2023 Ram 2500 Drivetrains

Name: Differential Cover
Brand: aFe POWER
SKU: 46-70392
Price: 488.99 USD

Below you will find various in-demand Ram Drivetrains, components and accessories for your 2023 2500. Advance Auto Parts has popular 2500 parts like Differentials, Universal Joints, Transfer Cases and more. You’ll also find aftermarket and OEM Drivetrains for other 2500 model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2023 Ram 2500 Drivetrains below and start saving instantly.

Popular 2023 Ram 2500 Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

U-Joints

Transfer Case Shift Lever Bushings

Differential Covers

Differential Bearings

Differential Axle Shafts

Axle Shaft Seals

Differential Carriers

Differential Carrier Shim Kits

Differential Ring and Pinions

Differential Crush Sleeves

Essential Drivetrains for 2023 Ram 2500s

from

$488.99

aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. Pro Series differential covers include an oil level sight glass and magnetic deep reach fill plug. This cover is finished with black powder-coating and machined fins for a distinctive look._x000d__x000d_Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration._x000d__x000d_Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling._x000d__x000d_Magnetic Plugs: This system incorporates a magnetic drain and deep reach fill plug to capture loose particles for maximum protection._x000d__x000d_Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling._x000d__x000d_Oil Level Sight Glass: A pre-installed oil level sight glass allows quick and easy oil inspection._x000d__x000d_When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:

Constructed out of durable cast aluminum
Wrinkle-black powder-coating with machined fins
Dual neodymium magnetic plugs are used for maximum gear protection
Large oil level sight glass with calibration plug set to the factory oil level to eliminate overfilling

from

$558.99

Constructed out of durable cast aluminum
Wrinkle-black powder-coating with machined fins
Dual neodymium magnetic plugs are used for maximum gear protection
Large oil level sight glass with calibration plug set to the factory oil level to eliminate overfilling

from

$529.99

DiffrlCarr

from

$469.99

Product Features:

Standard open carrier case
Includes spider gears
Fits 2007 and up Chrysler 9.25″ front

from

$106.99

Product Features:

Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
Bearing cups are heat treated for strength; precision-ground and case-hardened for durability.
Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.

from

$41.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$13.99

Crush Sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS & 9.5″. Approx 0.640″ long.

Product Features:

Crush sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS and 9.5″
0.640″ tall

from

$3.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$49.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

from

$76.99

from

$44.99

9.25″ AAM front solid axle inner axle seal, 2003 & up Dodge Ram 2500/3500.Yukon Mighty seal.

Product Features:

Front inner axle seal
Fits Chrysler 9.25″ front

from

$33.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: springless; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$19.99

Mobil 1 Synthetic Gear Lubricant LS 75W-90 is a supreme, multi-purpose automotive gear lubricant that helps to provide exceptional thermal stability and resistance to high temperature oxidation, extending gear life due to minimal deposits. Helps to deliver outstanding protection against low speed/high torque wear with the capability to handle severe driving conditions while delivering smooth efficient performance. Mobil 1 Synthetic Gear Lubricant LS provides exceptional shear stability, corrosion protection, and enhanced frictional properties. Compared to conventional hypoid gear lubricants, Mobil 1 LS 75W-90 performs exceptionally over a wide range of temperatures to reduce wear at start up. Mobil 1 gear lube helps to minimize leakage and reduce contamination while providing good resistance to foaming to maintain film strength for reliable lubrication. Meets or exceeds the requirements of the following industry specifications: API GL-5.

Product Features:

Mobil 1 LS synthetic automotive gear lubricant exceeds the highest level of performance requirements of modern passenger vehicles
Helps to provide exceptional thermal stability and resistance to high temperature oxidation and extend gear life due to minimal deposits
Delivers outstanding protection against low speed/high torque wear, handling severe driving conditions with smooth, efficient performance
Compared to conventional hypoid gear lubricants, performs exceptionally over a wide range of temperatures to reduce wear at start up
Provides exceptional shear stability, corrosion protection, and enhanced frictional properties
Manufacturer Part Number: 104361

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$914.99

Ring and Pinion Kit

from

$879.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits GM and Chrysler 11.5″
11.50″ ring gear diameter
30 spline pinion
12 ring gear bolts
4.88 ratio

from

$10.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$21.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$33.99

Product Features:

Brand may vary by location

from

$15.99

This transfer case control lever bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this transfer case control lever bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$176.99

Product Features:

GM9.5″ INTERNAL KIT (OPEN) 33 SPL. FRONT & REAR

from

$409.99

2007 & Up 9.25″ Chrysler standard Open 33 spline straight axle front spider set (not rear). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits 2007 and up Chrysler 9.25″ front open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$319.99

38 spline upgraded cut to length axle for 10.5″ & 11.5″ Dodge rear. This cut to length axle will accomodate applications from 36.4″ to 40.1″. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects. The factory spindles will need to be machined in order to accept these axles.

Product Features:

38 spline
Cut to length design fits 36.4″-40.1″ applications
Fits Chrysler 11.5″

from

$535.99

Axle shaft damaged or bearings worn out? This axle shaft assembly directly replaces the original equipment on certain vehicles, ready for install right out of the box.

Product Features:

Direct replacement – this axle shaft assembly replaces the original equipment on specific vehicle years, makes and models
Ready to install – comes pre-assembled for simple installation with no further assembly required
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$624.99

4340 Chrome Moly axle shaft for Chrysler 10.5″ & 11.5″ rear. This is a cut to length axle which fits 36.1″ to 40.1″ lengths with 38 splines. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come with a limited lifetime warranty against manufacturing defects. The factory spindles will need to be machined in order to accept these axles.

Product Features:

38 spline
8 lug
Cut to length design fits 36.1″-40.1″ applications
Fits Chrysler 10.5″ and 11.5″
4340 Chromoly

from

$1550.00

Axle Kit

from

$574.99

Yukon right hand axle assembly for ’10-’13 Dodge 9.25″ front. This assembly uses a 1555 u/joint.

Product Features:

Fits 2010-2011 Chrysler 9.25″ front
Right hand side
Uses 1555 U-Joint
Complete assembly

from

$225.99

Yukon rear axle for Chrysler 10.5″ & 11.5″ (’03 and newer Dodge) with a length of 36 13/16″ and 30 splines. Yukon alloy axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:

30 spline
36 3/16″ long
Fits Chrylser 11.5″

Upgrade your 2023 Ram 2500 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2023 Ram 2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ram or enhancing its overall performance, Drivetrains are key to keeping your 2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Drivetrains for the 2023 Ram 2500, designed to meet your needs without breaking the bank. From Differential replacements to Universal Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2023 Ram 2500 at great prices. Our Drivetrains inventory for this model ranges from just $11.99 to $558.99, with an average price of $191.68. Our 20 Drivetrains in stock come from 8 trusted brands, so you’re sure to find the right part for your 2023 Ram 2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2023 Ram 2500, we stock popular OEM and aftermarket Drivetrains from top names like Castrol, Valvoline, Dorman, and more. Castrol Drivetrains start at just $14.79 and boast an impressive 4.9 stars average rating from customers. Valvoline and Dorman also bring quality to the table, with Drivetrains available starting at $15.99, and at an average 4.8 stars rating. With 5,731 customer reviews and counting, our 2023 Ram 2500 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals and more to make sure your 2023 Ram 2500 is always ready to roll. We’re committed to providing you with everything you need to keep your 2500 in top shape, all in one place. Start shopping confidently below for your 2023 Ram 2500!

Best-Selling Differentials for 2023 Ram 2500s

Enhance the driving experience in your Ram with 13 quality Differential components, starting at $11.99.

show more show less

from

$69.99

Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$14.79

Product Features:

Technologically advanced, full synthetic formulation provides superior transmission life
Engineered with superior base oils to ensure superb low and high temperature performance
Certified and approved for all Chrysler cars and trucks that require ATF+4«, Mopar ATF+3«, ATF+2«, ATF+2 Type 7176«, or ATF+«
Meets or Exceeds Fiat Chrysler ATF+4« requirements.
Packaged in a convenient 1-quart size for easy handling and precise application during maintenance.

from

$11.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$11.99

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$18.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$13.99

Crush Sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS & 9.5″. Approx 0.640″ long.

Product Features:

Crush sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS and 9.5″
0.640″ tall

from

$319.99

Axle Shaft

from

$558.99

Constructed out of durable cast aluminum
Wrinkle-black powder-coating with machined fins
Dual neodymium magnetic plugs are used for maximum gear protection
Large oil level sight glass with calibration plug set to the factory oil level to eliminate overfilling

from

$535.99

Axle shaft damaged or bearings worn out? This axle shaft assembly directly replaces the original equipment on certain vehicles, ready for install right out of the box.

Product Features:

Direct replacement – this axle shaft assembly replaces the original equipment on specific vehicle years, makes and models
Ready to install – comes pre-assembled for simple installation with no further assembly required
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$529.99

DiffrlCarr

from

$494.99

RngPnnKt

from

$409.99

Spider gear kit
Fits 2007 and up Chrysler 9.25″ front open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$393.99

aFe Power’s new front differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. This cover has a raw finish with machined fins for a distinctive look._x000d__x000d_Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration._x000d__x000d_Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling._x000d__x000d_Magnetic Plug: This system incorporates a magnetic drain plug to capture loose particles for maximum protection._x000d__x000d_Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling._x000d__x000d_Optional Accessories Available: Our optional oil level sight glass (Part Number: 46-00001) and deep reach magnetic fill plug (Part Number: 46-00002) are great additions to combine with this cover._x000d__x000d_When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:

Constructed out of durable cast aluminum
Neodymium magnetic drain plug for gear protection
Calibration plug set to the factory oil level to eliminate overfilling
Fits AAM 9.25-12 bolt front axles

Top Picks for 2023 Ram 2500 Transfer Cases

Upgrade Ram 2500s with top-quality Transfer Cases parts, including 1 OEM and aftermarket selections for your 2023 model.

show more show less

from

$15.99

Direct replacement – this transfer case control lever bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Drive Shafts and Axles for 2023 Ram 2500s

Select from 3 premium Drive Shafts and Axles parts for your 2023 Ram 2500, with prices ranging from $44.99 to $125.99.

show more show less

from

$44.99

9.25″ AAM front solid axle inner axle seal, 2003 & up Dodge Ram 2500/3500.Yukon Mighty seal.

Product Features:

Front inner axle seal
Fits Chrysler 9.25″ front

from

$125.99

UniversalJoint

from

$76.99

Top-Rated Drivetrains Brands For Your 2023 Ram 2500

Shop for the best-rated brands offering Drivetrains and other products for your 2023 Ram 2500s. Below you’ll find some of our best rated Drivetrains from Castrol, Valvoline, and Dorman, and more. Drivetrains from these brands that fit a 2023 2500 start at just $14.79 and are rated as high as 4.9 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Castrol 2023 Ram 2500 Drivetrains

When it comes to maintaining or upgrading your 2023 Ram 2500, using quality Drivetrains is essential to ensure durability and a perfect fit. Castrol ticks all of those boxes. We offer a wide selection of Castrol Drivetrains, specifically designed for the 2023 Ram 2500. With over 1 Castrol brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.79. Plus, with over 146 customer reviews and an average rating of 4.9 stars, you can trust that our Castrol Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.79

(146)

Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart

“Perfect”

Popular Valvoline 2023 Ram 2500 Drivetrains

Valvoline auto parts is one of the highest quality Drivetrain brands in the market. Any 2023 Ram 2500 owner should feel confident when installing genuine Valvoline parts in their vehicle. To ensure the best fit and performance for your 2023 2500, Advance Auto Parts carries a full inventory of 1 Valvoline Drivetrains. Plus you will be keeping your Ram in peak condition while saving money because prices on these Valvoline Drivetrains range up to $69.99, plus, with more than 364 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $69.99

(364)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon

“Happy with purchase”

FAQs for 2023 Ram 2500 Drivetrains

Which Drivetrains are best-sellers for 2023 Ram 2500s?

Out of 20 Drivetrains that fit 2023 Ram 2500s, the following parts are the top sellers:

DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (12079139) – $11.99
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (12507273) – $18.99
Greaseable Premium Universal Joint (10198450) – $49.99

What’s the price range for 2023 Ram 2500 Drivetrains?

Drivetrain prices for the 2023 Ram 2500 start at $11.99 and go up to $558.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2023 Ram 2500?

The average price for Drivetrains for the 2023 Ram 2500 is $191.68. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Ram 2500 model years?

Yes, we currently carry Drivetrains for 13 model years of Ram 2500s between 2011 and 2025. Drivetrains are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Drivetrains for my 2023 Ram 2500?

The cheapest 2023 Ram 2500 Drivetrains we carry in stock are:

DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (12079139) – $11.99
Taper Bearing Cone (5050049) – $11.99
Crush Sleeve (11643360) – $13.99
Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (8140018) – $14.79
Shift Linkage Bushing (11241126) – $15.99

What are the top-rated Drivetrains that fit the 2023 Ram 2500?

Out of 5,731 reviews by customers, our 2023 Ram 2500 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2023 Ram 2500 and their top-rated products:

Differentials
- SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (12048191) – $69.99
- Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (8140018) – $14.79
- Taper Bearing Cone (5050049) – $11.99
Transfer Cases
- SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (12048191) – $69.99
- Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (8140018) – $14.79
- Taper Bearing Cone (5050049) – $11.99
Universal Joints
- SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (12048191) – $69.99
- Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (8140018) – $14.79
- Taper Bearing Cone (5050049) – $11.99

What types of Drivetrains do you sell for my 2023 Ram 2500?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2023 Ram 2500:

Can I get help with 2023 Ram 2500 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ram Drivetrains and more.

What is your return policy for Ram 2500 Drivetrains?

Advance Auto Parts keeps returns simple. For new Ram 2500 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2023 Ram 2500 Drivetrains

aFe POWER – Differential Cover (Part No.46-70392)

aFe POWER – Differential Cover (Part No.46-70402)

Yukon Gear – DiffrlCarr (Part No.20151)

Yukon Gear – C9.25 Aam & Dodge 07 & Up Front Beam Axle Open Loaded Carrier (Part No.20017)

Spicer – Universal Joint, Non-Greaseable, AAM 1485 Series OSR (Part No.5-3206X)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.296A)

Yukon Gear – Crush Sleeve (Part No.33099)

Pro-King – Crush Sleeve (Part No.723B034)

Spicer – Universal Joint (Part No.5-1350-1X)

Spicer – Drive Axle Shaft Universal Joint (Part No.5-3212X)

Yukon Gear – 9.25" Aam Front Solid Axle Inner Axle Seal, 2003 & Up Dodge Ram 2500/3500 (Part No.30236)

National – Drive Axle Shaft Seal (Part No.710874)

Mobil 1 – 75W-90 Full Synthetic Gear Lubricant, Extends Gear Life, 1 Quart (Part No.26101)

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

Yukon Gear – Ring and Pinion Kit (Part No.24685)

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 11.5" In A 4.88 Ratio (Part No.24445)

National – Bearing Race (Part No.382A)

National – Tapered Roller Bearing Cone (Part No.LM104949)

Driveworks – Tapered Roller Bearing (Part No.S-32210)

Dorman – Help – Shift Linkage Bushing (Part No.14078)

Motive Gear – Differential Carrier Gear Kit (Part No.GM9.5BI)

Yukon Gear – 2007 & Up 9.25" Chrysler Standard Open 33 Spline Straight Axle Front Spider Set (Part No.16067)

Yukon Gear – Axle For 03 & Up Chrysler 10.5/ 11.5Aam, 38Spline (Part No.21436)

Dorman – Axle Disconnect Kit (Part No.630-060)

Yukon Gear – 4340 Chrome Moly Axle Shaft For Chrysler 10.5" & 11.5" Rear (Part No.21702)

Yukon Gear – Axle Kit (Part No.21823)

Yukon Gear – Right Hand Axle Assembly For ’10-’13 Dodge 9.25" Front (Part No.21766)

Yukon Gear – Rear Axle For Chrysler 10.5" & 11.5" (’03 And Newer Dodge) Single Rear Wheel (Srw) (Part No.21441)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

Castrol – Transmax ATF+4 Transmission Fluid, Superior Transmission Life, 1 Quart (Part No.15A9FA)

Driveworks – Taper Bearing Cone (Part No.S-LM-104949)

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Yukon Gear – Crush Sleeve (Part No.33099)

Yukon Gear – Axle Shaft (Part No.21783)

aFe POWER – Differential Cover (Part No.46-70402)

Dorman – Axle Disconnect Kit (Part No.630-060)

Yukon Gear – DiffrlCarr (Part No.20151)

Yukon Gear – RngPnnKt (Part No.24772)

Yukon Gear – 2007 & Up 9.25" Chrysler Standard Open 33 Spline Straight Axle Front Spider Set (Part No.16067)

aFe POWER – Differential Cover (Part No.46-70400)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.479)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.291)

MOOG Driveline Products – Universal Joint (Part No.493)

Dorman – Help – Shift Linkage Bushing (Part No.14078)

Yukon Gear – 9.25" Aam Front Solid Axle Inner Axle Seal, 2003 & Up Dodge Ram 2500/3500 (Part No.30236)

Yukon Gear – UniversalJoint (Part No.42026)

Spicer – Drive Axle Shaft Universal Joint (Part No.5-3212X)