from

$11.49

Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:

Four Metal Valve Stems
Press-in interchangeable metal valve stem
Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
Press release valve design allows easy installation without a tool for sensor head fitting
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$361.99

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$3.49

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$2.99

Rubber – straight in screw

from

$3.49

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits and tools.

Product Features:

TPMS Snap-in stem for GM, Ford
Includes stepped screw.
0.453″ rim hole compatibility
80 PSI maximum cold inflation pressure

from

$5.99

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Product Features:

OE – validated part identical to the dealer
Rubber snap-in stem
Press clip design
No tools for press clip installation
TPMS service kits are required whenever performing tire replacement or service
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$3.29

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.49

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$8.29

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$484.99

Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For aluminum wheels only.
Requires 65200, 65400, 65500, 65301 or 65302 Installation Tool sold separately.

from

$974.99

Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Bulk box of 144.

from

$34.99

Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.

Product Features:

Guaranteed for life not to rust, chip, or peel.
Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.

from

$124.99

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:

For use on “Tuner” wheels or wheels with very small lug nut holes.
User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For aluminum wheels only.

from

$40.49

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$44.99

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For use under wheel covers, center caps and hub caps.
Will accept O.E.M. GM screw on plastic lug nut caps.

from

$189.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear (where applicable)
EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out (where applicable)
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
CORROSION PROTECTION — Application-specific coated wheel studs resist corrosion and rust for easier removal and proper torqueing
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$157.99

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$231.99

Carquest Professional hub assemblies are designed by a leading original equipment manufacturer (O.E.M.) and built to meet or exceed OE specifications for a perfect fit and proven performance. Carquest Professional hub assemblies feature bearings and seals that are designed for each specific vehicle application for a more durable repair solution. These hub assemblies are rigorously tested to ensure long-lasting performance that is guaranteed with an industry-leading warranty.

Product Features:

Manufactured on a semi-automated production line that helps ensure superior quality
Multiple tests completed to ensure long-lasting performance
All ABS sensors are tested for proper signal functionality
Enhanced corrosion resistant wheel studs to reduce rust build-up
Precision-machined to stringent tolerances provided high quality and longer endurance
Bearings and seals are constructed and engineered to the requirements of vehicle application
Roll-form bearing design applies exact preload for increased durability (where applicable)

from

$2.29

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$3.83

Wheel Stud

from

$6.99

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$51.99

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$53.99

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:

Rubber clamp-in stem.
Works with most major TPMS Scan tools
Reduces SKUs
OE Designed and Validated
Advance anodization of valve stems and hex nuts
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$43.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Maximum Signal Strength, Battery Reliability.
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Meets SAE Standards J1205 and J1206
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$249.99

The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Set of 20 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch

2020 Chevrolet Traverse Wheels and Tires

More 2020 Chevrolet Traverse Wheels and Tires Categories

Essential 2020 Chevrolet Traverse Wheels and Tires

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)

Schrader – TPMS Sensor Service Kit (Part No.20018)

Huf North America – Rubber – straight in screw (Part No.RDV043)

Dill Air Control – Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece (Part No.VS-20)

REDI-Sensor – Rubber snap in stem with metal press clip teeth (Part No.SE54196)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Acorn, 1.38" Length, Chrome (Sold by each) (Part No.611-185)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Acorn, 1.39" Length, Chrome, 1 Pack (Part No.611-186.1)

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Acorn, 1.37 in Length, Chrome, 4 Pack (Part No.711-601)

McGard – Black Cone Seat SplineDrive Lug Nuts (M14 x 1.5 Thread Size) – Box of 50 Lug Nuts (Part No.65037)

McGard – Black Cone Seat Style Lug Nut Set (M14 X 1.5 Thread Size) – box of 144 Lug Nuts (Part No.69472)

McGard – Black Bulge Cone Seat Style Lug Nut Set (M14 X 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64074)

McGard – Black Tuner Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4; Set of 4 Locks and 1 Key (Part No.25116)

Dorman – Wheel Lug Nut & Lock Set: M14-1.50 Thread, Conical 60, Acorn, 1.432" L, Chrome, 16 Nuts/4 Locks/1 Key (Part No.711-641)

McGard – Cone Seat- Under Hub Cap Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24019)

MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Rear, 6 Studs (Part No.512657)

Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-639467)

Carquest Professional – Hub Assembly with Wheel Bearing 91-257974 (Part No.91-257974)

Dorman – M14-1.50 Serrated Wheel Stud – 16.01mm Knurl, 57.93mm Length (Part No.610-434)

Dorman – Wheel Stud (Part No.O8060833065DOR)

Dorman – Pik-a-Nut – Wheel Stud : Serrated Stud, M14-1.50 Thread Size, RHT, 1 Pack (Part No.97064.1)

Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)

REDI-Sensor – REDI-Sensor Rubber Snap-in Stem 315 Mhz — 1 Sensor (Part No.SE10006)

Autel – Adjustable Angle Programmable Universal TPMS Sensor Metal – 315MHz and 433MHz (Part No.300030)

McGard – Black Cone Seat Wheel Installation Kit for 6 Lug Vehicles (M14 x 1.5 Thread Size) (Part No.84640)

Popular 2020 Chevrolet Traverse Wheels and Tires Categories

2020 Chevrolet Traverse Wheels and Tires

Top-Rated Wheels and Tires Brands For Your 2020 Chevrolet Traverse

Popular Dill Air Control Wheels and Tires

Top-Rated Schrader Wheels and Tires

FAQs for 2020 Chevrolet Traverse Wheels and Tires

What are the most purchased Wheels and Tires for the 2020 Chevrolet Traverse?

What are the top-rated 2020 Chevrolet Traverse Wheels and Tires?

More Popular Parts for All Makes