2019 Ford F-550 Super Duty Engine Cooling Parts

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

• Built to meet or exceed OE fit, form and function
• All components necessary for installation are supplied with pump
• 100% tested for reliable performance
• Follow all enclosed instructions to maximize pump life and validate warranty

Motorcraft gas and diesel engine water pumps contain a precision bearing to help deliver a long and efficient performance. Additionally, stamped or cast impellers meet OE pumping requirements.

Product Features:

• Seal designs use sintered metal or ceramic seats
• Strong cast-iron or aluminum die-cast housings
• Bearing housing meets OE load requirements
• Precision-ground bearings
• Hubs located for proper belt alignment
• Includes installation gasket

This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:

• This pump is used on accessory belt driven applications
• Used mostly on models equipped with a fan clutch
• It is highly recommended that the fan clutch be replaced with the water pump
• Equipped with weep chamber or similar feature to help prevent unnecessary replacement
• All gaskets or seals necessary for installation are supplied with pump

ENGINE WATER PUMP

DENSO is a leading supplier of radiators to OE car makers around the world. Manufacturers rely on our quality and innovation to remain on the leading edge of engine cooling technology. Our OE experience and know-how ensure our products provide unmatched performance, reliability and fitment. Radiator performance is essential for proper engine cooling and function. DENSO’s radiator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturer’s rigid standards. All DENSO radiators pass our strict durability and function tests. As the result, our radiators deliver reliable performance even under the most demanding conditions. Radiator types: Plastic tank with aluminum core. Plastic tank with copper core. Cross-flow and down-flow configurations. DENSO is known for the unsurpassed quality of its products. Plastic, copper or aluminum components: it doesn’t matter. Our DENSO radiators are dependable, lightweight and made to last. An investment in a DENSO radiator will pay dividends in the long run. Radiators can fail causing leaks or inefficient cooling. This can lead to your engine to run hotter which in turn creates excess wear and tear on the engine. DENSO radiators are designed with our First Time Fit® philosophy in mind. You get radiators that drop in easily without the need for adjustment, brackets or modification of any kind. Our radiators are precision built to provide the right part, the right fit, the first time.

Product Features:

• Fin Pitch – Superior fin waves provide a higher heat transfer.
• Flow Configuration – Available in cross-flow and down-flow configurations.
• Aluminum or Copper Core – Thin-tube construction assures maximum cooling efficiency.

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

Radiator

New Platinum Pro Radiator, 6.8 Liter Gas Engine, 7.3 Liter Diesel Engine, 2Row

Product Features:

• 6.8 Liter Gas Engine, 7.3 Liter Diesel Engine, 2Row, Made Of Plastic and Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This coolant O-ring kit contains all the necessary O-rings to replace or repair the engine coolant pipe on specified vehicles.

Product Features:

• Cost-effective repair – this kit allows you to directly replace coolant tee and radiator hose O-rings
• Complete set – includes two large and one small O-ring
• Application specific – strictly designed for certain Ford F150 and Mustang model years
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust

Water Pipe O-Ring

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

• 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
• Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
• Brass sensor housing precision machined to meet or exceed OE thermal conductivity
• OE precision matched thermistor position for correct output parameters
• Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

• OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
• FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
• THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:

• Motorcraft Sender Assembly mounts inside a vehicle’s fuel tank and consists of the electric fuel pump and the fuel gauge sub-assembly that informs the instrument panel fuel level indicator how much fuel remains in the tank.
• Motorcraft Sender Assembly literally sends engine fuel to the engine under pressure created by the fuel pump.
• As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into Motorcraft Sender Assemblies, ensuring the most current technology.
• Motorcraft Sender Assemblies are built to last and engineered to perform under extreme conditions to meet Ford’s exacting OE specifications, performance and quality standards.

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

• Delphi temperature sensors deliver accurate readings and optimal performance
• Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
• Each sensor is electrically insulated to eliminate interference from other components in the vehicle
• Delphi temperature sensors are impervious to electrical noise and interference

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Unsurpassed quality you can trust

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust

Water Pump Hsng Gask

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

• All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
• MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
• MAHLE gaskets is the leader in Domestic, Asian and European applications
• The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design
• Manufactured for the sealing repair environment
• Validated for fit, form, and function
• Quality that you can trust