2019 Toyota Land Cruiser Motor Oil

FRAM Engine Oil SAE 5W-30 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Synthetic Blend: Our unique combination of synthetic and premium conventional oils provides superior protection against wear, friction, heat, and deposits.

FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
• Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
• Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 10W-30 is formulated with high-quality synthetic base stocks and the latest additive technology to provide the ultimate protection for your engine.
• Advanced LSPI Prevention: Contains additive technology specifically designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines.
• Enhanced Wear Protection: Offers increased wear protection, ensuring your engine components remain in optimal condition even under rigorous driving conditions.
• Versatile Engine Compatibility: Suitable for a wide range of engines, including GDI, TGDI, carbureted, and normally fuel-injected engines, making it a versatile choice for various vehicle types.

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

• Patented phosphorus replacement technology to help extend the life of your emission system
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection (as measured in latest sequence iva engine test)
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
• Improved High Temperature Performance: With Fluid TITANIUM Technology, this engine oil provides up to 10X better high temperature performance than the latest industry standard, ensuring optimal protection and oil flow over the drive cycle.

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
• Versatile Grades: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean caters to various engine requirements and driving conditions.
• Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
• Synthetic Blend Composition: The GTX Ultraclean 5W-20 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (When tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Trusted Brand: With over 50 years of innovation and trust, Castrol GTX has evolved to meet the needs of both consumers and vehicle manufacturers since 1968.
• Adaptable to Severe Conditions: Designed to perform under severe driving conditions such as heavy traffic, poor fuel quality, and harsh driving environments.
• This premium conventional motor oil, with an SAE oil weight of 10W-30, meets the standard oil class requirements for a wide range of vehicles.

You count on your gas-powered truck or SUV for more than just transportation. For a motor oil that works as hard as you do, you can trust Mobil 1 Truck & SUV full-synthetic motor oil 0W-20. Mobil 1 Truck & SUV utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine protection and cleanliness to your engine for up to 10,000 miles between oil changes, (1) and proven performance in a 10,000 lb. towing test. (2) Mobil 1 Truck & SUV full-synthetic motor oil 0W-20 is also 10% more resistant to oil breakdown (3) and meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping your fuel economy. Mobil 1 is America’s No. 1 selling synthetic motor oil brand at retail, (4) trusted recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®. ( (1) Protects for up to 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Please reference your vehicle owner’s manual for information on your engine’s maximum towing / hauling capacity. (3) Versus leading synthetic competitors in proprietary oxidation test. (4) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending Feb 25, 2023)

Product Features:

• Mobil 1 Truck & SUV advanced full-synthetic motor oil 0W-20 is specially formulated for hardworking trucks and SUVs that operate in tough conditions like towing and hauling.
• Helps to protect critical engine parts for up to 10,000 miles between oil changes, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Utilizes Mobil 1â¿¿s signature Triple Action Formula to deliver outstanding engine protection, cleanliness, and proven performance in a 10,000 lb. towing test(2)
• Utilizes Mobil 1Γ┐┐s signature Triple Action Formula to deliver outstanding engine protection, cleanliness, and proven performance in a 10,000 lb. towing test(2)
• Additives that help prevent deposit formation
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Keeps your engine running like new by providing unsurpassed wear protection
• Manufacturer Part Number: 124571
• Increased Oil Breakdown Resistance: This motor oil is 10% more resistant to oil breakdown compared to leading synthetic competitors, ensuring longer-lasting protection for your engine.
• Meets ILSAC GF-6 Standards: Mobil 1 Truck & SUV full-synthetic motor oil 0W-20 meets ILSAC GF-6 standards, providing low-speed pre-ignition (LSPI) and timing chain wear protection while helping to improve fuel economy.
• Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR«.
• Trusted Brand: Mobil 1 is America’s No. 1 synthetic motor oil brand at retail, trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR®.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (Based on API and ACEA volatility specifications)
• Improved fuel economy (In 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Synthetic Blend Composition: Castrol GTX High Mileage Motor Oil is a synthetic blend, offering the benefits of both conventional and synthetic oils for superior engine protection.
• Extended Engine Life: Designed to protect against sludge, wear, and burn-off, this motor oil helps extend the life of high mileage engines.
• Optimal Viscosity: With an SAE oil weight of 10W-30, this motor oil provides excellent performance in a wide range of temperatures, ensuring reliable engine protection.

Castrol EDGE Extended Performance with Fluid TITANIUM Technology is Castrol’s most advanced full synthetic and the natural choice for drivers who demand outstanding performance and the assurance of protection during today’s longer drain intervals. It provides protection for 20,000 miles or a full year – guaranteed. Castrol EDGE Extended Performance features some of the best attributes of Castrol’s patented Fluid TITANIUM Technology that transforms its structure to be stronger under pressure. It helps keep metal apart to fight power-robbing friction, providing wear protection 6X better than required by the industry standard, while protecting under extreme conditions with 10X better high temperature performance.  Castrol EDGE Extended Performance provides the strength to extend drains for 20,000 miles and the muscle to maintain viscosity stability under the extreme force of the engine and protection from wear.  Unlock maximum engine performance.

Product Features:

• Extended drain interval of 20,000 miles or a full year (Whichever comes first)
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection (As measured in the latest Sequence IVA engine test)
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)

FRAM Engine Oil SAE 5W-20 utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-20 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Reliable engine protection: FRAM Conventional Oil 5W20 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Protection: Valvoline Full Synthetic High Mileage Engine Oil is specially designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits, ensuring a longer lifespan for your vehicle.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• MAXLIFE TECHNOLOGY PREVENTS engine breakdown with 40% better wear protection than the industry standard
• REFRESH AGING SEALS AND PREVENT LEAKS with seal conditioners
• REDUCE SLUDGE, DEPOSITS, CORROSION, AND RUST with added detergents – keep motors clean inside
• ENHANCED FRICTION PERFORMANCE HELPS MAXIMIZE POWER with advanced friction-fighting agents
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• MaxLife Technology: Valvoline High Mileage with MaxLife Technology is specially formulated to maximize engine life in vehicles with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits.
• Synthetic Blend Composition: This motor oil features a unique combination of synthetic and premium conventional oils, ensuring optimal performance and protection for high-mileage engines.

Keep your engine running at peak efficiency while improving fuel economy. Engineered for today’s advanced engines, Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 helps to improve fuel economy(1) and extend engine life for vehicles of all ages. Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to your vehicle. Same oil. Less waste. Mobil 1 12 quart convenience pack (bag in box) uses 87% less plastic and is manufactured in a zero waste to landfill facility. Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is recommended by ExxonMobil for all types of modern vehicles, including high-performance, turbo-charged, and supercharged gasoline and diesel multi-valve fuel-injected engines found in passenger cars, SUVs, light vans, and light trucks. Mobil 1 is America’s #1 selling synthetic motor oil brand at retail,(2) trusted and recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1)Potential fuel economy improvement obtained by switching from higher-viscosity oils to a lower-viscosity grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, and your current engine oil viscosity. (2)Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO full-synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 Advanced Fuel Economy full-synthetic motor oil 0W-20 is low-viscosity to help improve fuel economy.(1)
• Utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
• Helps protect critical engine parts for up to 10,000 miles between oil changes,(2) controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
• Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
• Helps extend engine life by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
• Manufacturer Part Number: 125219

FRAM Engine Oil Full Synthetic SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-20 and is a fully licensed GM dexos®1 Gen 2 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-20 meets stringent API: SP, SN, SM, SL, SJ, GM dexos«1 Gen 2, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
• Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for GDI and TGDI engines, thereby reducing the risk of pre-mature engine failure.
• Versatile Compatibility: Suitable for gas-direct engine (GDI), turbo gas-direct engine (TGDI), carbureted, and normally fuel-injected engines, making it a versatile choice for various engine types.
• Fully Licensed GM dexos«1 Gen 2: This oil is fully licensed as GM dexos«1 Gen 2 motor oil, ensuring it meets the high standards required by General Motors for optimal engine performance.

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

• Patented Phosphorus Replacement Technology to help extend the life of your emission system
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection (As measured in latest Sequence IVA engine test)
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
• Full Synthetic Composition: The 0W-20 full synthetic oil composition provides superior performance and protection, making it ideal for high mileage cars that operate under extreme temperatures.
• Enhanced Engine Performance: Designed to help your car defy its miles, Castrol EDGE High Mileage helps maintain and extend maximum performance and efficiency as your vehicle ages.
• Optimal for High Mileage Vehicles: Specifically formulated for high mileage cars, this oil helps prevent performance loss and efficiency decline, ensuring your vehicle runs smoothly even as it ages.

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for high mileage engines: FRAM High Mileage 10W30 Engine Oil is designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines, making it the perfect choice for vehicles with over 75,000 miles.

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Unsurpassed thermal breakdown protection: GTX Engine Oil, 10W-40 provides superior protection against thermal breakdown, ensuring that your engine stays protected even under extreme temperatures.
• Prevents harmful sludge build-up: GTX Engine Oil, 10W-40 is specially engineered to prevent the build-up of harmful sludge, which can rob your engine of its power and ultimately its life.

FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Ultimate Protection for High Mileage Engines: Designed for engines with over 75,000 miles, this oil provides the ultimate protection, making it ideal for higher mileage vehicles.
• Advanced LSPI Prevention Technology: Contains additive technology to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct injection (GDI) and turbo gas-direct injection (TGDI) engines, helping to prevent premature engine fai

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Superior corrosion protection
• High Performance: SAE 0W-20 Synthetic Engine Oil is specially formulated to provide high performance for gasoline and diesel engines of all types, including cars, trucks, SUVs, motorcycles, and boats.

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil, offering unparalleled sludge protection, wear protection, and maximum engine performance. It is 3X stronger against viscosity breakdown than the leading full synthetic, based on the Kurt Orbahn test in 5W-30 grade, and delivers 10X better high-temperature performance as measured in the Seq IIIH engine test versus the API SP limit. Additionally, it provides 6X better wear protection, as measured in the Seq IVA test against the latest test limit. This oil meets a wide range of specifications, including API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, ACEA C5, GM dexos1 Gen 2, Ford WSS-M2C962-A1, and WSS-M2C947-B1, and meets the engine test requirements of Chrysler MS 6395. Available in various grades, including 0W-20, 0W-30, 0W-40, 5W-20, 5W-30, 5W-40, 5W-50, 10W-30, and 10W-60, Castrol EDGE is the natural choice for drivers seeking the best in engine performance.

Product Features:

• 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
• 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
• 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
• Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, ACEA C5, GM dexos1 Gen 2, Meets Ford WSS-M2C962-A1 and WSS-M2C947-B1, Meets engine test requirements of Chrysler MS 6395
• Available in following grades: 0W-20, 0W-30, 0W-40, 5W-20, 5W-30, 5W-40, 5W-50, 10W-30, and 10W-60
• Plus a complete range of European specifications
• Try Castrol EDGE Full Synthetic motor oil today
• Unmatched Sludge and Wear Protection: Castrol EDGE 0W-20 Full Synthetic Motor Oil with Fluid TITANIUM Technology offers unparalleled sludge protection, ensuring your engine stays clean and runs smoothly.

FRAM Full Synthetic High Mileage SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

FRAM Full Synthetic High Mileage SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 0W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 0W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs
• Synthetic Blend Composition: Combines the benefits of synthetic and conventional oils to provide superior protection against sludge, wear, and burn-off, extending the life of your high mileage engine.
• High Mileage Engine Care: Designed for vehicles with high mileage, offering enhanced protection to keep your engine running smoothly and efficiently.
• Optimal Viscosity: With an SAE oil weight of 5W-20, this motor oil ensures optimal performance and protection in a wide range of temperatures and driving conditions.

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• Enhanced Oil Stability: Resists oil breakdown 10 times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

• 3X Stronger against viscosity breakdown than leading full synthetic (Based on Kurt Orbahn test in 5W-30 grade)
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)
• Advanced Fluid TITANIUM Technology: Castrol EDGE with Fluid TITANIUM Technology transforms its structure under pressure to keep metal parts apart and reduce friction, ensuring maximum engine performance.
• Full Synthetic Composition: As a full synthetic motor oil, Castrol EDGE 0W-20 offers superior protection and performance compared to conventional oils.
• Optimal for Modern Engines: Designed to meet the demands of today’s smaller, more powerful engines, providing excellent sludge protection, wear protection, and overall engine performance.