2021 Chevrolet Traverse Wheels and Tires
More 2021 Chevrolet Traverse Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2021 Chevrolet Traverse, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2021 Chevrolet Traverse Wheels and Tires
Driveworks – Wheel Hub Assembly (Part No.NT513277)
from
$189.99
DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Integral raceway provides proper clearance between the ball and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
- Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
- Brand may vary by location
ACDelco – GM Original Equipment Wheel Hub and Bearing Assembly (Part No.K7001440195ACD)
from
$212.47
An ACDelco GM Original Equipment Wheel Bearing and Hub Assembly is complete wheel bearing and wheel hub assemblies. The unitized wheel bearing contains dual ball or tapered roller bearing elements sealed with lifetime lubrication and supports the vehicle while allowing the wheel to rotate. This original equipment wheel bearing and hub assembly is engineered to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Bearings and Oil Seals. Stay with the brand of parts your vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Bearings and Oil Seals are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. ACDelco offers a variety of bearings and seals for your GM vehicle, such as wheel hub bearings, generator/alternator bearings, front and rear wheel seals, rear axle seals, etc. When smooth, efficient performance is critical, choose ACDelco.
Product Features:
See More
Product Features:
- High quality materials ensure long service life
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Wheel Bearing and Hub Assembly: Front/Rear, 6 Studs (Part No.951-305)
from
$219.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Product Features:
See More
Product Features:
- Complete repair – this assembly includes the wheel hub and application-specific bearing components
- Saves time – eliminates work required to remove individual corroded components
- Reliable fit – precision-engineered to match the dimensions of original equipment
- Trustworthy quality – engineered and tested in the United States
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.21507)
from
$40.99
Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: 1 for 1 replacement sensor
- QUICK AND EASY: TPMS sensors are ready out of the box
- VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
- SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
- RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)
from
$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Black Anodized Valve Stem (Part No.VS925B)
from
$9.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Black anodized clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatibility
- 200 PSI maximum cold inflation pressure
REDI-Sensor – TPMS Service Kit, REDI-Sensor and OE Style (Part No.SE54190)
from
$4.49
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Electroless nickel-plated valve cores
- Advanced anodization of valve stems and hex nuts
- Includes torque specifications and installation instructions
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
REDI-Sensor – Rubber snap in stem with metal press clip teeth (Part No.SE54196)
from
$5.99
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Rubber snap-in stem
- Press clip design
- No tools for press clip installation
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autopart International Inc – Wheel Hub Assembly (Part No.K70011941557API)
from
$155.28
Wheel Hub Assembly
Carquest Premium – Wheel Bearing and Hub Assembly (Part No.91-705596)
from
$185.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
MOOG Hub Assemblies – Wheel Bearing and Hub Assembly: Rear, 6 Studs (Part No.512657)
from
$189.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear (where applicable)
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out (where applicable)
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Application-specific coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
REDI-Sensor – REDI-Sensor Metal Clamp-in Stem 433 Mhz — 1 Sensor (Part No.SE10008)
from
$53.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Metal clamp-in stem.
- Works with most major TPMS Scan tools
- Reduces SKUs
- OE Designed and Validated
- Advance anodization of valve stems and hex nuts
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
VDO REDI-Sensor – VDO Rubber Snap-in Stem REDI-Sensor (Part No.SE10001HPR)
from
$49.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Installs right out of the box
- No sensor programing required
- Works with all major TPMS scan tools
- No training required – designed to follow existing OE vehicle relearn procedures
- Faster TPMS scan tool hunt mode
- Reduces SKUs
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
REDI-Sensor – REDI-Sensor Rubber Snap-in Stem 315 Mhz — 1 Sensor (Part No.SE10006)
from
$53.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Rubber clamp-in stem.
- Works with most major TPMS Scan tools
- Reduces SKUs
- OE Designed and Validated
- Advance anodization of valve stems and hex nuts
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
McGard – Chrome Cone Seat Style Lug Nuts (M14 x 1.5 Thread Size) – Box of 100 Lug Nuts (Part No.69424)
from
$429.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers.; Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Bulk box of 100.
McGard – Chrome Cone Seat SplineDrive Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4 (Part No.65310)
from
$44.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For aluminum wheels only.
- Requires 65301 or 65302 Installation Tool sold separately.
McGard – Black Cone Seat Style Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64024)
from
$29.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)
from
$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.
Product Features:
See More
Product Features:
- Includes 4 Rubber Press-in Valve Stems
- Compatible with Autel 1-Sensors
- Compatible with Autel 315MHz & 433MHz MX-Sensors
- Warranty on Material and Workmanship
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Dill Air Control – Clamp-In TPMS Service Kit: Metal, Chrome Valve Stem Assembly, 1 Piece (Part No.VS-70C)
from
$13.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- TPMS Chrome valve stem assembly for OE and REDI-Sensor
- 0.453″ rim hole compatiblity
- 200 PSI maximum cold inflation pressure
Dill Air Control – Snap-In TPMS Service Kit: Rubber, 0.453 Inch Stem (Part No.VS950)
from
$4.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- TPMS Snap-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatibility
- 80 PSI maximum cold inflation pressure
Dorman – Wheel Lug Nut: M14-1.50 Thread, Flanged, Duplex Mag, 1.659" Length, Chrome, 1 Pack (Part No.611-279.1)
from
$3.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
McGard – Chrome Bulge Cone Seat Style Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.64033)
from
$49.99
Chrome plated lug nuts lead a tough life. Think about it, harsh elements, nasty corrosive wheel cleaners and lead-foot drivers. Not to mention overzealous impact guns and loose fitting lug wrenches. This kind of treatment destroys ordinary lug nuts which turns even the best looking wheels ugly. Tough Nuts can take the punishment and keep your wheels looking beautiful. Tough Nuts are guaranteed for life not to rust, chip or peel. They are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. Tough Nuts are designed and built for the real world, because life is tough. Bulge Style Cone Seat lug nuts have an extended seating surface that is designed to match the wider seating surface used on some aluminum wheels.
Product Features:
See More
Product Features:
- Guaranteed for life not to rust, chip, or peel.
- Every McGard Tough Nut lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
McGard – SplineDrive Lug Nut Installation Tool for McGard SplineDrive Lug Nuts (Part No.65302)
from
$44.99
SplineDrive Installation tool for use only with McGard SplineDrive lug nuts with a M14x1.5 thread size. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- For use only with McGard SplineDrive lug nuts with a M14x1.5 thread size.
- Installation Tool has 22mm Hex Size
McGard – Chrome Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.24210)
from
$34.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
McGard – Black Tuner Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4; Set of 4 Locks and 1 Key (Part No.25116)
from
$124.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- For use on “Tuner” wheels or wheels with very small lug nut holes.
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
McGard – Black Tuner Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4; Set of 4 Locks and 1 Key (Part No.25112)
from
$104.99
Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- For use on “Tuner” wheels or wheels with very small lug nut holes.
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- For aluminum wheels only.
Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Bulge, 0.87" Length, Chrome, 4 Locks/1 Key (Part No.711-626)
from
$20.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 2021 Chevrolet Traverse Wheels and Tires Categories
2021 Chevrolet Traverse Wheels and Tires
You count on your 2021 Chevrolet Traverse to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 54 Wheels and Tires ranging in price from $2.99 to $7,321.99, you’re sure to find everything you need for your 2021 Chevrolet Traverse.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 10 different brands like Dorman, Autel, and Schrader. 2021 Chevrolet Traverse Wheels and Tires start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 234 extensive product reviews on 2021 Chevrolet Traverse Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 0.832" Length, Chrome, 4 Pack with 5.0 stars and Chrome Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key with 4.0 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2021 Chevrolet Traverse below to get started!
Top-Rated Wheels and Tires Brands For Your 2021 Chevrolet Traverse
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2021 Chevrolet Traverse running right for years to come. In our inventory you’ll find brands like Dorman, Autel, Schrader, and even more.
Popular Dill Air Control Wheels and Tires
You’ll find popular Dill Air Control brand products across TPMS Sensor Kits. All are waiting to get your 2021 Chevrolet Traverse back on the road. Some of the top-rated Dill Air Control products in these categories are:
from
$3.49
(1)
Snap-In TPMS Service Kit: Rubber, Includes Stepped Screw, 1 Piece
Tire Pressure Sensor Service Kits
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 2021 Chevrolet Traverse, and some of our most reviewed parts include:
from
$41.99
(69)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Tire Pressure Sensors
FAQs for 2021 Chevrolet Traverse Wheels and Tires
What are the most purchased Wheels and Tires for the 2021 Chevrolet Traverse?
Out of 54 Wheels and Tires for the 2021 Chevrolet Traverse, the most popular in our inventory are:
from
$4.79
This product is not rated
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Flattop Capped, 1.752" Length, Chrome (Sold by each)
Wheel Lug Nuts
from
$4.99
(1)
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Dometop, 1.752" Length, Chrome, 1 Pack
Wheel Lug Nuts
What are the top-rated 2021 Chevrolet Traverse Wheels and Tires?
Top-rated Wheels and Tires for your 2021 Chevrolet Traverse based on customer reviews/ratings are:
from
$8.29
(4)
Wheel Lug Nut: M14-1.50 Thread, Conical 60, Bulge Open End, 0.832" Length, Chrome, 4 Pack
“Worked great for what I needed these for”
from
$34.99
(2)
Chrome Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key
“Replaced old wheel locks after loosing the Key.”
from
$11.49
(1)
Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.
“Says on site these are Universal and will be compatible with 2015 Patriot. They are not. Will not fit in existing jeep sensors. Waste of time with veh”
