fits SUVs 186″ L x 59″ W x 60″ H.

Product Features:

• This SUV cover fits SUVs 186″ L x 59″ W x 60″ H.
• This SUV cover is made from 5 durable layers – our thickest cover yet!
• This SUV car cover is 100% waterproof and UV resistant for superior outdoor protection
• This waterproof SUV cover has a soft fleece inner lining that pampers your vehicle’s paint
• Built-in strap and buckle system keeps your SUV cover secure

The Budge Ultra SUV Cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our Ultra SUV covers are fully breathable, with ultra-sonically welded seams for added durability. This soft, nonabrasive material will not harm the surface of your vehicle. Designed for indoor and outdoor use, the Ultra SUV Cover is designed to be breathable while it protects your vehicle. This improves airflow to reduce condensation and helps prevent mold and mildew. The Ultra cover features a full elastic hem and built-in grommets. This cover is gray in color and includes a storage bag and antenna patch. Designed to fit, this SUV cover fits SUVs 186″ L x 59″ W x 60″ H.

Product Features:

• This SUV cover fits SUVs 186″ L x 59″ W x 60″ H.
• This SUV cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
• This SUV cover is water resistant and features ultrasonically welded seams for extra durability
• Cover is suitable for short term outdoor protection and long-term indoor protection
• Elasticized hem and sewn-in grommets for a secure fit

The Budge Rain Barrier SUV cover offers easy to use, 100% waterproof indoor and outdoor protection. This SUV car cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof SUV covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a gray color. Includes a storage bag and antenna patch. Our SUV covers are available in a variety of sizes that will fit popular makes like Jeep, Toyota, Ford, Chevrolet, GMC and much more.

Product Features:

• This SUV cover fits SUVs 186″ L x 59″ W x 60″ H
• This waterproof SUV cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
• This SUV car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
• This vehicle cover features ultrasonically welded seams for extra durability and a full elastic hem to help keep your cover secure to your SUV
• Full elastic hem to keep the cover securely on the vehicle

New Standard Replacement Front License Plate Bracket

Product Features:

• Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Accelerator Pedal Position (APP) sensor provides a signal identifying the location of the accelerator pedal to the engine control module. As the vehicle operator requests various degrees of torque from the engine the signal from the sensor provides the engine computer the necessary information to implement the request. The sensor provides two positive slope signals that have an offset voltage range and increase at different rates, the two signals from the sensor provide the engine computer with two unique signal inputs ensuring safety should one signal fail.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Combination Switch provides centralized control of multiple vehicle functions such as headlights, turn signals, and wipers, enhancing driver convenience and safety by allowing seamless operation from a single control point. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

The Brake Pedal Position sensor is similar to the Stop Light Switch but is a more critical sensor input to the vehicle stability system. The vehicle stability control module requires the exact location of the brake pedal during a vehicle skid so that a controlled brake pressure may be applied to each individual wheel in an attempt to straighten the vehicle position out and back into control.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

GM Genuine Parts Brake Pedal Position Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors monitor the movement or position of the brake pedal to directly activate the brake, brake lights, and turn off cruise control if applied. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

The airbag clockspring is one piece of the passenger restraint system. The restraint airbag located in the driver’s steering wheel is hardwired, meaning the airbag has a directly wired connection to the vehicle passenger restraint module. The clockspring is located within the steering column just below the airbag assembly and contains a spirally wound flat ribbon conductor within it. As the steering wheel is rotated during normal driving conditions the electrical connection between the air bag and the restrain module remains complete.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

This air bag clockspring matches the fit of an original that is missing or damaged and is designed to restore current to the air bag, horn, and steering wheel-mounted controls on specified vehicles.

Product Features:

• Direct replacement – reverse-engineered to match the original clockspring on specific vehicles
• Ideal solution – engineered to ensure proper restoration of air bag system performance
• Durable construction – designed, manufactured and tested to strict specifications for reliable service
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The airbag clockspring is one piece of the passenger restraint system. The restraint airbag located in the driver’s steering wheel is hardwired, meaning the airbag has a directly wired connection to the vehicle passenger restraint module. The clockspring is located within the steering column just below the airbag assembly and contains a spirally wound flat ribbon conductor within it. As the steering wheel is rotated during normal driving conditions the electrical connection between the air bag and the restrain module remains complete.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Product Features:

• Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
• Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
• All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi┐custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ridecompanions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that’ll combat any juice box spill, cereal crumbs or pet mess it is also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi¿custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only – It is designed to fit most bench-style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non-Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water repellent finish that ll combat any juice box spill, cereal crumbs or pet mess. It s also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non slip bottom. Semi-custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for rear seats only It is designed to fit most bench style and bucket rear seats. If your vehicle is equipped with a center seatbelt, it will not be accessible.

Product Features:

• Made From A Polycotton Drill Fabric That Features A Durable Water Repellent Finish That ll Combat Any Juice Box Spill, Cereal Crumbs Or Pet Mess
• Engineered With An Extra Layer Of Nylon Lining, Which Helps To Further Protect The Covered Seat
• The Seat Protector Stays In Place With The Help Of Durable Straps, Specialty Inserts And A Non Slip Bottom
• Semi-custom To Fit The Size And Type Of Vehicle
• Machine Washable, Making It An Easy Accessory For Any Family
• Machine Washable
• Designed To Fit Bench Style Rear Seats

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

As part of the Vehicle Stability System multiple sensor inputs are required for the processor to perform the brake control operation to maintain vehicle skid control and vehicle stability control. The Steering Wheel Position Sensor provides the processor the needed steering position and rotational speed input required for proper braking operation.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Seat Switch allows for easy adjustment of seat positions, enhancing driver and passenger comfort and ensuring optimal ergonomics during travel. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
• Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
• Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
• Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.