2022 GMC Canyon Exhaust Parts

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
• BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93421 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2004-2005 Chevrolet Colorado and 2004-2005 GMC Canyon, this direct-fit catalytic converter also interchanges with OE parts 15139252 and 15098755. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51656. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52609. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2015-2020 Chevrolet Colorado and 2015-2020 GMC Canyon, this direct-fit catalytic converter also interchanges with OE parts 84414670 and 94779898. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker® Ultra® EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49327. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2006 Chevrolet Colorado, 2004-2006 GMC Canyon, and more, this direct-fit catalytic converter also interchanges with OE part 12571604. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52612. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2015-2016 Chevrolet Colorado and 2015-2016 GMC Canyon, this direct-fit catalytic converter also interchanges with OE parts 19420272 and 23343108, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23966 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2004-2012 Chevrolet Colorado, 2004-2012 GMC Canyon, and more, this direct-fit catalytic converter also interchanges with OE parts 15295272 and 15098756. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker® Ultra® Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50664. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2004-2012 Chevrolet Colorado, 2006-2008 Hummer H3, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49611 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 2004-2005 Chevrolet Colorado and 2004-2005 GMC Canyon, this direct-fit catalytic converter also interchanges with OE parts 15139252 and 15098755. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
• Convenient kit – includes gaskets and downpipe hardware to simplify installation
• Durable construction -manufactured within strict tolerances for reliable longevity
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker® Ultra® Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.

3-1/2″ Black Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2″ black stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look.

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

3-1/2″ Polished Middle-Side Exit Tips:Finishing off the exhaust are dual 3-1/2″ polished stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenge

Product Features:

• Unique Dual Center Exit Exhaust System
• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19019 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Double Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19019 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19019 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

This MACH Force-Xp Hi-Tuck cat-back exhaust system exhaust delivers pure power and sound. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno (tested on 2015 GMC Canyon V6-3.6L). Made of 3″ mandrel-bent, stainless steel tubing for maximum flow means the smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. This exhaust system is finished off with a Hi-Tuck tip to give you extra ground clearance during extreme angle climbs or descents protecting the exhaust over rough terrain.

Product Features:

• +10 ft. x lbs. TQ & +9 HP
• 3 in. 409 Mandrel Bent Stainless Steel Tubing
• Hi-Tuck Tip To Give Extra Ground Clearance
• Stainless Steel Muffler To Absorb High Pitch Tones

The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:

• Aggressive Sound
• OE Style Hangers
• Hassle Free Installation
• Polished Stainless Tip Included

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• 3 in. Mandrel Bent Stainless Steel
• 100% Hand TIG Welded
• Leak Free Seal
• Aggressive Sound

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• 3 in. Mandrel Bent Stainless Steel
• 100% Hand TIG Welded
• Leak Free Seal
• Aggressive Sound

409 Stainless Steel:Constructed out of 3″ mandrel-bent, 409 stainless steel tubing, this system is less restrictive than stock – allowing for maximum flow and low turbulence, improving power and throttle response.OE Fit:OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.Hi-Tuck Intercooled Tip:This exhaust system is finished off with a 4″ hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents, protecting the exhaust over rough terrain. It features a high temperature black powder-coated finish and patent pending intercooled design, that reduces exhaust gas temperatures by 40%.

Product Features:

• Constructed from Stainless Steel Tubing for Strength and Durability
• Utilizes OE-style Bayonet Hangers for a Secure Fit
• Utilizes OE-style Bayonet Hangers for a Secure Fit
• Hi-tuck Design Provides Increased Ground Clearance

This MACH Force-Xp Hi-Tuck cat-back exhaust system exhaust delivers pure power and sound. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno (tested on 2015 GMC Canyon V6-3.6L). Made of 3″ mandrel-bent, stainless s teel tubing for maximum flow means the smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. This exhaust system is finished off with a Hi-Tuck tip to give you extra ground clearance during extreme angle climbs or descents protecting the exhaust over rough terrain.

Product Features:

• +10 ft. x lbs. TQ & +9 HP
• 3 in. 409 Mandrel Bent Stainless Steel Tubing
• Hi-Tuck Tip To Give Extra Ground Clearance
• Stainless Steel Muffler To Absorb High Pitch Tones

The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• OE Style Flange
• No Bungs
• Hassle Free Installation

This Rebel Series cat-back exhaust delivers power and sound by adding horsepower and torque as measured on our in-house dyno. Dual polished tips exit in front of the rear passenger side tire to make this system look as good as it performs. Factory mounting locations provide a stable and hassle-free installation.

Product Features:

• High-Flow Stainless Steel Muffler
• Mandrel Bent Stainless Steel Tubing
• Bolt-On Installation
• Hardware Included

aFe POWER Large Bore-HD Hi Tuck exhaust system is designed to provide extra ground clearance during extreme angle climbs or descents. Constructed from mandrel-bent stainless steel tubing, this exhaust system offers performance across the power band and delivers a deep, aggressive exhaust tone. This system utilizes a less-restricting, high-flow muffler to improve performance. 100% hand MIG-welded by certified craftsmen for proven quality and durability.

Product Features:

• Constructed from Stainless Steel Tubing for Strength and Durability
• Utilizes OE-style Bayonet Hangers for a Secure Fit
• Mandrel-Bent Tubing for Smooth Transitions and Increased Power
• Stainless Clamps for Improved Sealing Surface

The aFe MACH Force-Xp cat-back exhaust system exceeds your quality and performance expectations. Mandrel bent 409 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash sound and performance. Large diameter stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

Product Features:

• Improved Flow And Durability
• Deep Aggressive Tone Muffler
• MIG Welded
• Hassle Free Installation