2020 Ram 2500 Drivetrains

This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

• Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
• Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
• Smart solution – delivers reliable fit and function for competitive price
• Trustworthy quality – backed by team of designers and engineers in the United States

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

This drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles
• Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 92-05; DODGE 84-10; GMC 92-05; RAM 11-20;. Please verify your application.

Product Features:

• MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
• HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
• READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
• For Years: 1984-2020
• Weight approx: 4 Lbs
• BEARING ID / BORE: 1.3780 INCH / 35 MM
• CENTERLINE: 2.28 INCH / 58 MM
• MOUNT WIDTH: 6.62 INCH / 168 MM
• STYLE: SQUARE FRAME

2007 & Up 9.25″ Chrysler standard Open 33 spline straight axle front spider set (not rear). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

• Spider gear kit
• Fits 2007 and up Chrysler 9.25″ front open differential
• Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

11.5AAM GM & Chrysler (fits All Years) UNIVERSAL standard Open spider gear kit.

Product Features:

• Spider gear kit
• Fits GM and Chrysler 11.5″ open differential
• Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:

• Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
• OEM cores are processed as individual units throughout the tear down and assembly process
• Cores cleaned using our Hydro Blast cleaning and rinse process
• All case halves wet sanded to ensure perfect mating surfaces
• Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
• Remanufactured in our ISO9001:2008 USA facility.
• Without Motor

Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:

• Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
• OEM cores are processed as individual units throughout the tear down and assembly process
• Cores cleaned using our Hydro Blast cleaning and rinse process
• All case halves wet sanded to ensure perfect mating surfaces
• Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
• Remanufactured in our ISO9001:2008 USA facility.
• Without Motor

Product Features:

• High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
• Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
• Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
• Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

• Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. Pro Series differential covers include an oil level sight glass and magnetic deep reach fill plug. This cover is finished with black powder-coating and machined fins for a distinctive look._x000d__x000d_Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration._x000d__x000d_Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling._x000d__x000d_Magnetic Plugs: This system incorporates a magnetic drain and deep reach fill plug to capture loose particles for maximum protection._x000d__x000d_Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling._x000d__x000d_Oil Level Sight Glass: A pre-installed oil level sight glass allows quick and easy oil inspection._x000d__x000d_When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:

• Constructed out of durable cast aluminum
• Wrinkle-black powder-coating with machined fins
• Dual neodymium magnetic plugs are used for maximum gear protection
• Large oil level sight glass with calibration plug set to the factory oil level to eliminate overfilling

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

• All products are designed to meet or exceed OE quality, form, fit and funtion.

Ring and Pinion Kit

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

• Fits GM and Chrysler 11.5″
• 11.50″ ring gear diameter
• 30 spline pinion
• 12 ring gear bolts
• 5.38 ratio

This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Our Spindle Nut Retainers are coated for high corrosion resistance and a long service life. Depending on the application, they are also available in a kit that includes the nut, washer, and retainer.

Product Features:

• Direct replacement Spindle Nut Retainers available (where applicable) for a proper fit every time
• A wide range of thread and hex sizes available
• Conveniently offered in many styles and in packs of different quantities
• Dorman’s Spindle Nut Retainers are constructed to strict engineering quality standards

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:

• Fits GM and Chrysler 11.5″ with 30 spline axles
• Patented internal design reduces common locker failures
• 8620 internals for added strength
• Assembled in the USA

Product Features:

• Standard open carrier case
• Includes spider gears
• Fits 2007 and up Chrysler 9.25″ front

YYukon left hand axle assembly for ’10-’13 Dodge 9.25″ front. This assembly uses a 1555 u/joint.

Product Features:

• Fits 2010-2011 Chrysler 9.25″ front
• Left hand side
• Uses 1555 U-Joint
• Complete assembly

Product Features:

• Fits Chrysler 10.5″
• 36.75″ long
• Full Float axle

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

• All products are designed to meet or exceed OE quality, form, fit and funtion.

10.5″ Dodge crush sleeve. Approx 2.310″ long.

Product Features:

• Crush sleeve
• Fits Chrysler 10.5″
• 2.310″ tall

11.5″ Chrysler & GM cover gasket.

Product Features:

• Cover gasket
• Fits GM and Chrysler 11.5″

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Replacement right hand front inner axle seal for Dana 60 2001, Dodge 3/4 & 1-ton.Yukon Mighty seal.

Product Features:

• Inner axle seal
• Fits Dodge Dana 60
• Right hand side

9.25″ AAM front solid axle inner axle seal, 2003 & up Dodge Ram 2500/3500.Yukon Mighty seal.

Product Features:

• Front inner axle seal
• Fits Chrysler 9.25″ front

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.